Linux4Media cineS2 DVB-S2 Twin Tuner: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(→‎Identification: Added subvendor ID "abc4")
(→‎Making it Work: Update according to repo http://linuxtv.org/hg/~endriss/ngene/)
Line 50: Line 50:
Make sure that the external power supply is connected!!!
Make sure that the external power supply is connected!!!


===Firmware===
===Experimental driver (recommended)===


Build firmware from original ngene source code.
The experimental merge of the original driver with the v4l-dvb project is capable of using both tuners.

$ git clone git://projects.vdr-developer.org/mediapointer-dvb-s2.git
$ cd mediapointer-dvb-s2
$ make menuconfig
--> Multimedia support
--> Video capture adapters
<M> Micronas nGene support --> <M> selektieren, wenn nicht schon vorhanden
$ make
$ sudo make install
$ sudo depmod -ae --> zur Sicherheit
$ sudo modprobe ngene

===Original driver===

"To install the driver you need a Linux kernel 2.6.19 or higher. Other kernel versions might also work but are currently not tested." (see ngene/README)

The current implementation is only capable of using one tuner and doesn't support the [[S2API]].


$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz
$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz
$ tar xzf ngene.tgz
$ tar xzf ngene.tgz
$ cd ngene
$ cd ngene
$ make -f Makefile.bin ngene_17.fw
$ cp ngene_17.fw /lib/firmware/


===Experimental Driver===
Delete or uncomment line 57 and 59 in file ngene.c to ensure that variable <code>adapter_nr</code> will be set.


$ hg clone http://linuxtv.org/hg/~endriss/ngene/ v4l-dvb-ngene
//#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,28)
$ cd v4l-dvb-ngene
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
$ make
//#endif
$ sudo make install

$ make install
$ modprobe dvb_ngene


==External Links==
==External Links==

Revision as of 20:32, 25 December 2009

A nGene based DVB-S2 PCIe card from Ex-IT! Information Technology GmbH

Media-Pointer MP-S2² DVB-S2 Twin Tuner "Low Profile"

Overview/Features

  • PCI-e x1
  • Dual Tuner DVB-S/S2 card
  • Ultra-Low Profile

Components Used

Other Images

Identification

$ lspci -vvvnn
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720]
	Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
 	Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>

or:

$ lspci -vvvnn
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] 	
	Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4] 	
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 	
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 	
	Latency: 0, Cache Line Size: 4 bytes 	
	Interrupt: pin A routed to IRQ 7 	
	Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K] 	
	Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] 	
	Capabilities: <access denied>

Making it Work

Make sure that the external power supply is connected!!!

Firmware

Build firmware from original ngene source code.

$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz
$ tar xzf ngene.tgz
$ cd ngene
$ make -f Makefile.bin ngene_17.fw
$ cp ngene_17.fw /lib/firmware/

Experimental Driver

$ hg clone http://linuxtv.org/hg/~endriss/ngene/ v4l-dvb-ngene
$ cd v4l-dvb-ngene
$ make
$ sudo make install

External Links

Media-Pointer MP-S2² DVB-S2 Twin Tuner "Low Profile"