Twinhan VP-1030A: Difference between revisions
(Some formatting) |
m (Added category: DVB-S PCI Cards) |
||
| Line 110: | Line 110: | ||
As the dst_ca driver is still under development, the results of this page may change. |
As the dst_ca driver is still under development, the results of this page may change. |
||
[[Category:DVB-S]] |
[[Category:DVB-S PCI Cards]] |
||
[[Category:Hardware]] |
|||
Latest revision as of 02:20, 4 May 2009
The VP-1030A is supported under Linux.
Overview/Features
("DST-030") (dst)
features: fullts, CI unsupported
card driver: dvb-bt8xx
interface: PCI
PCI device id: 14f1:8804
PCI subsystem id: 1822:0001
Bridge: bt8xx
frontend 1: LG
frontend driver: dst
CI: unsupported by current LinuxTV drivers, supported only by vendor drivers for kernel 2.4.20
Notes: The frontends on these cards are hidden behind an ASIC - no need to know the full details.
The actual card type is determined by interrogating the onboard EEPROM.
The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from TwinHan !
This card uses the bttv driver. Well supported by LinuxTV drivers.
The Common Interface is not directly accessible via the LinuxTV drivers, but CAM initialization commands can be achieved via the PCI card interface.
The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.
Analogue BT-848 or BT-878 based cards must be removed before use.
The tuner is very weak. You can't receive every channel, even when you use 2 meter dish. You can receive more channels when using Linux instead of Windows.
More Photos
The backside view of the card
The CAM removed from the card
The Irdeto CAM that i used with the closed source driver
Making it Work
Firmware
N/A
Drivers
Required modules and parameters:
dvb_core dvb_shutdown_timeout=0
bttv i2c_hw=1 card=0x71
bt878
dst
dvb_bt8xx
CAM tests
Feel free to update this table with other types of CAMs.
| Type | HW version | Viaccess version | Application version | Results |
|---|---|---|---|---|
| SCM Red Viaccess | 1.0 | ? | ? | Working, but random failures are observed every few hours with TPS |
| Aston Mediaguard P/N 901274 | 1.2 | ? | ? | Working, not enough tests done |
| Aston Viaccess Pro | ? | ? | ? | Not working |
| Aston Mediaguard Pro | ? | ? | ? | Not working |
| Matrix CAM | ? | ? | ? | Not working (tried mr1180, mvr223, mrb303 firmwares) |
| Irdeto II CAM | ? | ? | ? | Working |
| FREE X-TV CAM | ? | ? | ? | Not working |
As the dst_ca driver is still under development, the results of this page may change.