NotOnlyTV LV3H: Difference between revisions
Jump to navigation
Jump to search
m (→Images: remote added) |
|||
| (9 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[image:Lv3h-board_top.jpg|right|thumb|200px|Top view of LV3H]] |
[[image:Lv3h-board_top.jpg|right|thumb|200px|Top view of LV3H]] |
||
Brief specification. |
|||
The card consist of: |
The card consist of: |
||
| Line 10: | Line 8: | ||
'''Subsystem ID''': 14f1:8852 |
'''Subsystem ID''': 14f1:8852 |
||
Supported via insmod option: '''options cx88xx card=91''' |
|||
NotOnlyTV provide in their website a driver for Fedora Linux. This driver (v4l-dvb-experimental-x8000mt.tar.gz) is for the Geniatech X8000-MT DVB-T [http://www.geniatech.com/pa/x8000t.asp]. Unfortunatelly this doesn't seem to work. And in recent kernels the LV3H is detected as Geniatech X8000-MT, but it doesn't work as this model. |
|||
Windows drivers: [https://mega.nz/#!SxQRBILD!Y8OPOFt8jn-VQnErMSnZfssPjT_B4yPaDKufeQIKkTk NotOnlyTV_LV3H-drivers_CD.rar] |
Windows drivers: [https://mega.nz/#!SxQRBILD!Y8OPOFt8jn-VQnErMSnZfssPjT_B4yPaDKufeQIKkTk NotOnlyTV_LV3H-drivers_CD.rar] |
||
=== Images === |
=== Images === |
||
{|border=0 valign="top" |
{|border=0 valign="top" |
||
|[[Image:Lv3h-board_top.jpg|thumb|120px|board top]] |
|[[Image:Lv3h-board_top.jpg|thumb|120px|board top]] |
||
|[[Image:Lv3h-tuner.jpg|thumb|120px|tuner detail]] |
|[[Image:Lv3h-tuner.jpg|thumb|120px|tuner detail]] |
||
|[[Image:Lv3h-ir_controller.jpg|thumb|110px|IR controller]] |
|||
|[[Image:Lv3h-connectors.jpg|thumb|120px|connectors]] |
|[[Image:Lv3h-connectors.jpg|thumb|120px|connectors]] |
||
|[[Image:Lv3h-av_cable.jpg|thumb|120px|AV cable]] |
|[[Image:Lv3h-av_cable.jpg|thumb|120px|AV cable]] |
||
|[[Image:Lv3h-av_cable_pinout.jpg|thumb|120px|AV cable pinout]] |
|||
|[[Image:Lv3h-remote.jpg|thumb|0x100px|remote]] |
|[[Image:Lv3h-remote.jpg|thumb|0x100px|remote]] |
||
|} |
|} |
||
== PCIe compatibility == |
|||
This DVB card was tested succesfully using a PCI-Express to PCI riser bus adapter. It allows to use the DVB card on modern motherboards without the old PCI ports. |
|||
[[File:ASM1083-pcie_pci_bridge.jpg|border|caption|200px]] |
|||
lspci |
|||
06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04) |
|||
This adapter can be found on the Aliexpress market at a reasonable price (about 8€) |
|||
== Making it work with latest kernels == |
== Making it work with latest kernels == |
||
| Line 67: | Line 77: | ||
== IR remote == |
== IR remote == |
||
Supported since kernel 6.1 ([https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=39dfd52d0f481de42a4 media: cx88: add IR remote support for NotOnlyTV LV3H]). The receiver uses the RC5 protocol and only remotes compatibles with OEM one will work<br> |
|||
Not working |
|||
Test the remote with ir-keytable: |
|||
<pre># ir-keytable -t |
|||
Testing events. Please, press CTRL-C to abort. |
|||
1221.832806: lirc protocol(rc5): scancode = 0x1 |
|||
1221.832825: event type EV_MSC(0x04): scancode = 0x01 |
|||
1221.832825: event type EV_KEY(0x01) key_down: KEY_NUMERIC_1(0x0201) |
|||
1221.832825: event type EV_SYN(0x00). |
|||
1222.098709: event type EV_KEY(0x01) key_up: KEY_NUMERIC_1(0x0201) |
|||
1222.098709: event type EV_SYN(0x00). |
|||
1223.079512: lirc protocol(rc5): scancode = 0x2 toggle=1 |
|||
1223.079533: event type EV_MSC(0x04): scancode = 0x02 |
|||
1223.079533: event type EV_KEY(0x01) key_down: KEY_NUMERIC_2(0x0202) |
|||
1223.079533: event type EV_SYN(0x00). |
|||
1223.348710: event type EV_KEY(0x01) key_up: KEY_NUMERIC_2(0x0202) |
|||
1223.348710: event type EV_SYN(0x00). |
|||
1224.152923: lirc protocol(rc5): scancode = 0x3 |
|||
1224.152934: event type EV_MSC(0x04): scancode = 0x03 |
|||
1224.152934: event type EV_KEY(0x01) key_down: KEY_NUMERIC_3(0x0203) |
|||
1224.152934: event type EV_SYN(0x00). |
|||
1224.418696: event type EV_KEY(0x01) key_up: KEY_NUMERIC_3(0x0203) |
|||
1224.418696: event type EV_SYN(0x00). |
|||
1225.716157: lirc protocol(rc5): scancode = 0x4 toggle=1 |
|||
1225.716174: event type EV_MSC(0x04): scancode = 0x04 |
|||
1225.716174: event type EV_KEY(0x01) key_down: KEY_NUMERIC_4(0x0204) |
|||
1225.716174: event type EV_SYN(0x00). |
|||
1225.962040: event type EV_KEY(0x01) key_up: KEY_NUMERIC_4(0x0204) |
|||
1225.962040: event type EV_SYN(0x00). |
|||
</pre> |
|||
Test the remote with evtest: |
|||
<pre># evtest |
|||
No device specified, trying to scan all of /dev/input/event* |
|||
Available devices: |
|||
/dev/input/event0: Power Button |
|||
/dev/input/event1: Power Button |
|||
/dev/input/event10: HDA Intel Line Out Side |
|||
/dev/input/event11: Geniatech |
|||
/dev/input/event12: Serial IR type home-brew |
|||
/dev/input/event2: Logitech USB-PS/2 Optical Mouse |
|||
/dev/input/event3: AT Translated Set 2 keyboard |
|||
/dev/input/event4: PC Speaker |
|||
/dev/input/event5: HDA Intel Rear Mic |
|||
/dev/input/event6: HDA Intel Line |
|||
/dev/input/event7: HDA Intel Line Out Front |
|||
/dev/input/event8: HDA Intel Line Out Surround |
|||
/dev/input/event9: HDA Intel Line Out CLFE |
|||
Select the device event number [0-12]: 11 |
|||
Input driver version is 1.0.1 |
|||
Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0 |
|||
Input device name: "Geniatech" |
|||
Supported events: |
|||
Event type 0 (EV_SYN) |
|||
Event type 1 (EV_KEY) |
|||
Event code 1 (KEY_ESC) |
|||
Event code 103 (KEY_UP) |
|||
Event code 105 (KEY_LEFT) |
|||
Event code 106 (KEY_RIGHT) |
|||
Event code 108 (KEY_DOWN) |
|||
Event code 113 (KEY_MUTE) |
|||
Event code 114 (KEY_VOLUMEDOWN) |
|||
Event code 115 (KEY_VOLUMEUP) |
|||
Event code 116 (KEY_POWER) |
|||
Event code 119 (KEY_PAUSE) |
|||
Event code 128 (KEY_STOP) |
|||
Event code 167 (KEY_RECORD) |
|||
Event code 168 (KEY_REWIND) |
|||
Event code 207 (KEY_PLAY) |
|||
Event code 208 (KEY_FASTFORWARD) |
|||
Event code 212 (KEY_CAMERA) |
|||
Event code 352 (KEY_OK) |
|||
Event code 356 (KEY_POWER2) |
|||
Event code 359 (KEY_TIME) |
|||
Event code 363 (KEY_CHANNEL) |
|||
Event code 372 (KEY_ZOOM) |
|||
Event code 393 (KEY_VIDEO) |
|||
Event code 402 (KEY_CHANNELUP) |
|||
Event code 403 (KEY_CHANNELDOWN) |
|||
Event code 410 (KEY_SHUFFLE) |
|||
Event code 512 (KEY_NUMERIC_0) |
|||
Event code 513 (KEY_NUMERIC_1) |
|||
Event code 514 (KEY_NUMERIC_2) |
|||
Event code 515 (KEY_NUMERIC_3) |
|||
Event code 516 (KEY_NUMERIC_4) |
|||
Event code 517 (KEY_NUMERIC_5) |
|||
Event code 518 (KEY_NUMERIC_6) |
|||
Event code 519 (KEY_NUMERIC_7) |
|||
Event code 520 (KEY_NUMERIC_8) |
|||
Event code 521 (KEY_NUMERIC_9) |
|||
Event type 2 (EV_REL) |
|||
Event code 0 (REL_X) |
|||
Event code 1 (REL_Y) |
|||
Event type 4 (EV_MSC) |
|||
Event code 4 (MSC_SCAN) |
|||
Key repeat handling: |
|||
Repeat type 20 (EV_REP) |
|||
Repeat code 0 (REP_DELAY) |
|||
Value 500 |
|||
Repeat code 1 (REP_PERIOD) |
|||
Value 125 |
|||
Properties: |
|||
Property type 5 (INPUT_PROP_POINTING_STICK) |
|||
Testing ... (interrupt to exit) |
|||
Event: time 1672942930.274074, type 4 (EV_MSC), code 4 (MSC_SCAN), value 01 |
|||
Event: time 1672942930.274074, type 1 (EV_KEY), code 513 (KEY_NUMERIC_1), value 1 |
|||
Event: time 1672942930.274074, -------------- SYN_REPORT ------------ |
|||
Event: time 1672942930.543225, type 1 (EV_KEY), code 513 (KEY_NUMERIC_1), value 0 |
|||
Event: time 1672942930.543225, -------------- SYN_REPORT ------------ |
|||
Event: time 1672942932.040677, type 4 (EV_MSC), code 4 (MSC_SCAN), value 02 |
|||
Event: time 1672942932.040677, type 1 (EV_KEY), code 514 (KEY_NUMERIC_2), value 1 |
|||
Event: time 1672942932.040677, -------------- SYN_REPORT ------------ |
|||
Event: time 1672942932.303216, type 1 (EV_KEY), code 514 (KEY_NUMERIC_2), value 0 |
|||
Event: time 1672942932.303216, -------------- SYN_REPORT ------------ |
|||
Event: time 1672942933.107346, type 4 (EV_MSC), code 4 (MSC_SCAN), value 03 |
|||
Event: time 1672942933.107346, type 1 (EV_KEY), code 515 (KEY_NUMERIC_3), value 1 |
|||
Event: time 1672942933.107346, -------------- SYN_REPORT ------------ |
|||
Event: time 1672942933.369891, type 1 (EV_KEY), code 515 (KEY_NUMERIC_3), value 0 |
|||
Event: time 1672942933.369891, -------------- SYN_REPORT ------------ |
|||
</pre> |
|||
The IR sensor is connected through an unknown chip (no visible part number) to the i2c bus: |
|||
(see also [[Geniatech_DVB-S_Digistar#Remote_Control_Support|Geniatech DVB-S remote control support]]) |
|||
<pre># modprobe i2c-dev |
|||
# i2cdetect -l |
|||
i2c-0 i2c i915 gmbus ssc I2C adapter |
|||
i2c-1 i2c i915 gmbus vga I2C adapter |
|||
i2c-2 i2c i915 gmbus panel I2C adapter |
|||
i2c-3 i2c i915 gmbus dpc I2C adapter |
|||
i2c-4 i2c i915 gmbus dpb I2C adapter |
|||
i2c-5 i2c i915 gmbus dpd I2C adapter |
|||
i2c-6 i2c cx88[0] I2C adapter |
|||
# i2cdetect -y 6 |
|||
0 1 2 3 4 5 6 7 8 9 a b c d e f |
|||
00: -- -- -- -- -- -- -- 0f |
|||
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |
|||
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |
|||
30: -- -- -- 33 -- -- -- -- -- -- -- -- -- -- -- -- |
|||
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- |
|||
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- -- |
|||
60: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- |
|||
70: -- -- -- -- -- -- -- --</pre> |
|||
The ir sensor is at i2c address 0x33: |
|||
<pre># i2cdump -y 6 0x33 b |
|||
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef |
|||
00: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
10: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
20: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
30: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
40: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
50: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
60: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
70: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
80: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
90: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
a0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
b0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
c0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
d0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
e0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ???????????????? |
|||
f0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????</pre> |
|||
if we press any key at the remote, this output changes: |
|||
<pre># i2cdump -y 6 0x33 b |
|||
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef |
|||
00: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
10: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
20: 85 85 85 XX XX XX XX XX XX XX XX XX XX XX XX XX ???XXXXXXXXXXXXX |
|||
30: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
40: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
50: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
60: 85 85 85 85 85 85 85 85 85 85 85 XX XX 85 XX XX ???????????XX?XX |
|||
70: 85 XX XX XX XX XX XX XX XX 85 85 85 85 85 85 85 ?XXXXXXXX??????? |
|||
80: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
90: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
a0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
b0: 85 85 XX XX XX XX XX XX XX XX XX XX XX XX XX 85 ??XXXXXXXXXXXXX? |
|||
c0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
d0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
e0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
f0: 85 85 85 85 85 85 85 85 85 85 XX XX XX XX XX XX ??????????XXXXXX</pre> |
|||
if we release the key: |
|||
<pre># i2cdump -y 6 0x33 b |
|||
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef |
|||
00: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
10: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
20: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
30: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
40: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
50: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
60: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
70: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
80: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
90: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
a0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
b0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
c0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
d0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
e0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ???????????????? |
|||
f0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????</pre> |
|||
IR remote codes for lircd:<pre> |
|||
# Please make this file available to others |
|||
# by sending it to <lirc@bartelmus.de> |
|||
# |
|||
# this config file was automatically generated |
|||
# using lirc-0.9.0(default) on Sat Jan 14 14:26:39 2012 |
|||
# |
|||
# contributed by danitool |
|||
# |
|||
# brand: notonlytv |
|||
# model no. of remote control: lv3h |
|||
# devices being controlled by this remote: hybrid pci LV3H |
|||
# |
|||
begin remote |
|||
name not_lv3h |
|||
bits 13 |
|||
flags RC5|CONST_LENGTH |
|||
eps 30 |
|||
aeps 100 |
|||
one 869 819 |
|||
zero 869 819 |
|||
plead 873 |
|||
gap 108077 |
|||
toggle_bit_mask 0x800 |
|||
begin codes |
|||
KEY_TV 0x1038 |
|||
0/0 0x100C |
|||
KEY_1 0x1001 |
|||
KEY_2 0x1002 |
|||
KEY_3 0x1003 |
|||
KEY_4 0x1004 |
|||
KEY_5 0x1005 |
|||
KEY_6 0x1006 |
|||
KEY_7 0x1007 |
|||
KEY_8 0x1008 |
|||
KEY_9 0x1009 |
|||
KEY_0 0x1000 |
|||
KEY_MUTE 0x100A |
|||
KEY_ESC 0x1029 |
|||
KEY_CHANNELUP 0x1012 |
|||
KEY_CHANNELDOWN 0x1013 |
|||
KEY_VOLUMEUP 0x102B |
|||
KEY_VOLUMEDOWN 0x102C |
|||
KEY_OK 0x100D |
|||
KEY_UP 0x1020 |
|||
KEY_DOWN 0x1021 |
|||
KEY_LEFT 0x1011 |
|||
KEY_RIGHT 0x1010 |
|||
KEY_RECORD 0x101F |
|||
KEY_PLAY 0x1017 |
|||
KEY_PAUSE 0x1016 |
|||
KEY_STOP 0x100B |
|||
KEY_FORWARD 0x1027 |
|||
KEY_REWIND 0x1026 |
|||
timeshift 0x101E |
|||
snapshot 0x100E |
|||
KEY_SCREEN 0x102D |
|||
-/0 0x100F |
|||
KEY_SHUFFLE 0x1014 |
|||
KEY_POWER 0x1025 |
|||
end codes |
|||
end remote |
|||
</pre> |
|||
== Errors == |
== Errors == |
||
Latest revision as of 18:04, 14 October 2024
The card consist of:
- A/V Controller: Conexant CX-23883
- Tuner: Xceive XC3028L
- DVB-T Decoder: Intel CE6353 (WJCE 6353) AKA Zarlink ZL10353
Subsystem ID: 14f1:8852
Supported via insmod option: options cx88xx card=91
Windows drivers: NotOnlyTV_LV3H-drivers_CD.rar
Images
PCIe compatibility
This DVB card was tested succesfully using a PCI-Express to PCI riser bus adapter. It allows to use the DVB card on modern motherboards without the old PCI ports.
lspci 06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
This adapter can be found on the Aliexpress market at a reasonable price (about 8€)
Making it work with latest kernels
Officialy supported since kernel 5.5 (media: cx88: Add support for NotOnlyTV LV3H card).
The card autodectection isn't still implemented, because the PCI subsystem ID is the same as the Geniatech X8000-MT. Follow these instructions to make it work:
- Install the firmware for the tuner (xc3028L-v36.fw):
wget http://steventoth.net/linux/hvr1400/xc3028L-v36.fw mv xc3028L-v36.fw /lib/firmware/
kernel ≥ 5.5
- Create a new file in /etc/modprobe.d/:
nano /etc/modprobe.d/LV3H.conf
And add the lines:
options cx88xx card=91 options dvb_core dvb_shutdown_timeout=5
If we're only going to use DVB-T, then we can also blacklist the analog modules:
blacklist cx8800 blacklist cx88-alsa
save it, reboot.
kernel ≥ 2.6.32
- Create a new file in /etc/modprobe.d/:
nano /etc/modprobe.d/LV3H.conf
And add the lines:
options cx88xx card=81 tuner=71 options tuner_xc2028 firmware_name=xc3028L-v36.fw no_poweroff=1 options dvb_core dvb_shutdown_timeout=5
If we're only going to use DVB-T, then we can also blacklist the analog modules:
blacklist cx8800 blacklist cx88-alsa
save it, reboot.
Digital TV
Tested and working OK with Kaffeine
Analog
- FM radio. Be sure you plugged the FM antenna. Command example with mplayer (the audio output is also redirected to the main audio card):
mplayer -rawaudio rate=48000 radio://0/capture -radio adevice=hw=0:channels=94.6-Radio3
Command example with fmtools, only audio output from the capture card (green minijack female connector):
fm -d /dev/radio0 94.6 65535
- Video composite (yellow, white and red cables):
Tested with VLC, select INPUT 1, and PAL B/G
IR remote
Supported since kernel 6.1 (media: cx88: add IR remote support for NotOnlyTV LV3H). The receiver uses the RC5 protocol and only remotes compatibles with OEM one will work
Test the remote with ir-keytable:
# ir-keytable -t Testing events. Please, press CTRL-C to abort. 1221.832806: lirc protocol(rc5): scancode = 0x1 1221.832825: event type EV_MSC(0x04): scancode = 0x01 1221.832825: event type EV_KEY(0x01) key_down: KEY_NUMERIC_1(0x0201) 1221.832825: event type EV_SYN(0x00). 1222.098709: event type EV_KEY(0x01) key_up: KEY_NUMERIC_1(0x0201) 1222.098709: event type EV_SYN(0x00). 1223.079512: lirc protocol(rc5): scancode = 0x2 toggle=1 1223.079533: event type EV_MSC(0x04): scancode = 0x02 1223.079533: event type EV_KEY(0x01) key_down: KEY_NUMERIC_2(0x0202) 1223.079533: event type EV_SYN(0x00). 1223.348710: event type EV_KEY(0x01) key_up: KEY_NUMERIC_2(0x0202) 1223.348710: event type EV_SYN(0x00). 1224.152923: lirc protocol(rc5): scancode = 0x3 1224.152934: event type EV_MSC(0x04): scancode = 0x03 1224.152934: event type EV_KEY(0x01) key_down: KEY_NUMERIC_3(0x0203) 1224.152934: event type EV_SYN(0x00). 1224.418696: event type EV_KEY(0x01) key_up: KEY_NUMERIC_3(0x0203) 1224.418696: event type EV_SYN(0x00). 1225.716157: lirc protocol(rc5): scancode = 0x4 toggle=1 1225.716174: event type EV_MSC(0x04): scancode = 0x04 1225.716174: event type EV_KEY(0x01) key_down: KEY_NUMERIC_4(0x0204) 1225.716174: event type EV_SYN(0x00). 1225.962040: event type EV_KEY(0x01) key_up: KEY_NUMERIC_4(0x0204) 1225.962040: event type EV_SYN(0x00).
Test the remote with evtest:
# evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
/dev/input/event10: HDA Intel Line Out Side
/dev/input/event11: Geniatech
/dev/input/event12: Serial IR type home-brew
/dev/input/event2: Logitech USB-PS/2 Optical Mouse
/dev/input/event3: AT Translated Set 2 keyboard
/dev/input/event4: PC Speaker
/dev/input/event5: HDA Intel Rear Mic
/dev/input/event6: HDA Intel Line
/dev/input/event7: HDA Intel Line Out Front
/dev/input/event8: HDA Intel Line Out Surround
/dev/input/event9: HDA Intel Line Out CLFE
Select the device event number [0-12]: 11
Input driver version is 1.0.1
Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0
Input device name: "Geniatech"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 1 (KEY_ESC)
Event code 103 (KEY_UP)
Event code 105 (KEY_LEFT)
Event code 106 (KEY_RIGHT)
Event code 108 (KEY_DOWN)
Event code 113 (KEY_MUTE)
Event code 114 (KEY_VOLUMEDOWN)
Event code 115 (KEY_VOLUMEUP)
Event code 116 (KEY_POWER)
Event code 119 (KEY_PAUSE)
Event code 128 (KEY_STOP)
Event code 167 (KEY_RECORD)
Event code 168 (KEY_REWIND)
Event code 207 (KEY_PLAY)
Event code 208 (KEY_FASTFORWARD)
Event code 212 (KEY_CAMERA)
Event code 352 (KEY_OK)
Event code 356 (KEY_POWER2)
Event code 359 (KEY_TIME)
Event code 363 (KEY_CHANNEL)
Event code 372 (KEY_ZOOM)
Event code 393 (KEY_VIDEO)
Event code 402 (KEY_CHANNELUP)
Event code 403 (KEY_CHANNELDOWN)
Event code 410 (KEY_SHUFFLE)
Event code 512 (KEY_NUMERIC_0)
Event code 513 (KEY_NUMERIC_1)
Event code 514 (KEY_NUMERIC_2)
Event code 515 (KEY_NUMERIC_3)
Event code 516 (KEY_NUMERIC_4)
Event code 517 (KEY_NUMERIC_5)
Event code 518 (KEY_NUMERIC_6)
Event code 519 (KEY_NUMERIC_7)
Event code 520 (KEY_NUMERIC_8)
Event code 521 (KEY_NUMERIC_9)
Event type 2 (EV_REL)
Event code 0 (REL_X)
Event code 1 (REL_Y)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 500
Repeat code 1 (REP_PERIOD)
Value 125
Properties:
Property type 5 (INPUT_PROP_POINTING_STICK)
Testing ... (interrupt to exit)
Event: time 1672942930.274074, type 4 (EV_MSC), code 4 (MSC_SCAN), value 01
Event: time 1672942930.274074, type 1 (EV_KEY), code 513 (KEY_NUMERIC_1), value 1
Event: time 1672942930.274074, -------------- SYN_REPORT ------------
Event: time 1672942930.543225, type 1 (EV_KEY), code 513 (KEY_NUMERIC_1), value 0
Event: time 1672942930.543225, -------------- SYN_REPORT ------------
Event: time 1672942932.040677, type 4 (EV_MSC), code 4 (MSC_SCAN), value 02
Event: time 1672942932.040677, type 1 (EV_KEY), code 514 (KEY_NUMERIC_2), value 1
Event: time 1672942932.040677, -------------- SYN_REPORT ------------
Event: time 1672942932.303216, type 1 (EV_KEY), code 514 (KEY_NUMERIC_2), value 0
Event: time 1672942932.303216, -------------- SYN_REPORT ------------
Event: time 1672942933.107346, type 4 (EV_MSC), code 4 (MSC_SCAN), value 03
Event: time 1672942933.107346, type 1 (EV_KEY), code 515 (KEY_NUMERIC_3), value 1
Event: time 1672942933.107346, -------------- SYN_REPORT ------------
Event: time 1672942933.369891, type 1 (EV_KEY), code 515 (KEY_NUMERIC_3), value 0
Event: time 1672942933.369891, -------------- SYN_REPORT ------------
The IR sensor is connected through an unknown chip (no visible part number) to the i2c bus: (see also Geniatech DVB-S remote control support)
# modprobe i2c-dev
# i2cdetect -l
i2c-0 i2c i915 gmbus ssc I2C adapter
i2c-1 i2c i915 gmbus vga I2C adapter
i2c-2 i2c i915 gmbus panel I2C adapter
i2c-3 i2c i915 gmbus dpc I2C adapter
i2c-4 i2c i915 gmbus dpb I2C adapter
i2c-5 i2c i915 gmbus dpd I2C adapter
i2c-6 i2c cx88[0] I2C adapter
# i2cdetect -y 6
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- 0f
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- 33 -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
60: -- UU -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
The ir sensor is at i2c address 0x33:
# i2cdump -y 6 0x33 b
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
10: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
20: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
30: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
40: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
50: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
60: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
70: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
80: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
90: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
a0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
b0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
c0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
d0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
e0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
f0: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 ????????????????
if we press any key at the remote, this output changes:
# i2cdump -y 6 0x33 b
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
10: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
20: 85 85 85 XX XX XX XX XX XX XX XX XX XX XX XX XX ???XXXXXXXXXXXXX
30: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
40: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
50: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
60: 85 85 85 85 85 85 85 85 85 85 85 XX XX 85 XX XX ???????????XX?XX
70: 85 XX XX XX XX XX XX XX XX 85 85 85 85 85 85 85 ?XXXXXXXX???????
80: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
90: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
a0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
b0: 85 85 XX XX XX XX XX XX XX XX XX XX XX XX XX 85 ??XXXXXXXXXXXXX?
c0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
d0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
e0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
f0: 85 85 85 85 85 85 85 85 85 85 XX XX XX XX XX XX ??????????XXXXXX
if we release the key:
# i2cdump -y 6 0x33 b
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
10: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
20: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
30: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
40: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
50: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
60: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
70: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
80: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
90: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
a0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
b0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
c0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
d0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
e0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????
f0: 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 ????????????????IR remote codes for lircd:
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.9.0(default) on Sat Jan 14 14:26:39 2012
#
# contributed by danitool
#
# brand: notonlytv
# model no. of remote control: lv3h
# devices being controlled by this remote: hybrid pci LV3H
#
begin remote
name not_lv3h
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 869 819
zero 869 819
plead 873
gap 108077
toggle_bit_mask 0x800
begin codes
KEY_TV 0x1038
0/0 0x100C
KEY_1 0x1001
KEY_2 0x1002
KEY_3 0x1003
KEY_4 0x1004
KEY_5 0x1005
KEY_6 0x1006
KEY_7 0x1007
KEY_8 0x1008
KEY_9 0x1009
KEY_0 0x1000
KEY_MUTE 0x100A
KEY_ESC 0x1029
KEY_CHANNELUP 0x1012
KEY_CHANNELDOWN 0x1013
KEY_VOLUMEUP 0x102B
KEY_VOLUMEDOWN 0x102C
KEY_OK 0x100D
KEY_UP 0x1020
KEY_DOWN 0x1021
KEY_LEFT 0x1011
KEY_RIGHT 0x1010
KEY_RECORD 0x101F
KEY_PLAY 0x1017
KEY_PAUSE 0x1016
KEY_STOP 0x100B
KEY_FORWARD 0x1027
KEY_REWIND 0x1026
timeshift 0x101E
snapshot 0x100E
KEY_SCREEN 0x102D
-/0 0x100F
KEY_SHUFFLE 0x1014
KEY_POWER 0x1025
end codes
end remote
Errors
Sometimes the firmware fails to load
[ 4009.583858] cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?* [ 4009.583864] cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000 [ 4009.821382] xc2028 6-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 4013.134460] xc2028 6-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [ 4013.181343] xc2028 6-0061: Loading SCODE for type=DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4560 (62000300), id 0000000000000000. [ 4013.193427] xc2028 6-0061: Incorrect readback of firmware version. [ 4013.447484] xc2028 6-0061: Error! firmware not loaded [ 4013.447491] xc2028 6-0061: Error -22 while loading base firmware [ 4013.704136] xc2028 6-0061: Error! firmware not loaded [ 4013.704139] xc2028 6-0061: Error -22 while loading base firmware [ 4013.960808] xc2028 6-0061: Error! firmware not loaded [ 4013.960813] xc2028 6-0061: Error -22 while loading base firmware [ 4014.217499] xc2028 6-0061: Error! firmware not loaded [ 4014.217503] xc2028 6-0061: Error -22 while loading base firmware [ 4014.474142] xc2028 6-0061: Error! firmware not loaded [ 4014.474149] xc2028 6-0061: Error -22 while loading base firmware [ 4014.730791] xc2028 6-0061: Error! firmware not loaded [ 4014.730793] xc2028 6-0061: Error -22 while loading base firmware [ 4014.987468] xc2028 6-0061: Error! firmware not loaded [ 4014.987473] xc2028 6-0061: Error -22 while loading base firmware [ 4015.244119] xc2028 6-0061: Error! firmware not loaded [ 4015.244121] xc2028 6-0061: Error -22 while loading base firmware
- After this error, in recent kernels (Linux 4.9, 5.07), the only way to recover again the card is reloading the DVB modules:
rmmod cx88_dvb ; rmmod videobuf2_dvb ; rmmod dvb-core ; modprobe cx88_dvb
The XC3028 firmware 2.4 version has less failures when loading it, but it often responds with a "i2c NAK bailout" and the the DVB tunning is worse.
EEPROM
For the official support we may need to know the contents of the EEPROM. As pointed by the main developer, probably there are different versions of the board, see https://patchwork.kernel.org/patch/2332631/
# modprobe i2c-dev
# i2cdetect -l
i2c-3 i2c i915 gmbus dpc I2C adapter
i2c-1 i2c i915 gmbus vga I2C adapter
i2c-6 i2c cx88[0] I2C adapter
i2c-4 i2c i915 gmbus dpb I2C adapter
i2c-2 i2c i915 gmbus panel I2C adapter
i2c-0 i2c i915 gmbus ssc I2C adapter
i2c-5 i2c i915 gmbus dpd I2C adapter
# i2cdump 6 0x50
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 07 ff ff ff f1 14 52 88 04 04 32 55 f8 00 a2 02 ?...??R???2U?.??
10: a1 00 40 63 06 11 44 30 03 df 40 80 00 20 00 73 ?.@c??D0??@?. .s
20: 3c 10 00 00 00 00 ff ff ff ff ff ff ff ff ff ff <?..............
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0 00 ..............?.
Regspy
- DVB-T tuned and working
CX2388x Card [0]: Vendor ID: 0x14f1 Device ID: 0x8800 Subsystem ID: 0x885214f1 ================================================================================= CX2388x Card - Register Dump: CX2388X_DEVICE_STATUS: 0000031c (00000000 00000000 00000011 00011100) CX2388X_VIDEO_INPUT: 00000784 (00000000 00000000 00000111 10000100) CX2388X_TEMPORAL_DEC: 00000000 (00000000 00000000 00000000 00000000) CX2388X_AGC_BURST_DELAY: 00008888 (00000000 00000000 10001000 10001000) CX2388X_BRIGHT_CONTRAST: 00003900 (00000000 00000000 00111001 00000000) CX2388X_UVSATURATION: 00005a7f (00000000 00000000 01011010 01111111) CX2388X_HUE: 00000000 (00000000 00000000 00000000 00000000) CX2388X_WHITE_CRUSH: 00003fcf (00000000 00000000 00111111 11001111) CX2388X_PIXEL_CNT_NOTCH: 0000046f (00000000 00000000 00000100 01101111) CX2388X_HORZ_DELAY_EVEN: 00000046 (00000000 00000000 00000000 01000110) CX2388X_HORZ_DELAY_ODD: 00000046 (00000000 00000000 00000000 01000110) CX2388X_VERT_DELAY_EVEN: 00000022 (00000000 00000000 00000000 00100010) CX2388X_VERT_DELAY_ODD: 00000022 (00000000 00000000 00000000 00100010) CX2388X_VDELAYCCIR_EVEN: 0000000c (00000000 00000000 00000000 00001100) CX2388X_VDELAYCCIR_ODD: 0000000e (00000000 00000000 00000000 00001110) CX2388X_HACTIVE_EVEN: 00000140 (00000000 00000000 00000001 01000000) CX2388X_HACTIVE_ODD: 00000140 (00000000 00000000 00000001 01000000) CX2388X_VACTIVE_EVEN: 00000240 (00000000 00000000 00000010 01000000) CX2388X_VACTIVE_ODD: 00000240 (00000000 00000000 00000010 01000000) CX2388X_HSCALE_EVEN: 00001ce6 (00000000 00000000 00011100 11100110) CX2388X_HSCALE_ODD: 00001ce6 (00000000 00000000 00011100 11100110) CX2388X_VSCALE_EVEN: 00001f9a (00000000 00000000 00011111 10011010) CX2388X_VSCALE_ODD: 00001f9a (00000000 00000000 00011111 10011010) CX2388X_FILTER_EVEN: 00000120 (00000000 00000000 00000001 00100000) CX2388X_FILTER_ODD: 00000120 (00000000 00000000 00000001 00100000) CX2388X_FORMAT_2HCOMB: 002f0100 (00000000 00101111 00000001 00000000) CX2388X_PLL: 013d14c9 (00000001 00111101 00010100 11001001) CX2388X_PLL_ADJUST: 03f9f190 (00000011 11111001 11110001 10010000) CX2388X_SAMPLERATECONV: 00019d5f (00000000 00000001 10011101 01011111) CX2388X_SAMPLERATEFIFO: 003f8008 (00000000 00111111 10000000 00001000) CX2388X_SUBCARRIERSTEP: 00400000 (00000000 01000000 00000000 00000000) CX2388X_SUBCARRIERSTEPDR: 00538e38 (00000000 01010011 10001110 00111000) CX2388X_CAPTURECONTROL: 00000000 (00000000 00000000 00000000 00000000) CX2388X_VIDEO_COLOR_FORMAT: 00009000 (00000000 00000000 10010000 00000000) CX2388X_VBI_SIZE: 00010000 (00000000 00000001 00000000 00000000) CX2388X_FIELD_CAP_CNT: 00000000 (00000000 00000000 00000000 00000000) CX2388X_VIP_CONFIG: 00000000 (00000000 00000000 00000000 00000000) CX2388X_VIP_CONTBRGT: 00007a00 (00000000 00000000 01111010 00000000) CX2388X_VIP_HSCALE: 00001233 (00000000 00000000 00010010 00110011) CX2388X_VIP_VSCALE: 00001f9a (00000000 00000000 00011111 10011010) CX2388X_VBOS: 00040a00 (00000000 00000100 00001010 00000000) CX2388X_PINMUX_IO: 00000000 (00000000 00000000 00000000 00000000) MO_GP0_IO: 000000ff (00000000 00000000 00000000 11111111) MO_GP1_IO: 0000f39e (00000000 00000000 11110011 10011110) MO_GP2_IO: 00000001 (00000000 00000000 00000000 00000001) MO_GP3_IO: 00000000 (00000000 00000000 00000000 00000000) MO_GPIO: 00000000 (00000000 00000000 00000000 00000000) MO_GPOE: 00000000 (00000000 00000000 00000000 00000000) MO_AUD_XFR_STAT: 00000000 (00000000 00000000 00000000 00000000) MO_AUDD_LNGTH: 000001e0 (00000000 00000000 00000001 11100000) MO_AUDR_LNGTH: 00000800 (00000000 00000000 00001000 00000000) CX2388X_DEV_CNTRL2: 00000000 (00000000 00000000 00000000 00000000) MO_VID_DMACNTRL: 00000000 (00000000 00000000 00000000 00000000) MO_AUD_DMACNTRL: 00000007 (00000000 00000000 00000000 00000111) MO_TS_DMACNTRL: 00000000 (00000000 00000000 00000000 00000000) MO_VIP_DMACNTRL: 00000000 (00000000 00000000 00000000 00000000) MO_GPHST_DMACNTRL: 00000000 (00000000 00000000 00000000 00000000) CX2388X_PCI_INTMSK: 00000007 (00000000 00000000 00000000 00000111) CX2388X_VID_INTMSK: 00000000 (00000000 00000000 00000000 00000000) CX2388X_AUD_INTMSK: 00000000 (00000000 00000000 00000000 00000000) CX2388X_TS_INTMSK: 00000000 (00000000 00000000 00000000 00000000) CX2388X_VIP_INTMSK: 00000000 (00000000 00000000 00000000 00000000) CX2388X_GPHST_INTMSK: 00000000 (00000000 00000000 00000000 00000000) MO_DMA25_PTR2: 00184ab8 (00000000 00011000 01001010 10111000) MO_DMA25_CNT1: 0000002b (00000000 00000000 00000000 00101011) MO_DMA25_CNT2: 00000000 (00000000 00000000 00000000 00000000) MO_DMA26_PTR2: 00184aa8 (00000000 00011000 01001010 10101000) MO_DMA26_CNT1: 0000000e (00000000 00000000 00000000 00001110) MO_DMA26_CNT2: 00000000 (00000000 00000000 00000000 00000000) 0x0320d01: 05000006 (00000101 00000000 00000000 00000110) 0x0320d02: 00050082 (00000000 00000101 00000000 10000010) 0x0320d03: 00000512 (00000000 00000000 00000101 00010010) 0x0320d04: 00000005 (00000000 00000000 00000000 00000101) 0x0320d2a: 00300034 (00000000 00110000 00000000 00110100) 0x0320d2b: 0000304c (00000000 00000000 00110000 01001100) AUD_POLY0_DDS_CONSTANT: 000a62b4 (00000000 00001010 01100010 10110100) AUD_IIR1_0_SEL: 00000001 (00000000 00000000 00000000 00000001) AUD_IIR1_1_SEL: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR1_2_SEL: 0000001f (00000000 00000000 00000000 00011111) AUD_IIR1_3_SEL: 00000020 (00000000 00000000 00000000 00100000) AUD_IIR1_4_SEL: 0000000d (00000000 00000000 00000000 00001101) AUD_IIR1_5_SEL: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR1_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR1_1_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR1_2_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR1_3_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR1_4_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR1_5_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR2_0_SEL: 00000021 (00000000 00000000 00000000 00100001) AUD_IIR2_1_SEL: 00000023 (00000000 00000000 00000000 00100011) AUD_IIR2_2_SEL: 00000004 (00000000 00000000 00000000 00000100) AUD_IIR2_3_SEL: 00000005 (00000000 00000000 00000000 00000101) AUD_IIR3_0_SEL: 00000004 (00000000 00000000 00000000 00000100) AUD_IIR3_1_SEL: 00000005 (00000000 00000000 00000000 00000101) AUD_IIR3_2_SEL: 00000003 (00000000 00000000 00000000 00000011) AUD_IIR3_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR3_1_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR3_2_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR4_0_SEL: 0000001d (00000000 00000000 00000000 00011101) AUD_IIR4_1_SEL: 00000019 (00000000 00000000 00000000 00011001) AUD_IIR4_2_SEL: 00000008 (00000000 00000000 00000000 00001000) AUD_IIR4_0_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_IIR4_1_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR4_2_SHIFT: 00000007 (00000000 00000000 00000000 00000111) AUD_IIR4_0_CA0: 0003e57e (00000000 00000011 11100101 01111110) AUD_IIR4_0_CA1: 00005e11 (00000000 00000000 01011110 00010001) AUD_IIR4_0_CA2: 0003a7cf (00000000 00000011 10100111 11001111) AUD_IIR4_0_CB0: 00002368 (00000000 00000000 00100011 01101000) AUD_IIR4_0_CB1: 0003bf1b (00000000 00000011 10111111 00011011) AUD_IIR4_1_CA0: 00006349 (00000000 00000000 01100011 01001001) AUD_IIR4_1_CA1: 00006f27 (00000000 00000000 01101111 00100111) AUD_IIR4_1_CA2: 0000e7a3 (00000000 00000000 11100111 10100011) AUD_IIR4_1_CB0: 00005653 (00000000 00000000 01010110 01010011) AUD_IIR4_1_CB1: 0000cf97 (00000000 00000000 11001111 10010111) AUD_IIR4_2_CA0: 00006349 (00000000 00000000 01100011 01001001) AUD_IIR4_2_CA1: 00006f27 (00000000 00000000 01101111 00100111) AUD_IIR4_2_CA2: 0000e7a3 (00000000 00000000 11100111 10100011) AUD_IIR4_2_CB0: 00005653 (00000000 00000000 01010110 01010011) AUD_IIR4_2_CB1: 0000cf97 (00000000 00000000 11001111 10010111) AUD_HP_MD_IIR4_1: 00000001 (00000000 00000000 00000000 00000001) AUD_HP_PROG_IIR4_1: 0000001a (00000000 00000000 00000000 00011010) AUD_DN0_FREQ: 0000312b (00000000 00000000 00110001 00101011) AUD_DN1_FREQ: 00003318 (00000000 00000000 00110011 00011000) AUD_DN1_SRC_SEL: 00000017 (00000000 00000000 00000000 00010111) AUD_DN1_SHFT: 00000007 (00000000 00000000 00000000 00000111) AUD_DN1_AFC: 00000000 (00000000 00000000 00000000 00000000) AUD_DN1_FREQ_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DN2_FREQ: 00003551 (00000000 00000000 00110101 01010001) AUD_DN2_SRC_SEL: 00000001 (00000000 00000000 00000000 00000001) AUD_DN2_SHFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DN2_AFC: 00000002 (00000000 00000000 00000000 00000010) AUD_DN2_FREQ_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_PDET_SRC: 00000014 (00000000 00000000 00000000 00010100) AUD_PDET_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH0_SRC_SEL: 0000000b (00000000 00000000 00000000 00001011) AUD_DEEMPH1_SRC_SEL: 0000000d (00000000 00000000 00000000 00001101) AUD_DEEMPH0_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH1_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH0_G0: 00000800 (00000000 00000000 00001000 00000000) AUD_DEEMPH0_A0: 0000777a (00000000 00000000 01110111 01111010) AUD_DEEMPH0_B0: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH0_A1: 0003f062 (00000000 00000011 11110000 01100010) AUD_DEEMPH0_B1: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH1_G0: 00000800 (00000000 00000000 00001000 00000000) AUD_DEEMPH1_A0: 0000777a (00000000 00000000 01110111 01111010) AUD_DEEMPH1_B0: 00000000 (00000000 00000000 00000000 00000000) AUD_DEEMPH1_A1: 0003f062 (00000000 00000011 11110000 01100010) AUD_DEEMPH1_B1: 00000000 (00000000 00000000 00000000 00000000) AUD_DMD_RA_DDS: 002a4f1d (00000000 00101010 01001111 00011101) AUD_RATE_ADJ1: 00000100 (00000000 00000000 00000001 00000000) AUD_RATE_ADJ2: 00000200 (00000000 00000000 00000010 00000000) AUD_RATE_ADJ3: 00000300 (00000000 00000000 00000011 00000000) AUD_RATE_ADJ4: 00000400 (00000000 00000000 00000100 00000000) AUD_RATE_ADJ5: 00000500 (00000000 00000000 00000101 00000000) AUD_C2_UP_THR: 00005400 (00000000 00000000 01010100 00000000) AUD_C2_LO_THR: 00003000 (00000000 00000000 00110000 00000000) AUD_C1_UP_THR: 00007000 (00000000 00000000 01110000 00000000) AUD_C1_LO_THR: 00005400 (00000000 00000000 01010100 00000000) AUD_CTL: 00001208 (00000000 00000000 00010010 00001000) AUD_DCOC_0_SRC: 0000001a (00000000 00000000 00000000 00011010) AUD_DCOC_1_SRC: 0000001b (00000000 00000000 00000000 00011011) AUD_DCOC1_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_DCOC_1_SHIFT_IN0: 0000000a (00000000 00000000 00000000 00001010) AUD_DCOC_1_SHIFT_IN1: 00000008 (00000000 00000000 00000000 00001000) AUD_DCOC_PASS_IN: 00000003 (00000000 00000000 00000000 00000011) AUD_DCOC_2_SRC: 0000001b (00000000 00000000 00000000 00011011) AUD_IIR4_0_SEL: 0000001d (00000000 00000000 00000000 00011101) AUD_POLY0_DDS_CONSTANT: 000a62b4 (00000000 00001010 01100010 10110100) AUD_PHASE_FIX_CTL: 00000000 (00000000 00000000 00000000 00000000) AUD_CORDIC_SHIFT_1: 00000007 (00000000 00000000 00000000 00000111) AUD_PLL_EN: 00000000 (00000000 00000000 00000000 00000000) AUD_PLL_PRESCALE: 00000002 (00000000 00000000 00000000 00000010) AUD_PLL_INT: 0000001e (00000000 00000000 00000000 00011110) AUD_AFE_12DB_EN: 00000001 (00000000 00000000 00000000 00000001) AUD_DBX_IN_GAIN: 00000000 (00000000 00000000 00000000 00000000) AUD_DBX_WBE_GAIN: 00000000 (00000000 00000000 00000000 00000000) AUD_DBX_SE_GAIN: 00000000 (00000000 00000000 00000000 00000000) AUD_OUT1_SHIFT: 00000000 (00000000 00000000 00000000 00000000) AUD_INIT: 00000004 (00000000 00000000 00000000 00000100) AUD_STATUS: 0000fbf2 (00000000 00000000 11111011 11110010) AUD_VOL_CTL: 000001c0 (00000000 00000000 00000001 11000000) AUD_BAL_CTL: 00000000 (00000000 00000000 00000000 00000000) end of dump