TechniSat CableStar Combo HD CI: Difference between revisions

Revision as of 18:16, 3 November 2013

Overview/Features

A combined DVB-C and DVB-T USB 2.0 box (standard definition and high definition). The device contains a common interface slot and an integrated infrared receiver. A remote control is included.

It is supported by parching the device ids into the current releases of Linux.

Components Used

DRX 3913 JKA 2

http://www.tridentmicro.com/producttree/tv/dtv/drx/drx-39xyk/

CY7C68013A

EPM3128ATC144-10N

http://www.altera.com/cgi-bin/devsearch.pl?col=corp&qt=EPM3128

Identification

The USB id of this device is 14f7:0003

Making it Work

The Window drivers for this devices from TechniSat is named UDST7000Bda.sys, the same as the driver for the Technisat SkyStar USB 2 HD CI and TerraTec S7 DVB-S devices. These devices are supported by Linux with the az6027 driver. This gives some hope towards future Linux support for this device.

Firmware

~~dvb-usb-terratec-h7-drxk.fw~~ dvb-usb-terratec-h5-drxk.fw from http://linuxtv.org/downloads/firmware/ 0

Copy the firmware file to your hotplug directory (e.g. /lib/firmware/) and (when applied the patches from below) rename it to dvb-usb-technisat-cablestar-hdci-drxk.fw

Drivers

As the TechniSat CableStar Combo HD CI is a clone of the Terratec T7 card which is supported in the kernel v3.9.2 some small patches are needed to get the card working.

Log from initialization on kernel 3.9.2:

[ 5846.524448] usb 1-1.1: dvb_usb_v2: found a 'Technisat Combo HD CI' in cold state
[ 5846.524477] usb 1-1.1: dvb_usb_v2: downloading firmware from file 'dvb-usb-terratec-h7-az6007.fw'
[ 5846.542443] usb 1-1.1: dvb_usb_v2: found a 'Technisat Combo HD CI' in warm state
[ 5847.759051] usb 1-1.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 5847.759077] DVB: registering new adapter (Technisat Combo HD CI)
[ 5847.761918] usb 1-1.1: dvb_usb_v2: MAC address: c2:f7:14:03:00:00
[ 5847.763861] drxk: frontend initialized.
[ 5847.763975] usb 1-1.1: DVB: registering adapter 0 frontend 0 (DRXK)...
[ 5847.764816] drxk: Could not load firmware file dvb-usb-terratec-h7-drxk.fw.
[ 5847.764819] drxk: Copy dvb-usb-terratec-h7-drxk.fw to your hotplug directory!
[ 5847.765331] mt2063_attach: Attaching MT2063
[ 5847.765339] usb 1-1.1: dvb_usb_v2: 'Technisat Combo HD CI' successfully initialized and connected
[ 5847.813453] drxk: status = 0x639130d9
[ 5847.813458] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz
[ 5847.975123] DRXK driver version 0.9.4300
[ 6062.180856] mt2063: detected a mt2063 B3

lsusb:

Bus 001 Device 006: ID 14f7:0003 TechniSat Digital GmbH CableStar Combo HD CI
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x14f7 TechniSat Digital GmbH
  idProduct          0x0003 CableStar Combo HD CI
  bcdDevice            0.03
  iManufacturer           1 TechniSat Digital S.A.
  iProduct                2 CableStar Combo HD CI
  iSerial                 3 0008C9D91C8F
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval             100
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Patch

This are the needed patchs for the kernel 3.9.2 to get the device working.

dvb-usb-ids.h

diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index 419a2d6..4a53454 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -365,6 +365,7 @@
 #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
 #define USB_PID_TECHNISAT_USB2_HDCI_V1			0x0001
 #define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
+#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI		0x0003
 #define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
 #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
 #define USB_PID_CPYTO_REDI_PC50A			0xa803

az6007.c

diff --git a/drivers/media/usb/dvb-usb-v2/az6007.c b/drivers/media/usb/dvb-usb-v2/az6007.c
index 44c64ef3..c1051c3 100644
--- a/drivers/media/usb/dvb-usb-v2/az6007.c
+++ b/drivers/media/usb/dvb-usb-v2/az6007.c
@@ -68,6 +68,19 @@ static struct drxk_config terratec_h7_drxk = {
 	.microcode_name = "dvb-usb-terratec-h7-drxk.fw",
 };
 
+static struct drxk_config cablestar_hdci_drxk = {
+	.adr = 0x29,
+	.parallel_ts = true,
+	.dynamic_clk = true,
+	.single_master = true,
+	.enable_merr_cfg = true,
+	.no_i2c_bridge = false,
+	.chunk_size = 64,
+	.mpeg_out_clk_strength = 0x02,
+	.qam_demod_parameter_count = 2,
+	.microcode_name = "dvb-usb-technisat-cablestar-hdci-drxk.fw",
+};
+
 static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
 {
 	struct az6007_device_state *st = fe_to_priv(fe);
@@ -630,6 +643,27 @@ static int az6007_frontend_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int az6007_cablestar_hdci_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct az6007_device_state *st = adap_to_priv(adap);
+	struct dvb_usb_device *d = adap_to_d(adap);
+
+	pr_debug("attaching demod drxk\n");
+
+	adap->fe[0] = dvb_attach(drxk_attach, &cablestar_hdci_drxk,
+				 &d->i2c_adap);
+	if (!adap->fe[0])
+		return -EINVAL;
+
+	adap->fe[0]->sec_priv = adap;
+	st->gate_ctrl = adap->fe[0]->ops.i2c_gate_ctrl;
+	adap->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+
+	az6007_ci_init(adap);
+
+	return 0;
+}
+
 static int az6007_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dvb_usb_device *d = adap_to_d(adap);
@@ -868,6 +902,29 @@ static struct dvb_usb_device_properties az6007_props = {
 	}
 };
 
+static struct dvb_usb_device_properties az6007_cablestar_hdci_props = {
+	.driver_name         = KBUILD_MODNAME,
+	.owner               = THIS_MODULE,
+	.firmware            = AZ6007_FIRMWARE,
+
+	.adapter_nr          = adapter_nr,
+	.size_of_priv        = sizeof(struct az6007_device_state),
+	.i2c_algo            = &az6007_i2c_algo,
+	.tuner_attach        = az6007_tuner_attach,
+	.frontend_attach     = az6007_cablestar_hdci_frontend_attach,
+	.streaming_ctrl      = az6007_streaming_ctrl,
+/* ditch get_rc_config as it can't work (TS35 remote, I believe it's rc5) */
+	.get_rc_config       = NULL,
+	.read_mac_address    = az6007_read_mac_addr,
+	.download_firmware   = az6007_download_firmware,
+	.identify_state	     = az6007_identify_state,
+	.power_ctrl          = az6007_power_ctrl,
+	.num_adapters        = 1,
+	.adapter             = {
+		{ .stream = DVB_USB_STREAM_BULK(0x02, 10, 4096), }
+	}
+};
+
 static struct usb_device_id az6007_usb_table[] = {
 	{DVB_USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_6007,
 		&az6007_props, "Azurewave 6007", RC_MAP_EMPTY)},
@@ -875,6 +932,8 @@ static struct usb_device_id az6007_usb_table[] = {
 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
 	{DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2,
 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+	{DVB_USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI,
+		&az6007_cablestar_hdci_props, "Technisat CableStar Combo HD CI", RC_MAP_EMPTY)},
 	{0},
 };

External Links

@@ Line 23: / Line 23: @@
 ===Firmware===
 <strike>dvb-usb-terratec-h7-drxk.fw</strike> dvb-usb-terratec-h5-drxk.fw from [http://linuxtv.org/downloads/firmware/ http://linuxtv.org/downloads/firmware/ 0]
+Copy the firmware file to your hotplug directory (e.g. /lib/firmware/) and (when applied the patches from below) rename it to dvb-usb-technisat-cablestar-hdci-drxk.fw
 ===Drivers===

TechniSat CableStar Combo HD CI: Difference between revisions

Revision as of 18:16, 3 November 2013

Contents

Overview/Features

Components Used

DRX 3913 JKA 2

CY7C68013A

EPM3128ATC144-10N

Identification

Making it Work

Firmware

Drivers

Patch

External Links

Navigation menu

TechniSat CableStar Combo HD CI: Difference between revisions

Revision as of 18:16, 3 November 2013

Overview/Features

Components Used

DRX 3913 JKA 2

CY7C68013A

EPM3128ATC144-10N

Identification

Making it Work

Firmware

Drivers

Patch

External Links

Navigation menu

Search