DVBSky T9580: Difference between revisions
Jump to navigation
Jump to search
m (→Making it Work) |
|||
(15 intermediate revisions by 3 users not shown) | |||
Line 16: | Line 16: | ||
* Bridge : [[Conexant]] PCIe A/V Decoder [[Conexant_CX23885/7/8|CX23885-15Z]] PFAC6621B 1249CN |
* Bridge : [[Conexant]] PCIe A/V Decoder [[Conexant_CX23885/7/8|CX23885-15Z]] PFAC6621B 1249CN |
||
* DVB-T2/C demodulator : [[Silicon_Labs_si2168|Si2168]]-A30 |
* DVB-T2/C demodulator : [[Silicon_Labs_si2168|Si2168]]-A30 |
||
* DVB-T2/C tuner : [[ |
* DVB-T2/C tuner : [[Silicon_Labs_Si2157|Si2158]]-A20 |
||
* DVB-S2 demodulator : Montage M88DS3103 |
* DVB-S2 demodulator : Montage M88DS3103 |
||
* DVB-S2 tuner : Montage TS2022 |
* DVB-S2 tuner : Montage TS2022 |
||
* '''Mystique SaTeCaBiX''' is more or less the same card |
|||
* PCI ID 4254:9580 (same for the Mystique card) |
* PCI ID 4254:9580 (same for the Mystique card) |
||
<br/> |
|||
* Name: T9850 Ver. 3 (there's no version 2) |
|||
* Bridge : SMI PCIe |
|||
* DVB-T2/C demodulator : [[Silicon_Labs_si2168|Si2168]]-B40 |
|||
* DVB-T2/C tuner : [[Silicon_Labs_Si2157|Si2157]]-A30 |
|||
* DVB-S2 demodulator : Montage M88DS3103 |
|||
* DVB-S2 tuner : Montage TS2022 |
|||
* PCI ID 4254:5580 |
|||
<br/><br/> |
|||
==Driver and firmware== |
==Driver and firmware== |
||
* See [[DVBSky]] wiki page. Execute build_{x86|x64}_dvbc.sh for DVB-C driver! Firmware: dvb-fe-ds3103.fw needed for this driver. |
|||
* Following firmware files are needed for version 1: dvb-demod-m88ds3103.fw, dvb-demod-si2168-a30-01.fw and dvb-tuner-si2158-a20-01.fw. |
|||
* Open source driver is being developed. |
|||
* And for version 3: dvb-demod-m88ds3103.fw, dvb-demod-si2168-b40-01.fw |
|||
** Patch for media tree has been suggested: [http://www.mail-archive.com/linux-media@vger.kernel.org/msg78182.html] |
|||
* All can be found from OpenELEC firmware tree [https://github.com/OpenELEC/dvb-firmware/tree/master/firmware]. |
|||
* As an alternative, you can get the firmware from the producer's site: http://www.dvbsky.net/Support_linux.html |
|||
* Place the firmware files under /lib/firmware |
|||
==Making it Work |
==Making it Work == |
||
The driver is included in Linux kernels since 3.18 (ver 1) and 3.19 (ver 3). For older kernels you can use the [[media_build]]. |
|||
The driver is not currently in media_tree yet, but the following steps can be followed to install the driver if you have a fairly recent kernel and necessary build tools installed. This takes a while as the whole media_tree is cloned... |
|||
dmesg output when version 1 board is detected: |
|||
<pre> |
|||
git clone git://linuxtv.org/media_build.git |
|||
cd media_build |
|||
./build --main-git |
|||
cd media |
|||
wget --no-check-certificate -O t9580.patch \ |
|||
https://patchwork.linuxtv.org/patch/25199/raw/ \ |
|||
https://patchwork.linuxtv.org/patch/25319/raw/ https://patchwork.linuxtv.org/patch/25320/raw/ \ |
|||
https://patchwork.linuxtv.org/patch/25324/raw/ https://patchwork.linuxtv.org/patch/25321/raw/ \ |
|||
https://patchwork.linuxtv.org/patch/25323/raw/ https://patchwork.linuxtv.org/patch/25322/raw/ |
|||
patch -p1 < t9580.patch |
|||
make -C ../v4l |
|||
sudo make -C .. install |
|||
</pre> |
|||
That's it. Download the firmwares mentioned in the previous chapter and place them in /lib/firmware, reboot (or reload appropriate modules) and it should work. |
|||
dmesg output: |
|||
<pre> |
<pre> |
||
Line 85: | Line 76: | ||
</pre> |
</pre> |
||
==DVBSky T9580 v3== |
|||
==Making it Work (Closed source) == |
|||
This version uses a different kernel module - smipcie. Here's the dmesg output from a 4.3 kernel: |
|||
Currently the closed source driver can be downloaded from [http://www.dvbsky.net/Support.html DVBSky website]. Driver is available for kernels 3.5-3.13. |
|||
Receival of DVB-S, DVB-S2, DVB-T, DVB-T2 and DVB-C have been confirmed working. |
|||
===Revision history=== |
|||
Cable Working for Ubuntu 12.04 |
|||
====Jan 2014==== |
|||
Upgraded Ubuntu 12.04 to kernel 3.11.1 |
|||
and used the '''media_build_bst_130806''' from dvbsky support |
|||
compiled it as in the manual . |
|||
Cable driver loaded and tested, works fine with tvheadend and XBMC. |
|||
i use oscam and smargo for encrypted channels. |
|||
more info pe63@quicknet.nl |
|||
will test it with Ubuntu 13.04 and 13.10 |
|||
Update 25jan2014 |
|||
Ubuntu 12.04 kernel 3.8.4 working<br/> |
|||
Ubuntu 12.04 kernel 3.11.1 working<br/> |
|||
Ubuntu 12.04 kernel 3.12.1 working<br/> |
|||
Ubuntu 12.04 kernel 3.13.0 not tested<br/> |
|||
Ubuntu 13.04 kernel 3.11.1 working<br/> |
|||
Ubuntu 13.04 kernel 3.12.1 working<br/> |
|||
Ubuntu 13.04 kernel 3.13.0 fails to compile<br/> |
|||
====Febr 2014==== |
|||
With newest drivers and Ubuntu 13.10 kernel - 3.13.2 it compiles good and after<br/> |
|||
sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/<br/> |
|||
sudo make install<br/> |
|||
It loads alright, i assume all lower versions will work too<br/> |
|||
for howto and downloads http://www.dvbsky.net/Support.html<br/> |
|||
<br/> |
|||
<br/> |
|||
lspci output for this card is: |
|||
05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04) |
|||
Subsystem: Device [4254:9580] |
|||
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- |
|||
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- |
|||
Latency: 0, Cache Line Size: 64 bytes |
|||
Interrupt: pin A routed to IRQ 14 |
|||
Region 0: Memory at f7800000 (64-bit, non-prefetchable) |
|||
Capabilities: [40] Express (v1) Endpoint, MSI 00 |
|||
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us |
|||
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- |
|||
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- |
|||
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ |
|||
MaxPayload 128 bytes, MaxReadReq 512 bytes |
|||
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- |
|||
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us |
|||
ClockPM- Surprise- LLActRep- BwNot- |
|||
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ |
|||
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- |
|||
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- |
|||
Capabilities: [80] Power Management version 2 |
|||
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) |
|||
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- |
|||
Capabilities: [90] Vital Product Data |
|||
Product Name: " |
|||
End |
|||
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ |
|||
Address: 0000000000000000 Data: 0000 |
|||
Capabilities: [100 v1] Advanced Error Reporting |
|||
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- |
|||
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- |
|||
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- |
|||
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- |
|||
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- |
|||
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- |
|||
Capabilities: [200 v1] Virtual Channel |
|||
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 |
|||
Arb: Fixed+ WRR32+ WRR64+ WRR128- |
|||
Ctrl: ArbSelect=WRR64 |
|||
Status: InProgress- |
|||
Port Arbitration Table [240] <?> |
|||
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- |
|||
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- |
|||
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 |
|||
Status: NegoPending- InProgress- |
|||
Kernel driver in use: cx23885 |
|||
<br/> |
|||
<br/> |
|||
dmesg output for the card (Ubuntu, kernel 3.13): |
|||
<pre> |
<pre> |
||
[220720.495204] SMI PCIe driver 0000:03:00.0: card detected: DVBSky T9580 V3 |
|||
[ 348.651632] cx2341x: Unknown symbol v4l2_ctrl_handler_init_class (err 0) |
|||
[220720.588098] DVB: registering new adapter (SMI_DVB) |
|||
[ 455.388612] cx23885 driver version 0.0.3 loaded |
|||
[220720.590320] i2c i2c-4: Added multiplexed i2c bus 6 |
|||
[ 455.388923] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSKY T9580 [card=45,autodetected] |
|||
[220720.590325] si2168 4-0064: Silicon Labs Si2168 successfully attached |
|||
[ 455.622579] cx25840 11-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) |
|||
[220720.594971] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached |
|||
[ 456.254639] cx25840 11-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) |
|||
[220720.594979] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... |
|||
[ 456.271678] cx23885_dvb_register() allocating 1 frontend(s) |
|||
[220720.601255] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:34:85:51 |
|||
[ 456.271680] cx23885[0]: cx23885 based dvb card |
|||
[220720.601321] DVB: registering new adapter (SMI_DVB) |
|||
[ 456.273690] M88DS3103 tuner read stops = 0. |
|||
[220720.610573] i2c i2c-5: Added multiplexed i2c bus 7 |
|||
[ 456.274144] DS3000 chip version: d0 attached. |
|||
[220720.692837] ts2020 7-0060: Montage Technology TS2022 successfully identified |
|||
[ 456.274961] TS202x chip version[1]: c0 attached. |
|||
[220720.692857] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88DS3103)... |
|||
[ 456.295354] TS202x chip version[2]: c3 attached. |
|||
[220720.699209] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:54:85:52 |
|||
[ 456.342806] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... |
|||
[220720.699217] Registered IR keymap rc-dvbsky |
|||
[ 456.342835] m88ds3103_load_firmware: Waiting for firmware upload(2)... |
|||
[220720.699277] input: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0/input19 |
|||
[ 457.257896] DVB: registering new adapter (cx23885[0]) |
|||
[220720.699312] rc0: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0 |
|||
[ 457.257899] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... |
|||
[220742.932523] si2168 4-0064: found a 'Silicon Labs Si2168-B40' |
|||
[ 457.286481] DVBSKY PCIe MAC= 00:17:42:54:09:82 |
|||
[220742.932569] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' |
|||
[ 457.286485] cx23885_dvb_register() allocating 1 frontend(s) |
|||
[220744.573071] si2168 4-0064: firmware version: 4.0.11 |
|||
[ 457.286498] cx23885[0]: cx23885 based dvb card |
|||
[220744.596881] si2157 6-0060: found a 'Silicon Labs Si2157-A30' |
|||
[ 457.288508] DVB: registering new adapter (cx23885[0]) |
|||
[220744.631006] si2157 6-0060: firmware version: 3.0.5 |
|||
[ 457.288516] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Sit2 DVB-T2/C)... |
|||
[ 457.318127] DVBSKY PCIe MAC= 00:18:42:54:09:83 |
|||
[ 457.318134] cx23885_dev_checkrevision() Hardware revision = 0xa5 |
|||
[ 457.318140] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf7a00000 |
|||
[ 457.341543] Registered IR keymap rc-dvbsky |
|||
[ 457.341632] input: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rc/rc0/input21 |
|||
[ 457.345268] rc0: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:1c.0/0000:02:00.0/rc/rc0 |
|||
[ 457.346954] IR NEC protocol handler initialized |
|||
[ 457.347134] IR RC5(x) protocol handler initialized |
|||
[ 457.348940] IR RC6 protocol handler initialized |
|||
[ 457.350151] IR JVC protocol handler initialized |
|||
[ 457.351072] IR Sony protocol handler initialized |
|||
[ 457.352658] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input22 |
|||
[ 457.353775] lirc_dev: IR Remote Control driver registered, major 250 |
|||
[ 457.354339] IR MCE Keyboard/mouse protocol handler initialized |
|||
[ 457.355386] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0 |
|||
[ 457.355390] IR LIRC bridge handler initialized |
|||
[ 457.355392] IR SANYO protocol handler initialized |
|||
</pre> |
</pre> |
||
Latest revision as of 08:38, 4 March 2016
A combined DVB-T/DVB-T2 or DVB-C or DVB-S/DVB-S2 PCIe card from DVBSky.
The card is identical to Mystique SaTeCaBiX.
Overview/Features
- PCI-e x1 low profile card (includes standard profile backplate)
- Single Tuner for DVB-S/DVB-S2
- Single Tuner for DVB-T/DVB-T2/DVB-C
- IR Receiver
- Remote Controller
Technical Details
- Name: T9850/5950 Ver. 1.0a 121106
- Bridge : Conexant PCIe A/V Decoder CX23885-15Z PFAC6621B 1249CN
- DVB-T2/C demodulator : Si2168-A30
- DVB-T2/C tuner : Si2158-A20
- DVB-S2 demodulator : Montage M88DS3103
- DVB-S2 tuner : Montage TS2022
- PCI ID 4254:9580 (same for the Mystique card)
- Name: T9850 Ver. 3 (there's no version 2)
- Bridge : SMI PCIe
- DVB-T2/C demodulator : Si2168-B40
- DVB-T2/C tuner : Si2157-A30
- DVB-S2 demodulator : Montage M88DS3103
- DVB-S2 tuner : Montage TS2022
- PCI ID 4254:5580
Driver and firmware
- Following firmware files are needed for version 1: dvb-demod-m88ds3103.fw, dvb-demod-si2168-a30-01.fw and dvb-tuner-si2158-a20-01.fw.
- And for version 3: dvb-demod-m88ds3103.fw, dvb-demod-si2168-b40-01.fw
- All can be found from OpenELEC firmware tree [1].
- As an alternative, you can get the firmware from the producer's site: http://www.dvbsky.net/Support_linux.html
- Place the firmware files under /lib/firmware
Making it Work
The driver is included in Linux kernels since 3.18 (ver 1) and 3.19 (ver 3). For older kernels you can use the media_build.
dmesg output when version 1 board is detected:
[39628.129977] cx23885 driver version 0.0.3 loaded [39628.130057] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSky T9580 [card=45,autodetected] [39628.358270] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [39628.991041] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [39629.006791] cx23885_dvb_register() allocating 1 frontend(s) [39629.006793] cx23885[0]: cx23885 based dvb card [39629.010119] i2c i2c-1: Added multiplexed i2c bus 12 [39629.116211] m88ts2022 12-0060: m88ts2022: Montage M88TS2022 successfully identified [39629.116217] DVB: registering new adapter (cx23885[0]) [39629.116220] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)... [39629.144175] DVBSky T9580 port 1 MAC address: 00:17:42:54:09:82 [39629.144177] cx23885_dvb_register() allocating 1 frontend(s) [39629.144178] cx23885[0]: cx23885 based dvb card [39629.145080] i2c i2c-0: Added multiplexed i2c bus 13 [39629.145083] si2168 0-0064: si2168: Silicon Labs Si2168 successfully attached [39629.147038] si2157 13-0060: si2157: Silicon Labs Si2157/Si2158 successfully attached [39629.147043] DVB: registering new adapter (cx23885[0]) [39629.147045] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [39629.174892] DVBSky T9580 port 2 MAC address: 00:18:42:54:09:83 [39629.174896] cx23885_dev_checkrevision() Hardware revision = 0xa5 [39629.174901] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf7a00000 [39646.479572] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in cold state [39646.479596] si2168 0-0064: si2168: downloading firmware from file 'dvb-demod-si2168-a30-01.fw' [39649.538399] si2168 0-0064: si2168: found a 'Silicon Labs Si2168' in warm state [39649.546988] si2157 13-0060: si2157: found a 'Silicon Labs Si2157/Si2158' in cold state [39649.547002] si2157 13-0060: si2157: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw' [39655.010407] i2c i2c-1: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw' [39655.925117] i2c i2c-1: m88ds3103: found a 'Montage M88DS3103' in warm state [39655.925120] i2c i2c-1: m88ds3103: firmware version 3.B
DVBSky T9580 v3
This version uses a different kernel module - smipcie. Here's the dmesg output from a 4.3 kernel:
[220720.495204] SMI PCIe driver 0000:03:00.0: card detected: DVBSky T9580 V3 [220720.588098] DVB: registering new adapter (SMI_DVB) [220720.590320] i2c i2c-4: Added multiplexed i2c bus 6 [220720.590325] si2168 4-0064: Silicon Labs Si2168 successfully attached [220720.594971] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [220720.594979] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [220720.601255] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:34:85:51 [220720.601321] DVB: registering new adapter (SMI_DVB) [220720.610573] i2c i2c-5: Added multiplexed i2c bus 7 [220720.692837] ts2020 7-0060: Montage Technology TS2022 successfully identified [220720.692857] SMI PCIe driver 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Montage Technology M88DS3103)... [220720.699209] SMI PCIe driver 0000:03:00.0: DVBSky SMI PCIe MAC= 00:18:33:54:85:52 [220720.699217] Registered IR keymap rc-dvbsky [220720.699277] input: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0/input19 [220720.699312] rc0: IR (DVBSky T9580 V3) as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/rc/rc0 [220742.932523] si2168 4-0064: found a 'Silicon Labs Si2168-B40' [220742.932569] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [220744.573071] si2168 4-0064: firmware version: 4.0.11 [220744.596881] si2157 6-0060: found a 'Silicon Labs Si2157-A30' [220744.631006] si2157 6-0060: firmware version: 3.0.5