Linux4Media cineS2 DVB-S2 Twin Tuner: Difference between revisions
Jump to navigation
Jump to search
Twoofseven (talk | contribs) (→Making it Work: Update according to repo http://linuxtv.org/hg/~endriss/ngene/) |
m (→External Links: commercial hyperlink removed) |
||
(19 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
A [[NGene_devices|nGene]] based [[DVB-S2]] [[DVB-S2 PCIe Cards|PCIe card]] from [[ |
A [[NGene_devices|nGene]] based [[DVB-S2]] [[DVB-S2 PCIe Cards|PCIe card]] from [[Linux4Media]] |
||
[[Image:Media-Pointer_MP-S2_Front.jpg|right|thumb|200px| |
[[Image:Media-Pointer_MP-S2_Front.jpg|right|thumb|200px|Linux4Media cineS2 DVB-S2 Twin Tuner ]] |
||
==Overview/Features== |
==Overview/Features== |
||
* Full Linux Support |
|||
* PCI-e x1 |
* PCI-e x1 |
||
* Dual Tuner DVB-S/S2 card |
* Dual Tuner DVB-S/S2 card |
||
* Ultra-Low Profile |
* Ultra-Low Profile |
||
=== |
===Revision 5.x=== |
||
====Components Used==== |
|||
* [[NGene_devices|PCIe bridge MICRONAS APB 7202A B2]] |
* [[NGene_devices|PCIe bridge MICRONAS APB 7202A B2]] |
||
* [[STMicroelectronics_STV0900|Dual demodulator STM STV0900B]] |
* [[STMicroelectronics_STV0900|Dual demodulator STM STV0900B]] |
||
Line 14: | Line 17: | ||
* [[Dual LNB STM LNBH24]] |
* [[Dual LNB STM LNBH24]] |
||
===Other Images=== |
====Other Images==== |
||
<gallery perrow=5> |
<gallery perrow=5> |
||
Image:Media-Pointer_MP-S2_MICRONAS_APB_7202A_B2.jpg|PCIe bridge MICRONAS APB 7202A B2 |
Image:Media-Pointer_MP-S2_MICRONAS_APB_7202A_B2.jpg|PCIe bridge MICRONAS APB 7202A B2 |
||
Line 22: | Line 25: | ||
</gallery> |
</gallery> |
||
===Identification=== |
====Identification==== |
||
$ lspci -vvvnn |
$ lspci -vvvnn |
||
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] |
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] |
||
Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3] |
Subsystem: Micronas Semiconductor Holding AG Device <b>[18c3:abc3]</b> |
||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ |
||
Line 31: | Line 34: | ||
Interrupt: pin A routed to IRQ 16 |
Interrupt: pin A routed to IRQ 16 |
||
Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] |
Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] |
||
Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] |
|||
Capabilities: |
Capabilities: [40] Power Management version 2 |
||
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) |
|||
Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
|||
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- |
|||
Address: 0000000000000000 Data: 0000 |
|||
Capabilities: [58] Express (v1) Endpoint, MSI 00 |
|||
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us |
|||
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- |
|||
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- |
|||
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ |
|||
MaxPayload 128 bytes, MaxReadReq 512 bytes |
|||
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- |
|||
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited |
|||
ClockPM- Suprise- LLActRep- BwNot- |
|||
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- |
|||
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- |
|||
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- |
|||
Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 |
|||
Capabilities: [400] Virtual Channel <?> |
|||
Kernel driver in use: ngene |
|||
Kernel modules: ngene |
|||
or: |
or: |
||
$ lspci -vvvnn |
$ lspci -vvvnn |
||
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] |
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] |
||
Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4] |
Subsystem: Micronas Semiconductor Holding AG Device <b>[18c3:abc4]</b> |
||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx |
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ |
||
Latency: 0, Cache Line Size: |
Latency: 0, Cache Line Size: 32 bytes |
||
Interrupt: pin A routed to IRQ |
Interrupt: pin A routed to IRQ 16 |
||
Region 0: Memory at |
Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] |
||
Region 1: Memory at |
Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] |
||
Capabilities: |
Capabilities: [40] Power Management version 2 |
||
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) |
|||
Status: D0 PME-Enable- DSel=0 DScale=0 PME- |
|||
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- |
|||
Address: 0000000000000000 Data: 0000 |
|||
Capabilities: [58] Express (v1) Endpoint, MSI 00 |
|||
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us |
|||
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- |
|||
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- |
|||
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ |
|||
MaxPayload 128 bytes, MaxReadReq 512 bytes |
|||
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- |
|||
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited |
|||
ClockPM- Suprise- LLActRep- BwNot- |
|||
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- |
|||
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- |
|||
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- |
|||
Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 |
|||
Capabilities: [400] Virtual Channel <?> |
|||
Kernel driver in use: ngene |
|||
Kernel modules: ngene |
|||
or: (Revision V5.5) |
|||
03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] (rev 01) |
|||
Subsystem: Micronas Semiconductor Holding AG Device '''[18c3:dd00]''' |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 32 bytes |
|||
Interrupt: pin A routed to IRQ 10 |
|||
Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K] |
|||
Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] |
|||
Capabilities: [40] Power Management version 2 |
|||
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) |
|||
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- |
|||
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ |
|||
Address: 0000000000000000 Data: 0000 |
|||
Capabilities: [58] Express (v1) Endpoint, MSI 00 |
|||
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us |
|||
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- |
|||
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- |
|||
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ |
|||
MaxPayload 128 bytes, MaxReadReq 512 bytes |
|||
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- |
|||
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited |
|||
ClockPM- Surprise- LLActRep- BwNot- |
|||
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ |
|||
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- |
|||
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- |
|||
Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 |
|||
Capabilities: [400] Virtual Channel <?> |
|||
===Revision 6.2=== |
|||
Revision 6.2 differs significantly from the previous versions. Instead of the micronas PCIe-bridge there is now the [http://www.latticesemi.com/products/fpga/ecp3/index.cfm Lattice ECP3-FCPGA]. The |
|||
====Components Used==== |
|||
* [[Lattice ECP3]] |
|||
* [[STMicroelectronics_STV0900|Dual demodulator STM STV0900B]] |
|||
* [[ST_STV6110A|Tuner STM STV6110A]] |
|||
* [[Dual LNB STM LNBH24]] |
|||
====Other Images==== |
|||
<gallery perrow=5> |
|||
[[File:Example.jpg]] |
|||
</gallery> |
|||
====Identification==== |
|||
$ lspci -vvvnn |
|||
03:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus LE DVB adapter [dd01:0003] |
|||
Subsystem: Digital Devices GmbH Device [dd01:0020] |
|||
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 11 |
|||
Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] |
|||
Capabilities: [50] Power Management version 3 |
|||
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) |
|||
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- |
|||
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+ |
|||
Address: 0000000000000000 Data: 0000 |
|||
Capabilities: [90] Express (v2) Endpoint, MSI 00 |
|||
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us |
|||
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- |
|||
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- |
|||
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- |
|||
MaxPayload 128 bytes, MaxReadReq 512 bytes |
|||
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- |
|||
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 <1us |
|||
ClockPM- Surprise- LLActRep- BwNot- |
|||
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ |
|||
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- |
|||
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- |
|||
DevCap2: Completion Timeout: Range A, TimeoutDis+ |
|||
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- |
|||
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB |
|||
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- |
|||
Compliance De-emphasis: -6dB |
|||
LnkSta2: Current De-emphasis Level: -6dB |
|||
Capabilities: [100] Vendor Specific Information <?> |
|||
Kernel driver in use: DDBridge |
|||
Kernel modules: ddbridge |
|||
==Making it Work== |
==Making it Work== |
||
Line 52: | Line 177: | ||
===Firmware=== |
===Firmware=== |
||
$ wget http://www.digitaldevices.de/download/ngene_15.fw |
|||
Build firmware from original ngene source code. |
|||
$ cp ngene_15.fw /lib/firmware/ |
|||
Device [18c3:dd00] needs Firmware >= 18 |
|||
$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz |
|||
$ wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw |
|||
$ tar xzf ngene.tgz |
|||
$ sudo cp ngene_18.fw /lib/firmware |
|||
$ cd ngene |
|||
$ make -f Makefile.bin ngene_17.fw |
|||
$ cp ngene_17.fw /lib/firmware/ |
|||
=== |
===Driver=== |
||
$ hg clone http://linuxtv.org/hg/ |
$ hg clone http://linuxtv.org/hg/v4l-dvb/ |
||
$ cd v4l-dvb |
$ cd v4l-dvb |
||
$ make |
$ make |
||
$ |
$ make install |
||
Also supported by the [[s2-liplianin]] v4l branch. |
|||
On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver RPM >= 20110208_132512-98.el6 from ATRPMS Repository. |
|||
==External Links== |
==External Links== |
||
[http:// |
[http://digitaldevices.de/Cine_S2.html CineS2 DVB-S2 Twin Tuner "Low Profile"] |
||
[[Category:DVB-S2 PCIe Cards]] |
[[Category:DVB-S2 PCIe Cards]] |
Latest revision as of 11:25, 20 October 2013
A nGene based DVB-S2 PCIe card from Linux4Media
Overview/Features
- Full Linux Support
- PCI-e x1
- Dual Tuner DVB-S/S2 card
- Ultra-Low Profile
Revision 5.x
Components Used
- PCIe bridge MICRONAS APB 7202A B2
- Dual demodulator STM STV0900B
- Tuner STM STV6110A
- Dual LNB STM LNBH24
Other Images
Identification
$ lspci -vvvnn 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 Capabilities: [400] Virtual Channel <?> Kernel driver in use: ngene Kernel modules: ngene
or:
$ lspci -vvvnn 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 Capabilities: [400] Virtual Channel <?> Kernel driver in use: ngene Kernel modules: ngene
or: (Revision V5.5)
03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] (rev 01) Subsystem: Micronas Semiconductor Holding AG Device [18c3:dd00] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [400] Virtual Channel <?>
Revision 6.2
Revision 6.2 differs significantly from the previous versions. Instead of the micronas PCIe-bridge there is now the Lattice ECP3-FCPGA. The
Components Used
Other Images
Identification
$ lspci -vvvnn 03:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus LE DVB adapter [dd01:0003] Subsystem: Digital Devices GmbH Device [dd01:0020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [90] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range A, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: DDBridge Kernel modules: ddbridge
Making it Work
Make sure that the external power supply is connected!!!
Firmware
$ wget http://www.digitaldevices.de/download/ngene_15.fw $ cp ngene_15.fw /lib/firmware/
Device [18c3:dd00] needs Firmware >= 18
$ wget http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/ngene_18.fw $ sudo cp ngene_18.fw /lib/firmware
Driver
$ hg clone http://linuxtv.org/hg/v4l-dvb/ $ cd v4l-dvb $ make $ make install
Also supported by the s2-liplianin v4l branch.
On RHEL / Centos / Scientific Linux 6.x the card works with video4linux driver RPM >= 20110208_132512-98.el6 from ATRPMS Repository.