Technisat SkyStar USB HD: Difference between revisions
m (updated hyperlinks) |
(Describe DiSEqC support status) |
||
(12 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[Image:TechniSat_SkyStar_USB_HD.jpg| |
[[Image:TechniSat_SkyStar_USB_HD.jpg|left|300px|TechniSat SkyStar USB HD]] |
||
⚫ | |||
⚫ | |||
Drivers are included in kernel branch 2.6.39 (Maybe in earlier versions, too. I was too lazy to search the exact commit. Feel free to edit if you know) |
Drivers are included in kernel branch 2.6.39 (Maybe in earlier versions, too. I was too lazy to search the exact commit. Feel free to edit if you know) |
||
[[Image:TechniSat_SkyStar_USB_HD_packaging.jpg|200px|TechniSat SkyStar USB HD packaging]] |
|||
[[Image:TechniSat_SkyStar_USB_HD_internal.jpg|250px|TechniSat SkyStar USB HD internal]] |
|||
[[Image:TechniSat_SkyStar_USB_HD_back.jpg|250px|TechniSat SkyStar USB HD PCB backside]] |
|||
[[Image:TechniSat_SkyStar_USB_HD_tuner.jpg|250px|TechniSat SkyStar USB HD tuner section]] |
|||
==Overview/Features== |
==Overview/Features== |
||
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.<br/> |
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.<br/> |
||
The device has a red power-LED that is on as long as the box is powered by the external power supply. A green LED indicates that the tuner has locked. |
The device has a red power-LED that is on as long as the box is powered by the external power supply. A green LED indicates that the tuner has locked.<br/> |
||
Additionally, an IR-remote is shipped with the receiver-IR-diode sitting in the USB-connected box right beside the two status LEDs (see pictures above). The IR-receiver is detected by the kernel but I didn't test it since I have no use for it. |
|||
===Components Used=== |
===Components Used=== |
||
Tuner: [[ST_STV6110A|STV6110A]]<br /> |
|||
STV6110x |
|||
Demod: STV0903B (includes LNB-controller and DiSEqC 2.x interface)<br /> |
|||
Microcontroller/Bridge/USB Interface: Cypress CY7C68013A-56<br /> |
|||
===Identification=== |
===Identification=== |
||
Line 22: | Line 30: | ||
===Drivers=== |
===Drivers=== |
||
Drivers are included in Linux Mainline since 2.6.39 (or earlier). The device can be found here<pre>Device Drivers -> Multimedia support -> DVB/ATSC adapters -> Support for various USB DVB devices -> Technisat DVB-S/S2 USB2.0 support</pre><br /> |
Drivers are included in Linux Mainline since 2.6.39 (or earlier). The device can be found here<pre>Device Drivers -> Multimedia support -> DVB/ATSC adapters -> Support for various USB DVB devices -> Technisat DVB-S/S2 USB2.0 support</pre><br /> |
||
DiSEqC is working perfectly fine. One user reports that it worked with Linux 3.6.6 and tvheadend using 4 LNBs. Unicable (old and new standard) are working fine as well using tvheadend. |
|||
I don't know whether DiSeqc works since I have nothing to test. The hardware supports it for sure but there are no references in the driver's source. |
|||
=== lsusb output === |
=== lsusb output === |
||
Line 170: | Line 178: | ||
==External Links== |
==External Links== |
||
* [ |
* [https://www.technisat.com/en_XX/SkyStar-USB-HD/352-2675-1648/ TechniSat product page] |
||
[[Category: DVB-S2 USB Devices]] |
[[Category: DVB-S2 USB Devices]] |
Latest revision as of 08:05, 15 September 2017
A DVB-S2 USB 2.0 Device from TechniSat. On the manufacturer's homepage there are no hints about Linux support but there is tux on the packaging.
Drivers are included in kernel branch 2.6.39 (Maybe in earlier versions, too. I was too lazy to search the exact commit. Feel free to edit if you know)
Overview/Features
This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.
The device has a red power-LED that is on as long as the box is powered by the external power supply. A green LED indicates that the tuner has locked.
Additionally, an IR-remote is shipped with the receiver-IR-diode sitting in the USB-connected box right beside the two status LEDs (see pictures above). The IR-receiver is detected by the kernel but I didn't test it since I have no use for it.
Components Used
Tuner: STV6110A
Demod: STV0903B (includes LNB-controller and DiSEqC 2.x interface)
Microcontroller/Bridge/USB Interface: Cypress CY7C68013A-56
Identification
USB VID: 14F7
USB PID: 0500
Making it Work
Firmware
The needed firmware file dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw can be fetched from http://kernellabs.com/firmware/technisat-usb2. After download, move/copy it to /lib/firmware/
Drivers
Drivers are included in Linux Mainline since 2.6.39 (or earlier). The device can be found here
Device Drivers -> Multimedia support -> DVB/ATSC adapters -> Support for various USB DVB devices -> Technisat DVB-S/S2 USB2.0 support
DiSEqC is working perfectly fine. One user reports that it worked with Linux 3.6.6 and tvheadend using 4 LNBs. Unicable (old and new standard) are working fine as well using tvheadend.
lsusb output
Bus 001 Device 003: ID 14f7:0500 TechniSat Digital GmbH DVB-PC TV Star HD Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x14f7 TechniSat Digital GmbH idProduct 0x0500 DVB-PC TV Star HD bcdDevice 0.01 iManufacturer 1 TechniSat Digital iProduct 2 TechniSat USB device iSerial 3 XXXXXXXXXXX bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 69 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 300mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0c00 2x 1024 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered
Sample Kernel Output
[ 57.920057] usb 1-5: new high speed USB device number 3 using ehci_hcd [ 58.070871] usb 1-5: New USB device found, idVendor=14f7, idProduct=0500 [ 58.070877] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 58.070882] usb 1-5: Product: TechniSat USB device [ 58.070886] usb 1-5: Manufacturer: TechniSat Digital [ 58.070889] usb 1-5: SerialNumber: XXXXXXXXXXXX [ 58.071273] technisat-usb2: set alternate setting [ 58.071365] technisat-usb2: firmware version: 17.63 [ 58.071368] dvb-usb: found a 'Technisat SkyStar USB HD (DVB-S/S2)' in warm state. [ 58.071671] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 58.072073] DVB: registering new adapter (Technisat SkyStar USB HD (DVB-S/S2)) [ 58.073492] dvb-usb: MAC address: 00:08:c9:XX:XX:XX [ 58.211662] stv6110x_attach: Attaching STV6110x [ 58.214363] technisat-usb2: i2c-error: 60 = 7 [ 58.289865] DVB: registering adapter 1 frontend 0 (Technisat SkyStar USB HD (DVB-S/S2))... [ 58.289930] Registered IR keymap rc-technisat-usb2 [ 58.290053] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc0/input3 [ 58.290095] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc0 [ 58.290185] rc rc0: lirc_dev: driver ir-lirc-codec (technisat-usb2) registered at minor = 0 [ 58.290188] dvb-usb: schedule remote query interval to 100 msecs. [ 58.290487] dvb-usb: Technisat SkyStar USB HD (DVB-S/S2) successfully initialized and connected.
Remote Control Support
The remote is supported by the device (as can be seen in the dmesg-output above).