AVerMedia AVerTV DVB-T Super 007: Difference between revisions
mNo edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
[[Image:Super 007 box.jpg|thumb|250px|DVB-T Super 007 with Box]] |
[[Image:Super 007 box.jpg|thumb|250px|DVB-T Super 007 with Box]] |
||
[[Image:Super 007 card.jpg|thumb|250px|A closer look at the card]] |
[[Image:Super 007 card.jpg|thumb|250px|A closer look at the card]] |
||
A [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[AVerMedia]]. |
A Hybrid [[DVB-T]] [[DVB-T PCI Cards|PCI card]] from [[AVerMedia]]. |
||
([http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877 Product Website]) |
([http://www.avermedia.com/EN/Default.aspx?TYPE=vipplayercard.htm&PT=product&tv_TCAT_POS=0&PID=4710710671877 Product Website]) |
||
Revision as of 18:57, 15 August 2007
A Hybrid DVB-T PCI card from AVerMedia. (Product Website)
Hardware
It uses the following chips:
SAA7131E/03/G CG9033 07 SF2105.1 TSG07012 TDA10046A SC8574.1 12 ZSG 06101 8275AC1 CG4773 01 TPG07011
Running the command # lspci -vv yeilds:
01:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decode r (rev d1) Subsystem: Avermedia Technologies Inc Unknown device f01d Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- > SERR- <PERR- Latency: 32 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 209 Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
and # lspci -vn:
01:09.0 0480: 1131:7133 (rev d1) Subsystem: 1461:f01d Flags: bus master, medium devsel, latency 32, IRQ 209 Memory at e2002000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2
The card has Antenna In and IF receiver In;
Support
The DVB-T works fine with the patch from "http://lists.zerezo.com/video4linux/msg19205.html". The firmware is needed, use the updated get_dvb_firmware script or use the file "TT_PCI_2.19h_28_11_2006/software/OEM/PCI/App/ttlcdacc.dll" contained in http://technotrend-online.com/download/software/219/TT_PCI_2.19h_28_11_2006.zip, which you'll have to rename to /lib/firmware/dvb-fe-tda10046.fw.
After applying the installing the patched modules and the firmware you will have to run:
rmmod saa7134 modprobe saa7134 card=109
until the card gets patched with autodetection in trunk.
dmesg output (with patch):
saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 209, latency: 32, mmio: 0xe2002000 saa7133[0]: subsystem: 1461:f01d, board: Philips Tiger - S Reference design [card=109,insmod option] saa7133[0]: board init: gpio is 240000 tuner 2-004b: chip found @ 0x96 (saa7133[0]) tuner 2-004b: setting tuner address to 60 tuner 2-004b: type set to tda8290+75a saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tuner 2-004b: setting tuner address to 60 tuner 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision 0 -- invalid tda1004x: waiting for firmware upload... tda1004x: found firmware revision 20 -- ok
RF remote control
TODO