AVerMedia M103 (Hybrid) Mini PCI: Difference between revisions

Revision as of 11:03, 9 April 2009

Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description

This is a Hybrid DVB-T Mini PCI card from AverMedia.

The AverMedia M103 is supported under Linux since kernel 2.6.24.

Overview/Features

This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".

TV

Analog TV: Worldwide Analog Access
Digital TV: DVB-T
Stereo Sound: Yes

Input/Output

Inputs: 75 ohm TV Antenna Input
Outputs: None

Features

Windows XP MCE Compliant (XP MCE Certificated)
Unbundled Remote Control Supported
PCI v2.3 interface

Note: This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote. Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped (see later) to an other Audio device

Components Used

The following ICs and modules used by the device:

XC3028 - Xceive Silicon Tuner (for Hybrid system)
MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
SAA7135H - Philips Video Decoder and Broadcast Audio Decoder / PCI bridge (for worldwide sku)

Other Images

Block Diagram
Case Study

Identification

Provide here, for PCI/PCIe devices, the relevant output of lspci -vnn or, in the case of USB devices, lsusb -v . We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:

#  sudo lspci -vvnn -s 04:07
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Avermedia Technologies Inc Device [1461:f636]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: saa7134
	Kernel modules: saa7134

Making it Work

Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)

Firmware

Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.

Drivers

Provide the details of where the drivers and patches and necessary tools are available.

Sample Kernel Output

Provide the relevant portion of dmesg here. For example:

# dmseg
[...]
[   26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
[   26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
[   26.904838] saa7134 0000:04:07.0: setting latency timer to 64
[   26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
[   26.904858] saa7133[0]: board init: gpio is 220000
[   27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
[   27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
[   27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.116022] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   27.128129] saa7133[0]: i2c scan: found device @ 0xc2  [???]
[   27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
[   27.495472] xc2028 0-0061: creating new instance
[   27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.496778] firmware: requesting xc3028-v27.fw
[   27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   36.508063] (0), id 00000000000000ff:
[   36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   37.116657] saa7133[0]: registered device video0 [v4l2]
[   37.117502] saa7133[0]: registered device vbi0
[   37.144805] saa7134 ALSA driver for DMA sound loaded
[   37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
[   37.272116] xc2028 0-0061: attaching existing instance
[   37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   37.272742] DVB: registering new adapter (saa7133[0])
[   37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[   37.273160] mt352: mt352_init: hello
[...]
[   43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   46.293245] mt352: mt352_init: hello
[...]

Remote Control Support

Discuss support for the remote control here.

External Links

AverMedia M103 (Hybrid) product page (USA)

@@ Line 1: / Line 1: @@
-[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]
+[[Image:AverMedia_M103_Hybrid_MiniPCI.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]
-An [[ATSC]] [[ATSC PCI Cards|PCI card]] from [[KWorld]].
+This is a Hybrid [[DVB-T]] [[DVB-T PCI Cards|Mini PCI card]] from [[AverMedia]].
-The ATSC 115 is supported under Linux since kernel 2.6.24.
+The AverMedia M103 is supported under Linux since kernel 2.6.24.
-''Note: The page contents menu will automagically build itself, so you need not worry about it''
 ==Overview/Features==
+This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".
-''Discuss the features and facets of the device here. For example:''<br>
+TV
-* PCI v2.3 interface
+* Analog TV: Worldwide Analog Access
-* Inputs: Antenna (Composite)
+* Digital TV: DVB-T
+* Stereo Sound: Yes
+Input/Output
+* Inputs: 75 ohm TV Antenna Input
 * Outputs: None
-{{Note|This devices just has one input through a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video in and Remote}}
+Features
+* Windows XP MCE Compliant (XP MCE Certificated)
+* Unbundled Remote Control Supported
+* PCI v2.3 interface
+{{Note|This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
+Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped (see later) to an other Audio device}}
 ===Components Used===
-''List the hardware ICs and modules used by the device here. For example:''<br>
+''The following ICs and modules used by the device:''<br>
+* XC3028 - Xceive Silicon Tuner (for Hybrid system)
-* QT1010 (tuner)
+* MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
-* Intel/Zarlink MT352 (demodulator)
+* SAA7135H - Philips Video Decoder and Broadcast Audio Decoder / PCI bridge (for worldwide sku)
-* NXP/Philips SAA7130HL (A/V decoder and PCI Interface)
 ===Other Images===
-''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage.  For example:''<br>
 <gallery perrow=5>
+ Image:AverMedia_M103_Block_Diagram.png|Block Diagram
- Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
+ Image:AverMedia_M103_CaseStudy.png|Case Study
- Image:VideoMate_DVB-T220_remote.jpg|VideoMate DVB-T220 Remote
 </gallery>
@@ Line 31: / Line 41: @@
 ''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space.  For example:''<br>
  #  sudo lspci -vvnn -s 04:07
 :07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
-	Subsystem: Avermedia Technologies Inc Device [1461:f636]
+ 	Subsystem: Avermedia Technologies Inc Device [1461:f636]
-	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-	Latency: 64
+ 	Latency: 64
-	Interrupt: pin A routed to IRQ 17
+ 	Interrupt: pin A routed to IRQ 17
-	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
+ 	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
-	Capabilities: [40] Power Management version 2
+ 	Capabilities: [40] Power Management version 2
-		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
-		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-	Kernel driver in use: saa7134
+ 	Kernel driver in use: saa7134
-	Kernel modules: saa7134
+ 	Kernel modules: saa7134
 ==Making it Work==
@@ Line 110: / Line 119: @@
 ==External Links==
+* [http://www.avermedia-usa.com//AVerTV/Product/ProductDetail.aspx?Id=371&SI=true AverMedia M103 (Hybrid) product page (USA)]
-''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''<br>
-* [http://www.comprousa.com/en/product/t100t220/t220.html Compro T-220 product page]
-''Finally, add anything else that you think might be relevant under an appropriate heading.''

AVerMedia M103 (Hybrid) Mini PCI: Difference between revisions

Revision as of 11:03, 9 April 2009

Contents

Overview/Features

Components Used

Other Images

Identification

Making it Work

Firmware

Drivers

Sample Kernel Output

Remote Control Support

External Links

Navigation menu

AVerMedia M103 (Hybrid) Mini PCI: Difference between revisions

Revision as of 11:03, 9 April 2009

Overview/Features

Components Used

Other Images

Identification

Making it Work

Firmware

Drivers

Sample Kernel Output

Remote Control Support

External Links

Navigation menu

Search