NetUP Dual DVB T C CI RF: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
Line 69: Line 69:
status 10 | signal ffff | snr ca3c | ber 00000000 | unc 0000000b | FE_HAS_LOCK
status 10 | signal ffff | snr ca3c | ber 00000000 | unc 0000000b | FE_HAS_LOCK
</pre>
</pre>

== See also ==

* [http://www.netup.tv/en-EN/dual_dvb-t-c-ci_card.php NetUP Dual DVB-T/C-CI] - manufacturer website

Revision as of 14:29, 27 February 2011

NetUP Dual DVB-T/C-CI RF from NetUP Inc.

Overview/Features

* PCI-e x1  
* Supports two DVB-T/DVB-C transponders simultaneously
* Supports two analog audio/video channels simultaneously
* Independent descrambling of two transponders
* Hardware PID filtering

Components Used

* Conexant CX23885 
* STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
* Xceive XC5000 silicon TV tuner
* Altera FPGA for Common Interafce
  • Front side of engineering prototype

    Front side of engineering prototype

Identification

PCI id: 1B55:e2e4 NetUP Dual DVB-T/C-CI RF card

Making it work

Check out linux kernel (experimental): 

git clone http://udev.netup.ru/git/v4l-dvb.git linux-2.6.35-netup
cd linux-2.6.35-netup
make menuconfig
make && make modules_install && make install

Change grub menu.lst config to boot new kernel (/boot/vmlinuz-2.6.35+).


Install firmware files into /lib/firmware folder: 

wget http://www.netup.tv/downloads/netup-dvb-t-c_firmware-v0.1.tbz2
tar xvfj netup-dvb-t-c_firmware-v0.1.tbz2
cp netup-dvb-t-c_firmware-v0.1/* /lib/firmware/

Tuning to DVB-C and DVB-T

Each port can be tuned to DVB-T or DVB-C using frontend0 or frontend1 accordingly.

For DVB-T use frontend0 

# tzap modul64
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 578000000 Hz
video pid 0x0000, audio pid 0x0821
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 |
status 10 | signal 0000 | snr 001b | ber bf8ec9c8 | unc 00000000 | FE_HAS_LOCK
status 10 | signal 0000 | snr 001b | ber bf8ec9c8 | unc 00000000 | FE_HAS_LOCK
status 10 | signal 0000 | snr 001b | ber bf8ec9c8 | unc 00000000 | FE_HAS_LOCK

For DVB-C use frontend1 

# czap -f 1 modul64
using '/dev/dvb/adapter0/frontend1' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.czap/channels.conf'
  2 modul64:578000000:INVERSION_AUTO:5900000:FEC_NONE:QAM_128:515:672:1509
  2 modul64: f 578000000, s 5900000, i 2, fec 0, qam 4, v 0x203, a 0x2a0, s 0x5e5
status 10 | signal ffff | snr b851 | ber 00000000 | unc 0000000b | FE_HAS_LOCK
status 10 | signal ffff | snr ca3c | ber 00000000 | unc 0000000b | FE_HAS_LOCK

See also

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=NetUP_Dual_DVB_T_C_CI_RF&oldid=28819"