Archived:ASUS P7131 Hybrid-V4L

• ASUS MyCinema P7131 Hybrid

See also:

• Cardlist.saa7134
• Generic SAA7134 Card Installation

Remote control

An IR remote control is supplied. There is a sensor cable that must be plugged into the card.

Card features

• PCI
• Video/audio decoder: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
• RF formats: PAL, DVB-T
• Analog demodulator: ??
• TV tuner: tda8290+75
• FM radio chip: ??

The card does not have an AD for sound

Card connectors

• PAL TV RF signal: IEC connector
• DVB-T RF signal: IEC connector
• FM radio RF signal: IEC connector (shared with ??)
• Video Input: S-Video mini-DIN
• IR-Remote: 2.5mm jack

Bugs

This is not tested yet:

Get firmware, old option

In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config change the entry

 .request_firmware = NULL

to

 .request_firmware = philips_tu1216_request_firmware

Run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware

 modprobe saa7134 card=78 gpio_tracking=1

See http://www.spinics.net/lists/vfl/msg27672.html

Get firmware, new option

The Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112. The card can then be brought up with

 modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1

You may also need to

 modprobe saa7134-dvb
 modprobe saa7134-alsa

This works now but may not continue to do so.

Module Options

For analog signal (autodetected?):

 saa7134 card=78 tuner=54

Links

• http://www.mail-archive.com/linux-dvb@linuxtv.org/msg22647.html (Remote control)
• http://gentoo-wiki.com/Saa7134_quick_guide