Anysee E30C Plus: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (mention that the firmware files are not needed for this device)
No edit summary
Line 9: Line 9:
* Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be
* Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be
* NXP/Philips TDA10023HT (digital demodulator)
* NXP/Philips TDA10023HT (digital demodulator)
* ? (decoder) .... its a 32pin IC ... meaning its NOT the cx25843 as earlier reported
* ? (decoder) .... its a 32pin IC ... meaning its NOT the cx25843 as earlier reported, and not a conexant reference design
* Cypress CY7C63108A (i.e. FX2LP) (USB bridge)
* Cypress CY7C63108A (i.e. FX2LP) (USB bridge)
* PIC16LF7 (?) ... likely for external audio input or handling of remote control
* PIC16LF7 (?) ... likely for external audio input or handling of remote control. the device is bundled with a remote control, so probably latter.



In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM, but apparently they have nothing to do with this particular device.
In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM, but apparently they have nothing to do with this particular device.
Line 20: Line 19:


==External Links==
==External Links==
* [http://www.anysee.com/eng/product/anyseeE30CPlus.php E30C Plus product page]
* [http://www.anysee.com/eng/product/anyseeE30CPlus.php E30C Plus product page] (states "external a/v input" which is probably a copy-paste error since the device only has USB connector and Antenna in, like shown in the pics on the same page)

Revision as of 19:34, 17 September 2007

An DVB-C USB 2.0 device from Anysee.

Like other devices from Anysee bearing "Plus" in their product name, a smart card interface is present.

Components Used

  • Samsung DTOS403IH102A (tuner module)
    • ? (tuner IC)
    • ? (analog IF demodulator)
  • Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be
  • NXP/Philips TDA10023HT (digital demodulator)
  • ? (decoder) .... its a 32pin IC ... meaning its NOT the cx25843 as earlier reported, and not a conexant reference design
  • Cypress CY7C63108A (i.e. FX2LP) (USB bridge)
  • PIC16LF7 (?) ... likely for external audio input or handling of remote control. the device is bundled with a remote control, so probably latter.

In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM, but apparently they have nothing to do with this particular device.

Pics

Anysee E30 Plus DVB-C-1 mediumsize.jpg Anysee E30 Plus DVB-C-2 mediumsize.jpg Anysee E30 Plus DVB-C-3 mediumsize.jpg Anysee E30 Plus DVB-C-4 mediumsize.jpg

External Links

  • E30C Plus product page (states "external a/v input" which is probably a copy-paste error since the device only has USB connector and Antenna in, like shown in the pics on the same page)