User:Woodsb02: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (Change Images to thumbs)
No edit summary
 
(9 intermediate revisions by the same user not shown)
Line 8: Line 8:
[http://www.yuan.com.tw/en/products/vdo_pd300.html Details]
[http://www.yuan.com.tw/en/products/vdo_pd300.html Details]



'''Note: I have recently got this to work with linux!'''

Here is how I did it:

I edited

''linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h''

and changed ''USB_PID_WT220U_COLD from 0x0222 to 0x0220''.
I then put the dvb-usb-wt220u-02.fw firmware file into my /lib/firmware/`uname -r`/ directory and everything worked fine.
Thanks to jochen and David May.


'''Other details of card:'''


lsusb gives the following output:
lsusb gives the following output:
Line 36: Line 51:


- T0540113 (sticker)
- T0540113 (sticker)


Here's my info for my card

$ lsusb -v

Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E

Device Descriptor:

bLength 18

bDescriptorType 1

bcdUSB 2.00

bDeviceClass 0 (Defined at Interface level)

bDeviceSubClass 0

bDeviceProtocol 0

bMaxPacketSize0 64

idVendor 0x14aa AVerMedia (again) or C&E

idProduct 0x0221

bcdDevice 5.21

iManufacturer 1 Digital TV Receiver

iProduct 2 Digital TV Receiver

iSerial 0

bNumConfigurations 1

Configuration Descriptor:

bLength 9

bDescriptorType 2

wTotalLength 64

bNumInterfaces 2

bConfigurationValue 1

iConfiguration 0

bmAttributes 0x80

(Bus Powered)

MaxPower 450mA "


$ dmesg

dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.

usbcore: registered new driver dvb_usb_dtt200u "


$ lsmod

dvb_usb_dtt200u 8708 0

dvb_usb 16136 1 dvb_usb_dtt200u

dvb_core 73792 1 dvb_usb

dvb_pll 10372 1 dvb_usb "

Latest revision as of 15:49, 5 October 2006

Yuan PD300 Package
Yuan PD300 USBStick
Inside USBStick 1
Inside USBStick 2

I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.


Details


Note: I have recently got this to work with linux!

Here is how I did it:

I edited

linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h

and changed USB_PID_WT220U_COLD from 0x0222 to 0x0220. I then put the dvb-usb-wt220u-02.fw firmware file into my /lib/firmware/`uname -r`/ directory and everything worked fine. Thanks to jochen and David May.


Other details of card:

lsusb gives the following output:

Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E


The chips inside it have the following writing:

1) EPCOS X7350P 3356 MXT5

2) MT2060 MOE360007J 0305-A3

3) I3 D AT02

4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612

5) 1B15C

6) AIPE12


Other text on the board:

- PD-300 REV 2.3 MADE IN TAIWAN

- BT B 94V-0 0522

- T0540113 (sticker)


Here's my info for my card

$ lsusb -v

Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E

Device Descriptor:

 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 idVendor           0x14aa AVerMedia (again) or C&E
 idProduct          0x0221 
 bcdDevice            5.21
 iManufacturer           1 Digital TV Receiver
 iProduct                2 Digital TV Receiver
 iSerial                 0 
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           64
   bNumInterfaces          2
   bConfigurationValue     1
   iConfiguration          0 
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              450mA "


$ dmesg

dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.

usbcore: registered new driver dvb_usb_dtt200u "


$ lsmod

dvb_usb_dtt200u 8708 0

dvb_usb 16136 1 dvb_usb_dtt200u

dvb_core 73792 1 dvb_usb

dvb_pll 10372 1 dvb_usb "