TerraTec Cinergy Hybrid T USB XS

TerraTec Cinergy Hybrid T USB XS is a USB 2.0 DVB-T device.

There are apparently several slightly different versions of the Cinergy Hybrid T USB XS.

Based on:

• Empiatech Em2880 usb bridge
• Xceive XC3028 tuner and analog IF demodulator
• Zarlink DVB-T demodulator (ZL10353 or MT352, depending upon version)

Both versions of the product that have USB ID 0ccd:0042 are supported in Linux kernel 2.6.31. The version with USB ID 0ccd:005e is not currently supported.

Terratec Cinergy Hybrid T USB XS 00cd:005e

• based on Empiatech Em2882

this device has a hybrid analog and digital tuner (dvb-t), analog teletext, a remote control (similar to the xxs) and analog input for acquisition of from analog video (standard s-video) and audio stereo source through rca connectors. after installation of v4l-dvb the device gets hotter and hotter. May cause damage.

dmesg output

I have a ubuntu lts 10.04 uname -r 2.6.32-32-generic. Still persists problems. With latest update of v4l-dvb drivers (dated 2 July 2011), works better. here is the output:

- usb 1-3: new high speed USB device using ehci_hcd and address 5
- usb 1-3: configuration #1 chosen from 1 choice
- IR NEC protocol handler initialized
- IR RC5(x) protocol handler initialized
- IR RC6 protocol handler initialized
- IR JVC protocol handler initialized
- IR Sony protocol handler initialized
- em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0)
- em28xx #0: chip ID is em2882/em2883
- em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
- em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
- em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
- em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
- em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
- em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
- em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
- em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
- em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
- em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
- em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
- em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 34 00 30 00 32 00 30 00 30 00
- em28xx #0: i2c eeprom f0: 33 00 30 00 31 00 38 00 00 00 00 00 00 00 00 00
- em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x6513b1be
- em28xx #0: EEPROM info:
- em28xx #0:	AC97 audio (5 sample rates)
- em28xx #0:	500mA max power
- em28xx #0:	Table at 0x27, strings=0x409e, 0x1cde, 0x346a
- em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55)
- tvp5150 3-005c: chip found @ 0xb8 (em28xx #0)
- tuner 3-0061: chip found @ 0xc2 (em28xx #0)
- xc2028 3-0061: creating new instance
- xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
- usb 1-3: firmware: requesting xc3028-v27.fw
- xc2028 3-0061: Error: firmware xc3028-v27.fw not found.
- Registered IR keymap rc-terratec-cinergy-xs
- input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input11
- rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0
- em28xx #0: Config register raw data: 0xd0
- em28xx #0: AC97 vendor ID = 0xffffffff
- em28xx #0: AC97 features = 0x6a90
- em28xx #0: Empia 202 AC97 audio processor detected
- tvp5150 3-005c: tvp5150am1 detected.
- em28xx #0: v4l2 driver version 0.1.2
- em28xx #0: V4L2 video device registered as video1
- em28xx #0: V4L2 VBI device registered as vbi0
- usbcore: registered new interface driver em28xx
- em28xx driver loaded
- em28xx-audio.c: probing for em28x1 non standard usbaudio
- em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
- Em28xx: Initialized (Em28xx Audio Extension) extension
- tvp5150 3-005c: tvp5150am1 detected.
- xc2028 3-0061: attaching existing instance
- xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
- em28xx #0: em28xx #0/2: xc3028 attached
- DVB: registering new adapter (em28xx #0)
- DVB: registering adapter 1 frontend 0 (Zarlink ZL10353 DVB-T)...
- em28xx #0: Successfully loaded em28xx-dvb
- Em28xx: Initialized (Em28xx dvb Extension) extension
- tvp5150 3-005c: tvp5150am1 detected.

Successfully created frontends, demuxer, dvr and net. correctly detectded and remote, i am not able hot to prove input component.

- user@user:~$ ls /dev/dvb/*
- demux0  dvr0  frontend0  net0

I have tried to extract firmware from the original emBDA.sys, emOEM.sys with any effort (obviusly modyfing hash of each in extract_3028). ANY1 can help me?

- user@user:~$ md5sum em*
- d163c2fa32265aacbb1b7eaf613fbdd4  emBDA.sys
- 2e7add4f70c336e4e66f68567fef01d5  emOEM.sys

- sudo perl terratec_extract_xc3028*
- Ran out of data

the inf windows file report:

- Cinergy Hybrid T USB XS (EM2882 DVB-T & analog & audio    , Rev. 3 EM2882)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_005E

the complete inf:

- ;==============================================================================
- ; Cinergy XS Series
- ; Driver Install Script (32 bit)
- ; Copyright (c) 2008-09, TerraTec Electronic GmbH
- ;------------------------------------------------------------------------------        
- ; History:
- ;------------------------------------------------------------------------------
- ; 31-Oct-08 FMB 1st driver v.5.08.0630.00 
- ; 22-Jan-09 FMB new driver v.5.08.1107.00 - 1st version with real DVB-C BDA device
- ; 20-Feb-09 FMB new driver v.5.09.0220.00 - Fixed FM and RDS which was corrupted in v.5.08.1107.00
- ; 03-Mar-09 FMB new driver v.5.09.0304.00 - added option to override NEC mode from 2-byte to 4-byte
- ;------------------------------------------------------------------------------
- ; Notes:
- ;------------------------------------------------------------------------------
- ;
- ;==============================================================================
- 
- [Version]
- Signature   = "$CHICAGO$"
- Class       = Media
- ClassGUID   = {4d36e96c-e325-11ce-bfc1-08002be10318} 
- Provider    = %Provider% 
- DriverVer   = 03/04/2009, 5.09.0304.00
- CatalogFile = Cinergy_XS_Series.cat
- 
- [SourceDisksNames]
- 1 = %DiskName%,, 
- 
- [SourceDisksFiles]
- emPRP.ax      = 1
- emOEM.sys     = 1
- emBDA.sys     = 1
- emAudio.sys   = 1
- emMON.exe     = 1
- merlinC.rom   = 1
- 
- [DestinationDirs]
- Cinergy.CopySys   = 12                  ; driver files
- 
- Cinergy.CopyDll32 = 11                  ; 32-bit DLLs
- 
- [ControlFlags]
- ExcludeFromSelect = *
- 
- 
- [Manufacturer]
- %Provider% = TerraTec, NTx86
-  
- [TerraTec.NTx86]
- ; Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 1)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0042&MI_00
- ;  Cinergy T USB XS (EM2870 DVB-T, Rev. 1)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0043
- ; Prodigy
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0047&MI_00
- ; Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 2 audio AM/stereo demodulator for France)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004C&MI_00
- ; Cinergy T USB XS (EM2870 DVB-T, Rev.2 with Microtune tuner)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\USB\VID_0CCD&PID_004E
- ; Cinergy Analog USB XS (EM2860 Analog + USB audio)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004F&MI_00
- ; Cinergy Hybrid T USB XS (EM2882 DVB-T & analog & audio    , Rev. 3 EM2882)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_005E
- ; Cinergy Hybrid T USB XS FM (EM2883 DVB-T & analog TV/FM & audio)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0072
- ; Cinergy HTC USB XS (EM2885 DVB-T & DVB-C & analog TV/FM & audio) 
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_008E
- ; Cinergy Hybrid T USB XS FM  Rev. 2 (EM2883 DVB-T & analog TV/FM & audio)
- %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0092 
- 
- 
- 
- [Cinergy.NTx86]
- Include       = ks.inf, kscaptur.inf, ksfilter.inf, bda.inf, wdmaudio.inf
- Needs         = KS.Registration, KSCAPTUR.Registration.NT, BDA.Installation.NT, WDMAUDIO.Registration.NT
- DelReg	      = OEM.DelReg, UTL.DelReg
- AddReg        = Cinergy.AddReg, OEM.AddReg, OEM.Defaults.AddReg, UTL.AddReg
- CopyFiles     = Cinergy.CopySys, Cinergy.CopyDll32, UTL.CopyList
- RegisterDlls  = Cinergy.RegisterDlls
- 

[Cinergy.CopySys] emBDA.sys emOEM.sys merlinC.rom

[Cinergy.CopyDll32] emPRP.ax

[Cinergy.RegisterDlls]

===============================================================

R e g i s t r y

===============================================================

[Cinergy.AddReg] HKR,,DevLoader,,*NTKERN

HKR,,Driver,,emBDA.sys

HKR,,NTMPDriver,,emBDA.sys

HKR,,OkToHibernate ,3,1

HKR,,PageOutWhenUnopened ,3,0

HKR,,DontSuspendIfStreamsAreRunning,3,1

HKR,,HardwareConfig,1,1

IBDA2800CustomProp

HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8},,,%CustomPlugIn% HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\InprocServer32,,,emPRP.ax HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\InprocServer32,ThreadingModel,,Both

This IID is aggregated for the filter given the CLSID of the property set

HKLM,System\CurrentControlSet\Control\MediaInterfaces\{846A4C4E-76D8-42ec-A333-121F365A4DA8},,,%CustomPlugIn% HKLM,System\CurrentControlSet\Control\MediaInterfaces\{846A4C4E-76D8-42ec-A333-121F365A4DA8},IID,1,4e,4c,6A,84, d8,76, ec,42, 0xa3, 0x33, 0x12, 0x1f, 0x36, 0x5a, 0x4d, 0xa8

Video Image Property Page

HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871},,,%CustomPropPage% HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871}\InprocServer32,,,emPRP.ax HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871}\InprocServer32,ThreadingModel,,Both

Associate property set with property page

HKLM,System\CurrentControlSet\Control\MediaSets\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\PropertyPages\{7F229794-410B-4e67-B492-4C80C2843871},,,%CustomPropPage%

Register Audio Pin Names

HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%PinNameGuid.AnalogAudioIn% ,"Name",,%PinName.AnalogAudioIn% HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%PinNameGuid.AnalogAudioOut% ,"Name",,%PinName.AnalogAudioOut%

--------------------- U T I L ---------------------------

[UTL.DelReg] HKLM, %AUTORUN%, emMON

[UTL.AddReg]

HKLM, %AUTORUN%, emMON,,"emMON.exe"

[UTL.CopyList] emMON.exe

------------------------- O E M ------------------------

[OEM.DelReg] HKR,settings\OEMSettings

[OEM.AddReg]

The sub-section below adds the driver configurations, regardless of

EEPROM's presence. These configurations are not specified in EEPROM.

===== BEGIN =====

HKR,settings\OEMSettings,Optimization ,0x00010001,1  ; 1=ISO, 2=Bulk HKR,settings\OEMSettings,FixUpOWC ,0x00010001,12  ; HKR,settings\OEMSettings,FixUpATI ,0x00010001,0  ; 1=enabled for multiple root hubs HKR,settings\OEMSettings,EnablePAL640x576 ,0x00010001,0  ; For 2820/2840 HKR,settings\OEMSettings,XceiveMTS ,0x00010001,0  ; XC3028 Baseband Audio HKR,settings\OEMSettings,IRType ,0x00010001,0x44  ; [3:0] 0x4=NEC-4, [6] 0x1=4-byte

HKR,settings\OEMSettings,OemID ,0x00010001,0  ;

HKR,settings\OEMSettings,BufferCount ,0x00010001,16  ; for CAP/VBI

HKR,settings\OEMSettings,BufferCountTS ,0x00010001,16  ; for TS

HKR,settings\OEMSettings,BufferCountAudio ,0x00010001,16  ; for Audio

HKR,settings\OEMSettings,StrictHeader ,0x00010001,0  ;

HKR,settings\OEMSettings,PowerControl ,0x00010001,0  ;

HKR,settings\OEMSettings,MaximumSS ,0x00010001,32  ; Max Signal Strength

HKR,settings\OEMSettings,XC5000FMInput ,0x00010001,0  ; 1=RF1, 2=RF2

HKR,settings\OEMSettings,NXP18271FMInput ,0x00010001,9  ; 1=RF1, 2=RF2

HKR,settings\OEMSettings,NXP18271FMThreshold,0x00010001,0x0fffff;

DRXJ IF Level Threshold

HKR,settings\OEMSettings,DRXJIFLevelThreshold,0x00010001,0

Additional delay required before reading Freq Offset (ms).

HKR,settings\OEMSettings,FreqOffsetDelay,0x00010001,0

AC97 source balance adjustments - valid range 0..127

HKR,settings\OEMSettings,AC97VolumeTV,0x00010001,64  ;

HKR,settings\OEMSettings,AC97VolumeFM,0x00010001,64  ;

HKR,settings\OEMSettings,AC97VolumeLN,0x00010001,64  ; Line IN

Demod AGC Target

HKR,settings\OEMSettings,AGCTarget6_352,0x00010001,40; 352, 6 MHz

HKR,settings\OEMSettings,AGCTarget7_352,0x00010001,40; 352, 7 MHz

HKR,settings\OEMSettings,AGCTarget8_352,0x00010001,40; 352, 8 MHz

HKR,settings\OEMSettings,AGCTarget6_353,0x00010001,49; 353, 6 MHz

HKR,settings\OEMSettings,AGCTarget7_353,0x00010001,49; 353, 7 MHz

HKR,settings\OEMSettings,AGCTarget8_353,0x00010001,49; 353, 8 MHz

VBI Parameters

HKR,settings\OEMSettings,VBIMinStart,0x00010001,454

HKR,settings\OEMSettings,VBIMaxStart,0x00010001,1000

HKR,settings\OEMSettings,VBIActualStart,0x00010001,950

HKR,settings\OEMSettings,VBIActualEnd,0x00010001,6373

DAT Threshold

HKR,settings\OEMSettings,DATThreshold352,0x00010001,60

HKR,settings\OEMSettings,DATThreshold353,0x00010001,60

QT1010 LNA & PCB Options

HKR,settings\OEMSettings,QT1010LNA ,0x00010001,0  ; 1=enabled HKR,settings\OEMSettings,QT1010V3 ,0x00010001,1  ; 0/1/2/3

GPIO for AM DEMOD

HKR,settings\OEMSettings,AMDEMOD,0x00010001,2  ; 2=GPIO2, 6=GPIO6

ATSC Default Mode

HKR,settings\OEMSettings,ATSCMode ,0x00010001,0  ; 0=VSB8, 1=QAM64, 2=QAM256

MCE

HKR,settings\OEMSettings,IsMCE ,0x00010001,2  ; 1=MCE, 0=non-MCE, ; 2=use EEPROM setting

HKLM,SYSTEM\CurrentControlSet\Services\USB28xxBGA\Settings\OEM,MVBroadcast,0x00010001,0

2nd instance of anolog video

HKR,settings\OEMSettings,MaxRawFormat ,0x00010001,16 ;max bpp allowed

HKR,settings\OEMSettings,EnableVBI2 ,0x00010001,1 ;default = EnableVBI1

(Cinergy XS Series) DRX-K PLL settling time for FM radio (400 msec is default)

HKR,settings\OEMSettings,DRXFMDelay,0x00010001,150

===== END =====

The following configurations are only needed if EEPROM is not present.

===== BEGIN =====

----- Board Configurations -----

HKR,settings\OEMSettings,Composite,0x00010001,1  ; Composite Input HKR,settings\OEMSettings,SVideo,0x00010001,1  ; S-Video Input HKR,settings\OEMSettings,SonyOnBoard,0x00010001,0  ; Sony Modules

----- Driver Configurations -----

HKR,settings\OEMSettings,StrictI2cAccess ,0x00010001,0  ; 0=Normal, 1=Strict HKR,settings\OEMSettings,VideoSwitchMode ,0x00010001,1  ; 0=Freeze, 1=Blackout HKR,settings\OEMSettings,EnableSquarePixel ,0x00010001,1  ; 1=enabled HKR,settings\OEMSettings,Enable704 ,0x00010001,0  ; 1=enabled HKR,settings\OEMSettings,DSFineTune ,0x00010001,1  ; 1=enabled HKR,settings\OEMSettings,GPIObyAP ,0x00010001,0  ; HKR,settings\OEMSettings,TVTuneByAP ,0x00010001,0  ; HKR,settings\OEMSettings,PowerOffIfIdle ,0x00010001,0  ; for TV tuner

----- OEM Devices Accessed from Applications Directly -----

HKR,settings\OEMSettings,Oem0I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem0Type ,0x00010001,2 HKR,settings\OEMSettings,Oem1I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem1Type ,0x00010001,2 HKR,settings\OEMSettings,Oem2I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem2Type ,0x00010001,2 HKR,settings\OEMSettings,Oem3I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem3Type ,0x00010001,2

----- Tuner CFG & Overrides -----

HKR,settings\OEMSettings,TunerIDBase ,0x00010001,0

HKR,settings\OEMSettings,TunerID7 ,0x00010001,21 ;CFG7 = SAM9082

----- USB/Ext Audio Mux for 2820/2840 Only -----

HKR,settings\OEMSettings,USBAudioMux ,0x00010001,1

HKR,settings\OEMSettings,ExtAudioMux ,0x00010001,2

===== END =====

This section provides property defaults for the BDA driver.

If EEPROM is on board, some of these property defaults are provided

by EEPROM. The remaining property defaults are specified here.

A property default is only meaningful if the corresponding property

is not yet defined in the system registry.

[OEM.Defaults.AddReg] HKR,settings\PropDefaults,Brightness ,0x00010001,128  ; HKR,settings\PropDefaults,Contrast ,0x00010001,32  ; HKR,settings\PropDefaults,Hue ,0x00010001,64  ; HKR,settings\PropDefaults,Saturation ,0x00010001,32  ; HKR,settings\PropDefaults,Sharpness ,0x00010001,2  ; HKR,settings\PropDefaults,Gamma ,0x00010001,50  ;

HKR,settings\PropDefaults,Mirror ,0x00010001,0  ; 0=OFF, 1=ON HKR,settings\PropDefaults,Flip ,0x00010001,0  ; 0=OFF, 1=ON HKR,settings\PropDefaults,AutoExposure ,0x00010001,1  ; 0=OFF, 1=ON HKR,settings\PropDefaults,AEMode ,0x00010001,1  ; 0=Dark, 1=Normal HKR,settings\PropDefaults,AE_Level ,0x00010001,3  ; Target AE (0-6) HKR,settings\PropDefaults,Exposure ,0x00010001,4  ; HKR,settings\PropDefaults,LightTemperature ,0x00010001,0  ; HKR,settings\PropDefaults,LightFreq ,0x00010001,1  ; 0=60Hz, 1=50Hz HKR,settings\PropDefaults,AutoWhiteBalance ,0x00010001,1  ; 0=OFF , 1=ON HKR,settings\PropDefaults,AWB_R ,0x00010001,32  ; HKR,settings\PropDefaults,AWB_B ,0x00010001,32  ; HKR,settings\PropDefaults,WindowSize ,0x00010001,0  ; 0=640x480, 1=320x240, 2=1280x960 HKR,settings\PropDefaults,MonitorType ,0x00010001,0  ; 0=CRT, 1=LCD HKR,settings\PropDefaults,Volume ,0x00010001,0  ;

HKR,settings\PropDefaults,VideoStandard ,0x00010001,0x10  ; 1=NTSC, 0x10=PAL_B, 0x40000=SECAM_L HKR,settings\PropDefaults,Deinterlace ,0x00010001,1  ; 1=Weave, 2=Bob HKR,settings\PropDefaults,VCRMask ,0x00010001,0  ; # of lines masked out HKR,settings\PropDefaults,MaskColor ,0x00010001,1  ; 0=Gray, 1=Black

===============================================================

I n t e r f a c e s

===============================================================

[Cinergy.NTx86.Interfaces] AddInterface=%KSCATEGORY_AUDIOCAP% ,%REFGUID_AUDIO% ,Audio_Interface

AddInterface=%KSCATEGORY_VIDEO% ,%REFGUID_CAPTURE% ,AnalogCapture_Interface AddInterface=%KSCATEGORY_CAPTURE% ,%REFGUID_CAPTURE% ,AnalogCapture_Interface AddInterface=%KSCATEGORY_TVTUNER% ,%REFGUID_TVTUNER% ,AnalogTvTuner_Interface AddInterface=%KSCATEGORY_CROSSBAR% ,%REFGUID_CROSSBAR% ,AnalogCrossbar_Interface AddInterface=%KSCATEGORY_TVAUDIO% ,%REFGUID_TVAUDIO% ,AnalogTvAudio_Interface

AddInterface=%KSCATEGORY_BDA_RECEIVER%,%REFGUID_BDA_RECEIVER% ,BdaReceiver_Interface AddInterface=%KSCATEGORY_BDA_TUNER% ,%REFGUID_BDA_TUNER_T% ,BdaTunerT_Interface AddInterface=%KSCATEGORY_BDA_TUNER% ,%REFGUID_BDA_TUNER_C% ,BdaTunerC_Interface

---------------------------------------------------------------

WDM streaming interfaces (audio)

---------------------------------------------------------------

[Audio_Interface] AddReg=Audio_Interface.AddReg

[Audio_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.AudioCapture%

---------------------------------------------------------------

WDM streaming interfaces (analog TV/capture)

---------------------------------------------------------------

[AnalogCapture_Interface] AddReg=AnalogCapture_Interface.AddReg

[AnalogCapture_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.AnalogCapture% HKLM,%Name.Key%,"DSName",0,%DShow.AnalogCapture%

IAMVideoCompression installed as static interface on both output pins

HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} HKR,PinFactory\1\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956}

[AnalogTvTuner_Interface] AddReg=AnalogTvTuner_Interface.AddReg

[AnalogTvTuner_Interface.AddReg] HKR,,CLSID,,%PROXY_TVTUNER% HKR,,FriendlyName,,%DShow.AnalogTvTuner%

[AnalogCrossbar_Interface] AddReg=AnalogCrossbar_Interface.AddReg

[AnalogCrossbar_Interface.AddReg] HKR,,CLSID,,%PROXY_CROSSBAR% HKR,,FriendlyName,,%DShow.AnalogCrossbar%

[AnalogTvAudio_Interface] AddReg=AnalogTvAudio_Interface.AddReg

[AnalogTvAudio_Interface.AddReg] HKR,,CLSID,,%PROXY_TVAUDIO% HKR,,FriendlyName,,%DShow.AnalogTvAudio%

---------------------------------------------------------------

BDA interfaces

---------------------------------------------------------------

[BdaReceiver_Interface] AddReg=BdaReceiver_Interface.AddReg

[BdaReceiver_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalCapture%

[BdaTunerT_Interface] AddReg=BdaTunerT_Interface.AddReg

[BdaTunerT_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalTunerT%

[BdaTunerC_Interface] AddReg=BdaTunerC_Interface.AddReg

[BdaTunerC_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalTunerC%

===============================================================

S e r v i c e s

===============================================================

[Cinergy.NTx86.HW] AddReg = InstLowerFilter

[InstLowerFilter] HKR,,"LowerFilters",0x00010000,"USB28xxOEM"

[Cinergy.NTx86.Services] AddService = USB28xxBGA, 0x00000002, CinergyCap.ServiceInstall AddService = USB28xxOEM, 0x00000000, CinergyOem.ServiceInstall

[CinergyCap.ServiceInstall] DisplayName = %ServiceCap.FriendlyName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\emBDA.sys

[CinergyOem.ServiceInstall] DisplayName = %ServiceOem.FriendlyName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\emOEM.sys

===============================================================

S t r i n g s

===============================================================

[Strings]

---------------------------------------------------------------

Non-localizable (Windows)

---------------------------------------------------------------

Registry types

REG_SZ = 0x00000000 REG_MULTI_SZ = 0x00010000 REG_EXPAND_SZ = 0x00020000 REG_DWORD = 0x00010001

Service

ServiceType values

SERVICE_KERNEL_DRIVER = 0x00000001 SERVICE_FILE_SYSTEM_DRIVER = 0x00000002 SERVICE_ADAPTER = 0x00000004 SERVICE_RECOGNIZER_DRIVER = 0x00000008 SERVICE_WIN32_OWN_PROCESS = 0x00000010 SERVICE_WIN32_SHARE_PROCESS = 0x00000020 SERVICE_INTERACTIVE_PROCESS = 0x00000100 SERVICE_INTERACTIVE_SHARE_PROCESS= 0x00000120

Service

StartType values

SERVICE_BOOT_START = 0x00000000 SERVICE_SYSTEM_START = 0x00000001 SERVICE_AUTO_START = 0x00000002 SERVICE_DEMAND_START = 0x00000003 SERVICE_DISABLED = 0x00000004

Service

ErrorControl values

SERVICE_ERROR_IGNORE = 0x00000000 SERVICE_ERROR_NORMAL = 0x00000001 SERVICE_ERROR_SEVERE = 0x00000002 SERVICE_ERROR_CRITICAL = 0x00000003

DirectShow filter categories DirectShow category name

CLSID_InputAudio = "{33D9A762-90C8-11D0-BD43-00A0C911CE86}" KSCATEGORY_AUDIOCAP = "{33D9A762-90C8-11D0-BD43-00A0C911CE86}" ; Audio Capture Devices KSCATEGORY_AUDIO = "{6994AD04-93EF-11D0-A3CC-00A0C9223196}" KSCATEGORY_RENDER = "{65E8773E-8F56-11D0-A3B9-00A0C9223196}" ; Audio Renderers KSCATEGORY_TOPOLOGY = "{DDA54A40-1E4C-11D1-A050-405705C10000}" ; Audio Mixer Devices

KSCATEGORY_VIDEO = "{6994AD05-93EF-11D0-A3CC-00A0C9223196}" ;

KSCATEGORY_CAPTURE = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}" ; WDM Streaming capture Devices (audio & video) KSCATEGORY_TVTUNER = "{A799A800-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming TV Tuner Devices KSCATEGORY_CROSSBAR = "{A799A801-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming Crossbar Devices KSCATEGORY_TVAUDIO = "{A799A802-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming TV Audio Devices

KSCATEGORY_ENCODER = "{19689BF6-C384-48fd-AD51-90E58C79F70B}" ; WDM Streaming Encoder Devices KSCATEGORY_MULTIPLEXER = "{7A5DE1D3-01A1-452c-B481-4FA2B96271E8}" ; WDM Streaming Multiplexer Devices

KSCATEGORY_BDA_RECEIVER = "{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}" ; BDA Receiver Component KSCATEGORY_BDA_TUNER = "{71985F48-1CA1-11D3-9CC8-00C04F7971E0}" ; BDA Source Filters

Proxy CLSIDs (KsProxy.ax)

PROXY_CAPTURE = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}" PROXY_TVTUNER = "{266EEE40-6C63-11cf-8A03-00AA006ECB65}" PROXY_CROSSBAR = "{71F96460-78F3-11D0-A18C-00A0C9118956}" PROXY_TVAUDIO = "{71F96462-78F3-11D0-A18C-00A0C9118956}"

AUTORUN = "Software\Microsoft\Windows\CurrentVersion\Run"

---------------------------------------------------------------

Non-localizable (this driver)

---------------------------------------------------------------

Reference guids

REFGUID_AUDIO = "{8DBF1283-572E-4b01-BFCC-14CFEB772501}"

REFGUID_CAPTURE = "{54353D15-E717-4d94-B574-685CE1A209E9}" REFGUID_TVTUNER = "{12AF27FC-0911-461f-B190-D31117E603D0}" REFGUID_CROSSBAR = "{C2C9FB1B-795C-4b12-ADBE-D87C6A1D08FC}" REFGUID_TVAUDIO = "{08D111EA-EE84-4ddc-99B5-8885C6C64FCB}"

REFGUID_BDA_RECEIVER = "{BC102ACB-6095-451d-8ED6-16CF3C832EBC}" REFGUID_BDA_TUNER_T = "{7C8095AB-C110-40e5-9F4D-310858BBBF64}" REFGUID_BDA_TUNER_C = "{B50B8116-DA24-4f97-80D1-00451702C5F7}" REFGUID_BDA_TUNER_S = "{54FB4E45-D668-4d9f-BCBA-B257E8AFF339}"

Pin name GUIDS

PinNameGuid.AnalogAudioIn = "{78BA1331-8888-4246-BA66-232430A6A8B7}" PinNameGuid.AnalogAudioOut = "{8E09372B-3FC8-47c9-B1D3-1DF12A7817FC}"

Pin names

PinName.AnalogAudioIn = "Analog Audio In" PinName.AnalogAudioOut = "Audio"

Name.Key = "Software\USB2800\BDA" CustomPlugIn = "emPRP Custom Interface" CustomPropPage = "emPRP Custom Property Page"

---------------------------------------------------------------

Localizable

---------------------------------------------------------------

Provider = "TerraTec " DiskName = "Cinergy Driver CD"

Service strings

ServiceCap.FriendlyName = "Cinergy XS Capture service" ServiceOem.FriendlyName = "CInergy XS OEM service"

Device Manager

Cinergy.DeviceDesc = "Cinergy XS Series"

DirectShow filter names

DShow.AudioCapture = "Cinergy XS Series Audio"  ; KSCATEGORY_AUDIO

DShow.AnalogCapture = "Cinergy XS Series Analog Capture"  ; KSCATEGORY_CAPTURE DShow.AnalogTvTuner = "Cinergy XS Series Analog TV Tuner"  ; KSCATEGORY_TVTUNER DShow.AnalogCrossbar = "Cinergy XS Series Analog Crossbar"  ; KSCATEGORY_CROSSBAR DShow.AnalogTvAudio = "Cinergy XS Series Analog TV Audio"  ; KSCATEGORY_TVAUDIO

DShow.DigitalCapture = "Cinergy XS Series Digital Capture"  ; KSCATEGORY_BDA_RECEIVER(BDA Receiver Component) DShow.DigitalTunerT = "Cinergy XS Series DVB-T Tuner"  ; KSCATEGORY_BDA_TUNER (BDA Source Filters) DShow.DigitalTunerC = "Cinergy XS Series DVB-C Tuner"  ; KSCATEGORY_BDA_TUNER (BDA Source Filters)

Photographs and other info about version 0ccd:005e

The version with usb identifier 0ccd:005e (aka the "PAL-BG/Germany new version TT") seems to feature the Zarlink 10353 DVB-T demodulator (it has the WJCE6353).

• 

  Front

• 

  Back

• 

  Side

Printed on both the PCBs, near the USB connector:
AD803053T-A3
Bottom v.1.1

On the bigger integrated on the middle:
WJCE6353
W620AA46
(M)(C)'05 (e3)
(This seems a chip from intel for DVB-T demodulation http://intel.industrialpartner.com/semiconductors/wjce6353.htm)

The little chip with the yellow spot (first part of the 3rd line is partially unreadable):
ATMEL640
24C02BN
?U18

The even smaller chip near the USB connector:
PI3C3
306LE

dmesg output

This is the dmesg output plugging the USB device, taken with the 2.4.27 kernel from ArchLinux x86_64.

- usb 2-4: new high speed USB device using ehci_hcd and address 5
- usb 2-4: configuration #1 chosen from 1 choice
- em28xx new video device (0ccd:005e): interface 0, class 255
- em28xx Doesn't have usb audio class
- em28xx #0: Alternate settings: 8
- em28xx #0: Alternate setting 0, max size= 0
- em28xx #0: Alternate setting 1, max size= 0
- em28xx #0: Alternate setting 2, max size= 1448
- em28xx #0: Alternate setting 3, max size= 2048
- em28xx #0: Alternate setting 4, max size= 2304
- em28xx #0: Alternate setting 5, max size= 2580

External links

• http://linuxtv.org/pipermail/linux-dvb/2006-April/009809.html