3Dfx VoodooTV 100 PCI: Difference between revisions
Jump to navigation
Jump to search
m (Gateway or 3Dfx OEM moved to 3Dfx VoodooTV 100: name) |
(rework) |
||
| Line 1: | Line 1: | ||
An analogue PCI card from 3Dfx. |
|||
It is supported under Linux. |
|||
This page needs more information than the meager bits below. |
|||
'''Note''': The card was also made available on an OEM basis as the "STB TV FM PCI"; Gateway also denoted the STB OEM by P/N 6000704 |
|||
At the time of writing this page (May/2008) there are still quite a few of these pci cards around. This card is identified by a couple of different part numbers. This is one of those devices that ''should'' work. You may need to work and re-work the bttv and snd-bt87x module options and modprobe options aggressively to be successful. |
|||
==Overview/Features== |
|||
| ⚫ | |||
* Composite in |
|||
| ⚫ | |||
* SVideo in (STB OEM only) |
|||
* FM radio (STB OEM only) |
|||
===Components Used=== |
|||
* Temic 4032FY5 (tuner module) ... the STB OEM used either a Temic API or Philips FM1236/F (see [http://www.bttv-gallery.de/] and [http://ubuntuforums.org/archive/index.php/t-408949.html]) |
|||
* STM TEA6420 (audio switch) |
|||
* Philips TDA9850 (audio decoder) |
|||
* STM TDA7432D (audio processor) |
|||
* Conexant BT878A (A/V decoder) |
|||
* Atmel 24c01a (eeprom) |
|||
===Identification=== |
|||
==Making it work== |
|||
FEATURES |
|||
This is one of those devices that ''should'' work, however, you may need to play with the bttv and snd-bt87x module options to be successful. |
|||
Video works, this is tuner dependent though. I got the NTSC tuner to work. |
|||
Television audio might work. The alsa developer and user lists offered no support with audio. |
|||
FM radio tuners are included in some versions. To date, this is an untested feature. |
|||
Revision as of 04:11, 4 January 2009
An analogue PCI card from 3Dfx.
It is supported under Linux.
Note: The card was also made available on an OEM basis as the "STB TV FM PCI"; Gateway also denoted the STB OEM by P/N 6000704
Overview/Features
The card falls under the categorization as a Bttv devices (bt848, bt878) device. You will need a computer with at least 1.5MHZ CPU to get it working well in MythTV given, being a software based encoding device, the capture encoding will suck a whole lotta CPU cycles at NTSC 720x480.
- Composite in
- SVideo in (STB OEM only)
- FM radio (STB OEM only)
Components Used
- Temic 4032FY5 (tuner module) ... the STB OEM used either a Temic API or Philips FM1236/F (see [1] and [2])
- STM TEA6420 (audio switch)
- Philips TDA9850 (audio decoder)
- STM TDA7432D (audio processor)
- Conexant BT878A (A/V decoder)
- Atmel 24c01a (eeprom)
Identification
Making it work
This is one of those devices that should work, however, you may need to play with the bttv and snd-bt87x module options to be successful.