AVerMedia AVerTV Hybrid Speedy PCI-E: Difference between revisions
| Line 14: | Line 14: | ||
[[Image:Aver-speedy-pcie-TDA18271HDC1.jpg|thumb|left|250px|TDA18271HDC1]] |
[[Image:Aver-speedy-pcie-TDA18271HDC1.jpg|thumb|left|250px|TDA18271HDC1]] |
||
[[Image:Aver-speedy-pcie-WJCE6353.jpg|thumb|left|250px|Intel WJCE6353]] |
[[Image:Aver-speedy-pcie-WJCE6353.jpg|thumb|left|250px|Intel WJCE6353]] |
||
[[Image:Aver-speedy-pcie-SAA7136E1G-SAA7160ET.jpg|thumb| |
[[Image:Aver-speedy-pcie-SAA7136E1G-SAA7160ET.jpg|thumb|left|250px|NXP SAA7136E/1/G & PCI-E bridge NXP SAA7160ET]] |
||
===Identification=== |
===Identification=== |
||
Revision as of 15:36, 3 January 2009
| This article is a stub or is incomplete. |
| This article requires expansion. Please help add informative information if you can. |
What type of device and who released it?
Is it supported under Linux? Are there experimental drivers? (if yes, see below)
Overview/Features
Discuss the features and facets of the device here ... this means you
Components Used
list the hardware ICs and modules used by the device here ... this means you
Identification
03:00.0 0480: 1131:7160 (rev 03)
Subsystem: 1461:1455
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ea100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Count=1/32 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information <?>
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: SAA716x Hybrid
Kernel modules: saa716x_hybrid
Other Images
use the included code to insert other images if necessary ...
- Filename
description
- Filename
description
- ...
Making it Work
Firmware
is there any firmware specific information for this device? if so, list it here ... this means you
Drivers
drivers that can recognize this card here http://jusst.de/hg/saa716x/ so card recognizes as dvb device but no frontends currently supported
Sample kernel output
SAA716x Hybrid 0000:03:00.0: PCI INT A disabled
SAA716x Hybrid 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
SAA716x Hybrid 0000:03:00.0: setting latency timer to 64
DVB: registering new adapter (SAA716x dvb adapter)
Remote Control Support
discuss support for the remote control here
External Links
http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=425