TechniSat SkyStar HD: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
A [[DVB-S2]] [[DVB-S PCI Cards|PCI card]] by [[TechniSat]]. For the SkyStar HD'''2''' please see the [[Azurewave AD SP400 CI (VP-1041)|Azurewave AD-SP400 CI (Twinhan VP-1041)]]. |
A [[DVB-S2]] [[DVB-S PCI Cards|PCI card]] by [[TechniSat]]. For the SkyStar HD'''2''' please see the [[Azurewave AD SP400 CI (VP-1041)|Azurewave AD-SP400 CI (Twinhan VP-1041)]]. |
||
Supported since kernel 2.6.29. |
|||
Experimental support exists. |
|||
==Overview== |
==Overview== |
||
Apparently the card is actually a rebranded [[TechnoTrend TT-budget S2-3200]]. |
Apparently the card is actually a rebranded [[TechnoTrend TT-budget S2-3200]]. See that page for more details. |
||
===Components Used=== |
===Components Used=== |
||
| ⚫ | |||
* [[STMicroelectronics]] STB6100 (tuner ... found under the tin can) |
* [[STMicroelectronics]] [[STMicroelectronics STB6100|STB6100]] (tuner ... found under the tin can) |
||
* [[STMicroelectronics]] [[STMicroelectronics STB0899|STB0899]] (a "C2L" revision) (demodulator) |
* [[STMicroelectronics]] [[STMicroelectronics STB0899|STB0899]] (a "C2L" revision) (demodulator) |
||
* [[STMicroelectronics]] [[STMicroelectronics LNBP21|LNBP21]] (LNB supply and control IC) |
|||
| ⚫ | |||
It also supports an add-on [[CI]] slot. |
It also supports an add-on [[CI]] slot. |
||
| Line 40: | Line 41: | ||
===Modules=== |
===Modules=== |
||
With current drivers the required modules should all load correctly on boot. |
|||
You need to |
|||
modprobe stb0899 stb6100 saa7146 lnbp21 |
modprobe stb0899 stb6100 saa7146 lnbp21 |
||
modprobe budget-ci |
modprobe budget-ci |
||
| Line 47: | Line 50: | ||
DVB: Unable to find symbol stb6100_attach() |
DVB: Unable to find symbol stb6100_attach() |
||
As with all DVB drivers, if you don't see any cards and frontends in multiproto's menuconfig, enable I2C in your kernel config and in multiproto do make distclean afterwards. |
As with all DVB drivers, if you don't see any cards and frontends in multiproto's menuconfig, enable I2C in your kernel config and in multiproto do make distclean afterwards. |
||
'''Note:''' ''You can find these modules over at [http://jusst.de/hg/multiproto/ http://jusst.de/hg/multiproto/]'' |
|||
==External Links== |
==External Links== |
||
* [http://www.technisat.com/?site=produkte/produkteview.php&kid=29,100&pid=1747&reload TechniSat product page] |
* [http://www.technisat.com/?site=produkte/produkteview.php&kid=29,100&pid=1747&reload TechniSat product page] |
||
* [http://www.technotrend.de/2711/TT-budget__S2-3200.html TechnoTrend product page] |
* [http://www.technotrend.de/2711/TT-budget__S2-3200.html TechnoTrend product page] |
||
[[Category:DVB-S2 PCI Cards]] |
|||
Latest revision as of 00:40, 9 June 2009
A DVB-S2 PCI card by TechniSat. For the SkyStar HD2 please see the Azurewave AD-SP400 CI (Twinhan VP-1041).
Supported since kernel 2.6.29.
Overview
Apparently the card is actually a rebranded TechnoTrend TT-budget S2-3200. See that page for more details.
Components Used
- NXP/Philips SAA7146 (PCI bridge)
- STMicroelectronics STB6100 (tuner ... found under the tin can)
- STMicroelectronics STB0899 (a "C2L" revision) (demodulator)
- STMicroelectronics LNBP21 (LNB supply and control IC)
It also supports an add-on CI slot.
Identification
02:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Unknown device 1019
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at feaffc00 (32-bit, non-prefetchable) [size=512]
# lspci -v -n -s 02:06.0
02:06.0 0480: 1131:7146 (rev 01)
Subsystem: 13c2:1019
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at feaffc00 (32-bit, non-prefetchable) [size=512]
output from lspci -vvv
01:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Unknown device 1019
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e9cffc00 (32-bit, non-prefetchable)[size=512]
Drivers
See TechnoTrend TT-budget S2-3200.
Modules
With current drivers the required modules should all load correctly on boot.
modprobe stb0899 stb6100 saa7146 lnbp21 modprobe budget-ci
If you don't load the other modules first, you'll get
DVB: Unable to find symbol stb6100_attach()
As with all DVB drivers, if you don't see any cards and frontends in multiproto's menuconfig, enable I2C in your kernel config and in multiproto do make distclean afterwards.