TerraTec Cinergy C DVB-C

File:Filename

caption

This article is a stub or is incomplete.

This article requires expansion. Please help add informative information if you can.

A DVB-C PCI card from TerraTec.

Drivers: work in progress; see below

Overview/Features

Discuss the features and facets of the device here ... this means you

Looks to be a clone of the Azurewave/Twinhan AD-CP400 (VP-2040) [1]

Components Used

list the hardware ICs and modules used by the device here ... this means you

• NXP/Philips CU1216 module
  • NXP/Philips TDA10023 (demodulator)
• Mantis (bridge)

Identification

$ lspci -v -s 01:01.0
01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
       Subsystem: TERRATEC Electronic GmbH Unknown device 1178
       Flags: bus master, medium devsel, latency 64, IRQ 22
       Memory at cfdff000 (32-bit, prefetchable) [size=4K]

$ lspci -vvn -s 01:01.0
01:01.0 0480: 1822:4e35 (rev 01)
        Subsystem: 153b:1178
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at cfdff000 (32-bit, prefetchable) [size=4K]

Other Images

use the included code to insert other images if necessary ...

• Filename

  description

• Filename

  description

• ...

Making it Work

Firmware

is there any firmware specific information for this device? if so, list it here ... this means you

Drivers

provide the details of where the drivers and patches and necessary tools are available ... this means you

Works with latest drivers from [2] (23 Feb 2008). Apart from which tree to check out and use, follow the normal build/install procedure.

Warning: As of 2008-04-28 there is a bug in the current driver, which freezes w_scan/dvbscan. http://jusst.de/hg/mantis/archive/af18967ffcc9.tar.bz2 is confirmed to work fine

Sample kernel output

provide the relevant portion of dmesg here

With latest build from [3]:

[   47.563542] found a VP-2040 PCI DVB-C device on (01:01.0),
[   47.563543]     Mantis Rev 1 [153b:1178], irq: 22, latency: 64
[   47.563545]     memory: 0xcfdff000, mmio: 0xf89de000
[   47.566227]     MAC Address=[00:08:ca:1c:73:1d]
[   47.566254] mantis_alloc_buffers (0): DMA=0x37850000 cpu=0xf7850000 size=65536
[   47.566292] mantis_alloc_buffers (0): RISC=0x37913000 cpu=0xf7913000 size=1000
[   47.566332] DVB: registering new adapter (Mantis dvb adapter)
[   48.086203] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[   48.088334] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend 0x0c
[   48.088378] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success
[   48.088424] DVB: registering frontend 0 (Philips TDA10023 DVB-C)...
[   54.367799] mantis_ack_wait (0): Slave RACK Fail !

Remote Control Support

RC works after applying the following patch. See [4] NOTE: I wonder why this patch has not been merged into the trunk. Does it break anything?

External Links

• Terratec product page