Archived:ASUS P7131 Hybrid-V4L: Difference between revisions
(→Links) |
(→Links) |
||
Line 78: | Line 78: | ||
Discussions: |
Discussions: |
||
⚫ | |||
* http://archives.devshed.com/forums/linux-97/dvb-t-on-asustek-p7131-dual-device-4876t-1966310.html |
* http://archives.devshed.com/forums/linux-97/dvb-t-on-asustek-p7131-dual-device-4876t-1966310.html |
||
* http://ubuntuforums.org/showthread.php?t=195686 (Someone who successfully have used the card) |
* http://ubuntuforums.org/showthread.php?t=195686 (Someone who successfully have used the card) |
||
Old discussions (may no longer be relevant): |
|||
⚫ | |||
* http://www.mail-archive.com/linux-dvb@linuxtv.org/msg19579.html |
|||
* http://www.spinics.net/lists/vfl/msg27672.html |
Revision as of 12:36, 25 June 2007
- ASUS MyCinema P7131 Hybrid
See also:
Remote control
An IR remote control is supplied. There is a sensor cable that must be plugged into the card.
The remote requires Linux 2.6.22
Card features
- PCI
- Video/audio decoder: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
- RF formats: PAL, DVB-T
- Analog demodulator: ??
- TV tuner: tda8290+75
- FM radio chip: ??
The card does not have an AD for sound
Card connectors
- RF signal: Two IEC connectors
- Video Input: S-Video mini-DIN
- IR-Remote: 2.5mm jack
- Audio output: Card internal
The RF inputs are for:
- PAL TV RF signal
- DVB-T RF signal
- FM radio RF signal
The original documentation says:
Upper IEC connector is marked "RF/FM-IN" and is for FM radio and DVB-T
Lower IEC connector is marked "CATV-IN" and is for PAL TV
The FM radio is fixed to the upper connector, but for TV (PAL and DB-T) the connectors can apparently be controlled by software. This is TBD. ???
Bugs
This is not tested yet:
Get firmware, old option
In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config change the entry
.request_firmware = NULL
to
.request_firmware = philips_tu1216_request_firmware
Run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware
modprobe saa7134 card=78 gpio_tracking=1
See http://www.spinics.net/lists/vfl/msg27672.html
Get firmware, new option
The Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112. The card can then be brought up with
modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1
You may also need to
modprobe saa7134-dvb modprobe saa7134-alsa
This works now but may not continue to do so.
lspci -v
Module Options
For analog signal (autodetected?):
saa7134 card=78 tuner=54
Kernel output
Links
- http://gentoo-wiki.com/HARDWARE_saa7134 (Generic)
- http://www.mail-archive.com/linux-dvb@linuxtv.org/msg22647.html (Remote control)
- http://gentoo-wiki.com/Saa7134_quick_guide
- http://www.thadathil.net/dvb/fw/ (Firmware repository)
Discussions:
- http://archives.devshed.com/forums/linux-97/dvb-t-on-asustek-p7131-dual-device-4876t-1966310.html
- http://ubuntuforums.org/showthread.php?t=195686 (Someone who successfully have used the card)
Old discussions (may no longer be relevant):