Talk:Sabrent TV-USBHD: Difference between revisions

Latest revision as of 22:22, 20 March 2012

The following works. Kernel 3.2.1 didn't even have this entry. --dattaway

I'd like to mention here after much struggle with this I was able to get it to work by adding two simple lines to a file (in Ubuntu 10.10).

Get the current release as described on this site (the easy way) run the following commands: make -C linux/ download make -C linux/ untar

the edit ~/media_build/linux/drivers/media/video/au0828/au0828-cards.c

At the very end of the file you will see { USB_DEVICE(0x2040, 0x8200), .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },

Add this to the line immediately following:

       { USB_DEVICE(0x05e1, 0x0400),
               .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },

{ },

then type make.

Note, this only works on the Sabrent card with the tda18271 chipset but it works now flawlessly after messing around for 2 years.

Revision as of 05:39, 18 February 2011 (view source) Grassmunk (talk \| contribs) (Created page with 'I'd like to mention here after much struggle with this I was able to get it to work by adding two simple lines to a file (in Ubuntu 10.10). Get the current release as described...')		Latest revision as of 22:22, 20 March 2012 (view source) Dattaway (talk \| contribs) m (The following works. Kernel 3.2.1 didn't even have this entry.)
Line 1:		Line 1:
			The following works. Kernel 3.2.1 didn't even have this entry. --dattaway

	I'd like to mention here after much struggle with this I was able to get it to work by adding two simple lines to a file (in Ubuntu 10.10).		I'd like to mention here after much struggle with this I was able to get it to work by adding two simple lines to a file (in Ubuntu 10.10).