TechnoTrend TT-connect S2-3650 CI: Difference between revisions
Decaturguy (talk | contribs) |
|||
(13 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]]. |
A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]]. Identical to the [http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3600 TechnoTrend TT-connect S2-3600], but bundled with a CI interface. |
||
It is currently unsupported, but experimental support has been attempted. |
It is currently unsupported, but experimental support has been attempted. |
||
Line 43: | Line 43: | ||
Make sure you haven't loaded any old dvb drivers. |
Make sure you haven't loaded any old dvb drivers. |
||
Here's a step by step howto: |
Here's a step by step howto: |
||
⚫ | |||
===S2API=== |
===S2API=== |
||
(at least for S2API there is no patch required anymore (july 2009), not tested: HDTV and Remote Control, tested and running: SDTV, CI with Alphacrypt CAM) |
|||
mkdir 3650 |
mkdir 3650 |
||
Line 57: | Line 58: | ||
insmod stb0899.ko verbose=0 |
insmod stb0899.ko verbose=0 |
||
insmod lnbp22.ko |
insmod lnbp22.ko |
||
insmod ttpci-eeprom.ko |
|||
insmod dvb-usb.ko |
insmod dvb-usb.ko |
||
insmod dvb-usb-pctv452e.ko |
insmod dvb-usb-pctv452e.ko |
||
⚫ | |||
===Multiproto=== |
===Multiproto=== |
||
Line 94: | Line 95: | ||
===Sample kernel output=== |
===Sample kernel output=== |
||
Linux 2.6.25.4 |
Linux 2.6.25.4 (multiproto) |
||
dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state. |
dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state. |
||
Line 110: | Line 111: | ||
pctv452e_tuner_attach Leave |
pctv452e_tuner_attach Leave |
||
input: IR-receiver inside an USB DVB receiver as /class/input/input5 |
input: IR-receiver inside an USB DVB receiver as /class/input/input5 |
||
dvb-usb: schedule remote query interval to 500 msecs. |
|||
pctv452e_power_ctrl: 0 |
|||
dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected. |
|||
usbcore: registered new interface driver pctv452e |
|||
usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw |
|||
Linux 2.6.27.2 (S2API) |
|||
dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state. |
|||
pctv452e_power_ctrl: 1 |
|||
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. |
|||
DVB: registering new adapter (Technotrend TT Connect S2-3650-CI) |
|||
pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. |
|||
dvb-usb: MAC address reading failed. |
|||
pctv452e_frontend_attach Enter |
|||
stb0899_attach: Attaching STB0899 |
|||
pctv452e: CI initialized. |
|||
pctv452e_frontend_attach Leave Ok |
|||
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... |
|||
pctv452e_tuner_attach Enter |
|||
stb6100_attach: Attaching STB6100 |
|||
pctv452e_tuner_attach Leave |
|||
input: IR-receiver inside an USB DVB receiver as /class/input/input8 |
|||
dvb-usb: schedule remote query interval to 500 msecs. |
dvb-usb: schedule remote query interval to 500 msecs. |
||
pctv452e_power_ctrl: 0 |
pctv452e_power_ctrl: 0 |
||
Line 118: | Line 142: | ||
===Driver Status=== |
===Driver Status=== |
||
Working: |
Working: |
||
- Remote Control |
- Remote Control |
||
- LNB Power (13/18V) |
- LNB Power (13/18V) |
||
- 22kHz |
- 22kHz |
||
Line 124: | Line 148: | ||
- DVB-S |
- DVB-S |
||
- DVB-S2 |
- DVB-S2 |
||
- Common Interface |
- Common Interface |
||
A problem with locking high symbol rate channels (DVB-S2 30000 3/4 transponders) has been reported a number |
|||
of times for the similar (but PCI not USB) [[TechnoTrend TT-budget S2-3200]], but has not been solved. |
|||
http://linuxtv.org/pipermail/linux-dvb/2009-January/031673.html, |
|||
http://linuxtv.org/pipermail/linux-dvb/2009-February/031779.html . |
|||
This problem also exists for the TT S2-3650 CI USB. |
|||
Such transponders can be found at [http://www.lyngsat.com/hd/1west.html Thor 0.8W] and [http://www.lyngsat.com/hd/hispa.html Hispasat 30.0W]. |
|||
A way to use the similar (but USB) TechnoTrend TT-connect S2-3650 CI to help fix problem has been suggested here: |
|||
http://www.spinics.net/lists/linux-media/msg01169.html . |
|||
Do you have the TT S2-3200 or TT S2-3650 ? Can you help debug the driver? |
|||
==External Links== |
==External Links== |
||
* [http://www.technotrend.com/2780/TT-connect__S2-3650_CI.html TechnoTrend TT-connect S2-3650 CI product page] |
* [http://www.technotrend.com/2780/TT-connect__S2-3650_CI.html TechnoTrend TT-connect S2-3650 CI product page] |
||
[[Category:DVB-S2 USB Devices]] |
Latest revision as of 12:26, 27 March 2011
A DVB-S2 USB 2.0 Device from TechnoTrend. Identical to the TechnoTrend TT-connect S2-3600, but bundled with a CI interface.
It is currently unsupported, but experimental support has been attempted.
Overview/Features
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.
Upon connection to the USB port, the devices' LED is orange and turns green upon module load.
The USB receiver comes with a black RC5 remote control. IR events can be read from /dev/input/eventX
Components Used
- Cypress CY7C68013A USB controller [1]
- STM STB0899 (demodulator) [2]
- STM STB6100 (tuner) [3]
- STM LNBP22 (LNB voltage regulator) [4]
- STM M24C64 (EEPROM containing USB controller firmware, MAC address) [5]
Identification
Vendor ID: 0B48
Product ID: 300A
Making it Work
What we know:
- it uses parts/all of the ttusb-USB-protocol
- isochronous Data transfer (whole TS only)
- no firmware is needed (budget device)
Drivers
The following drivers are needed for these devices:
- stb0899.ko - stb6100.ko - lnbp22.ko - ttpci-eeprom.ko - dvb-usb.ko - dvb-usb-pctv452e.ko
To use this device you have to have a tuning application that uses the new S2API or multiproto DVB api. There's a patched version of szap available (search mailing list).
Make sure you haven't loaded any old dvb drivers. Here's a step by step howto:
S2API
(at least for S2API there is no patch required anymore (july 2009), not tested: HDTV and Remote Control, tested and running: SDTV, CI with Alphacrypt CAM)
mkdir 3650 cd 3650 hg clone http://mercurial.intuxication.org/hg/s2-liplianin cd s2-liplianin make ; # there might be a few warnings. cd v4l insmod dvb-core.ko insmod stb6100.ko verbose=0 insmod stb0899.ko verbose=0 insmod lnbp22.ko insmod ttpci-eeprom.ko insmod dvb-usb.ko insmod dvb-usb-pctv452e.ko
Multiproto
mkdir 3650 cd 3650 hg clone -r 9036 http://jusst.de/hg/multiproto # Note these are patches against multiproto changeset 9036 wget http://hem.passagen.se/faruks/3650/pctv452e.txt patch -p0 < pctv452e.txt # Support for Common Interface, MAC address readout wget http://zapping.sf.net/pctv452e-ci-mac.patch patch -p0 < pctv452e-ci-mac.patch cd multiproto make ; # there might be a few warnings. cd v4l insmod dvb-core.ko insmod stb6100.ko verbose=0 insmod stb0899.ko verbose=0 insmod lnbp22.ko insmod ttpci-eeprom.ko insmod dvb-usb.ko insmod dvb-usb-pctv452e.ko # If you use 32-bit system and insmod complains about: error inserting 'stb0899.ko': -1 Unknown symbol in module. Edit this file: multiproto/linux/drivers/media/dvb/frontends/stb0899_algo.c change line 1547 from: offsetfreq = (s32)((s64)offsetfreq * ((s64)internal->master_clk / (s64)1000000) / ((s64)((1 << 30) / (s64)1000))); To: offsetfreq = ((((offsetfreq / 1024) * 1000) / (1<<7)) * (s32)(internal->master_clk/1000000)) / (s32)(1<<13);
Sample kernel output
Linux 2.6.25.4 (multiproto)
dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state. pctv452e_power_ctrl: 1 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Technotrend TT Connect S2-3650-CI) pctv452e_frontend_attach Enter stb0899_attach: Attaching STB0899 lnbp22_set_voltage: 2 (18V=1 13V=0) lnbp22_set_voltage: 0x60) pctv452e_frontend_attach Leave Ok DVB: registering frontend 0 (STB0899 Multistandard)... pctv452e_tuner_attach Enter stb6100_attach: Attaching STB6100 pctv452e_tuner_attach Leave input: IR-receiver inside an USB DVB receiver as /class/input/input5 dvb-usb: schedule remote query interval to 500 msecs. pctv452e_power_ctrl: 0 dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected. usbcore: registered new interface driver pctv452e usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
Linux 2.6.27.2 (S2API)
dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state. pctv452e_power_ctrl: 1 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Technotrend TT Connect S2-3650-CI) pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. dvb-usb: MAC address reading failed. pctv452e_frontend_attach Enter stb0899_attach: Attaching STB0899 pctv452e: CI initialized. pctv452e_frontend_attach Leave Ok DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... pctv452e_tuner_attach Enter stb6100_attach: Attaching STB6100 pctv452e_tuner_attach Leave input: IR-receiver inside an USB DVB receiver as /class/input/input8 dvb-usb: schedule remote query interval to 500 msecs. pctv452e_power_ctrl: 0 dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected. usbcore: registered new interface driver pctv452e usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
Driver Status
Working:
- Remote Control - LNB Power (13/18V) - 22kHz - DiSEqC - DVB-S - DVB-S2 - Common Interface
A problem with locking high symbol rate channels (DVB-S2 30000 3/4 transponders) has been reported a number
of times for the similar (but PCI not USB) TechnoTrend TT-budget S2-3200, but has not been solved.
http://linuxtv.org/pipermail/linux-dvb/2009-January/031673.html,
http://linuxtv.org/pipermail/linux-dvb/2009-February/031779.html .
This problem also exists for the TT S2-3650 CI USB.
Such transponders can be found at Thor 0.8W and Hispasat 30.0W.
A way to use the similar (but USB) TechnoTrend TT-connect S2-3650 CI to help fix problem has been suggested here: http://www.spinics.net/lists/linux-media/msg01169.html .
Do you have the TT S2-3200 or TT S2-3650 ? Can you help debug the driver?