TODO RC

Minor bugs/improvement

• struct ir_raw_event_ctrl member prev_ev. Investigate if this can be removed.
• if driver depends on RC_CORE, change this to select RC_CORE, depends on INPUT? OR use a patch like https://patchwork.linuxtv.org/patch/40601/ and remove "depends on RC_CORE".
• RC device RC_DRIVER_IR_RAW_TX leaks dev->raw on rc_unregister_device()?
• Unplug iguanair with lirc chardev open causes kernel to go bang
• CEC repeat code needs to move into rc-core
• mceusb can do wakeups. Allow this to be configured

Larger work

• Make it possible to load multiple keymaps with ir-keytable. It should detect if the new keymap conflicts with any already loaded keymap, and ensure the right protocols are selected.
  • Further improvement: make the kernel mapping rc_proto:scancode -> keycode, not just scancode. This should reduce the number of possible conflicts.
• Compare lirc rc6 decoder. Can it handle multiple keypresses? What repeat/delay times does it use? See https://bugzilla.kernel.org/show_bug.cgi?id=48761
• lirc_zilog rc core driver (Sean Young working on this)
• Once lirc_zilog is removed, remove lirc kapi. Example is here: https://git.linuxtv.org/syoung/media_tree.git/log/?h=lirc_scancodes
• Implement scancode reading and transmitting:
  • It's very hard to tell what protocol a remote is using
  • Kernel already has encoders, make sure they can be used for tx
  • CEC might want to reuse this interface
  • Patch series already exist for this
• MS MCE Keyboard keymap needs multiple protocols. Keymap needed to select it. https://www.mail-archive.com/linux-media@vger.kernel.org/msg115706.html
• ir-ctl should list available devices if run without any argument and allow to select device based on rc (based on /sys/class/rc/).
• Rework ir raw decoders; register should only happen when protocol enabled (so we don't get an MCE input device). Also if decoders not enabled, #ifdef a load of stuff out.