DVB via USB: Difference between revisions
Line 152: | Line 152: | ||
! The only known USB2.0 device with a [[DiB3000M-B]] demodulator. |
! The only known USB2.0 device with a [[DiB3000M-B]] demodulator. |
||
! [http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333] |
! [http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333] |
||
|- align="left" |
|||
! VideoWalker DVB-T USB |
|||
! USB1.1 |
|||
! dvb-usb-adstech-usb2-02.fw |
|||
! - |
|||
! [http://www.geniusnet.com.tw/product/product-1.asp?pdtno=541] |
|||
|- |
|- |
||
|} |
|} |
Revision as of 23:49, 7 June 2005
Introduction
Here is a market overview of available DVB/ATSC USB devices sorted by its required LinuxTV driver (if supported - and yes - most of them are). Generally it is a good idea to use dvb-kernel from CVS, because some drivers can be very new and thus have not made their way into the mainstream kernel.
Please help to keep this list up-to-date so that it is useful for everyone!
For all devices shown below you need to load (if not compiled into the kernel):
- i2c-core - crc32 - firmware_class - dvb-core.ko - dvb-pll.ko
and maybe others too. If the loading fails for any particular module you'll get a "unkown symbol"-message. Then take a look at dmesg to find out, which symbols (functions) are missing. After you've found out which module was absent, please come back here and add it to the list/device-entry.
Firmware: Most of the USB devices need a firmware to run. Some of the firmware files can be downloaded here: [1].
Legend: the field type specifies the real USB-standard of the device
- USB1.1: the device can be run on the USB1.1 and on the USB2.0 bus but only with USB1.1-speed. - USB2.0: the device can only be connected to a real USB2.0 port and runs with USB2.0-speed. (delivering the complete Transport Stream to the software demuxer.) - USB2.0/USB1.1: the device is actually USB2.0, but can also be driven on a USB1.1 port. (if not mentioned elsewhere, these boxes can deliver the complete Transport Stream when running in USB2.0 mode)
DVB-T
AVerMedia AverTV A800
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dib3000-common.ko - dib3000mc.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-a800.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DiBcom 3000P
Comment: Devices listed below are clones of a DVB-T USB2.0 reference design made by DiBcom.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
AVerMedia AVerTV DVB-T USB 2.0 | USB2.0/USB1.1 | dvb-usb-avertv-a800-02.fw | Remote control handling is different to the one used in the other DiBusb clones. | [2] |
DiBcom USB1.1 DVB-T devices (based on the DiB3000M-B)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dib3000-common.ko - dib3000mb.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-dibusb-mb.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DiBcom 3000M-B
Comment: Most of these device listed below are (sometimes slightly modified) clones of a DVB-T USB1.1 reference design made by DiBcom.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
TwinhanDTV USB-Ter (VP7041) | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | first DVB-T USB box on the market with dib3000mb built-in | [3] |
TwinhanDTV Magic Box (VP7041e) | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [4] |
HAMA DVB-T USB1.1 device | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [5] |
CTS Portable (Chinese Television System) | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [6] |
DigitalRise DVB-T USB 1.1 Ter | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [7] |
KWorld V-Stream XPERT DTV DVB-T USB | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [8] |
JetWay DTV DVB-T USB | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [9] |
ADSTech Instant TV DVB-T USB | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [10] |
Ultima Electronic/Artec T1 USB TVBOX | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw or dvb-usb-dibusb-an2235-01.fw |
There are several clones of this device: some have the AN2235 USB controller instead of the AN2135. Some using a Panasonic tuner instead of the default Thomson Cable tuner. Most of the Boxes have standard Cypress USB IDs which makes it very hard to identify them. A HowTo for this devices can be found here. | [11] |
Compro Videomate DVB-U2000 | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [12] |
Grandtec DVB-T USB1.1 | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [13] |
AVerMedia AverTV DVBT USB | USB1.1 | dvb-usb-dibusb-5.0.0.11.fw | - | [14] |
ADSTech Instant TV DVB-T USB2.0 (dark blue) | USB2.0/USB1.1 | dvb-usb-adstech-usb2-02.fw | The only known USB2.0 device with a DiB3000M-B demodulator. | [15] |
VideoWalker DVB-T USB | USB1.1 | dvb-usb-adstech-usb2-02.fw | - | [16] |
DiBcom USB2.0 DVB-T devices (based on the DiB3000M-C/P)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dib3000-common.ko - dib3000mc.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-dibusb-mc.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DiBcom 3000M-C - DiBcom 3000P
Comment: Devices listed below are clones of a DVB-T USB2.0 reference design made by DiBcom.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Artec T1 USB2.0 | USB2.0/USB1.1 | dvb-usb-dibusb-6.0.0.8.fw | not confirmed yet. | [17] |
HanfTek UMT-010
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- mt352.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-umt-010.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: The USB protocol which is used by this device is equal to the one used in DiBcom USB2.0 reference design. Thanks to Hanftek who especially wrote a firmware for easy Linux-Support.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Hanftek UMT-010 | USB2.0 | dvb-usb-umt-010-02.fw | Stick-sized. Different colors (blue, gray, red). | [18] |
Hauppauge WinTV-NOVA-T usb2
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dib3000-common.ko - dib3000mc.ko - dvb-usb.ko - dvb-usb-dibusb-common.ko - dvb-usb-nova-t-usb2.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DiBcom 3000P
Comment: Devices listed below are clones of a DVB-T USB2.0 reference design made by DiBcom.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Hauppauge WinTV NOVA-T USB2 | USB2.0/USB1.1 | dvb-usb-nova-t-usb2-01.fw | It has a MAC address. | [19] |
TerraTec Cinergy T²
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- cinergyT2.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: The programming of the MT352 is hidden behind the USB protocol defined within the firmware.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
TerraTec Cinergy T² | USB2.0 | - | - | [20] |
Twinhan DVB-T USB2.0
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-vp7045.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: The programming of the MT352 is hidden behind the USB protocol defined within the firmware.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
TwinhanDTV Alpha | USB2.0 | dvb-usb-vp7045-01.fw | Stick-sized. | [21] |
TwinhanDTV MagicBoxII | USB2.0 | dvb-usb-vp7045-01.fw | - | [22] |
DigitalNow TinyUSB 2 DVB-t | USB2.0 | dvb-usb-vp7045-01.fw | Stick-sized. | [23] |
DigitalRise DVB-T USB 2.0 Ter Beetle | USB2.0 | dvb-usb-vp7045-01.fw | - | [24] |
Yakumo/Hama/Typhoon/Yuan
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-dtt200u.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: The programming of the MT352 is hidden behind the USB protocol defined within the firmware. These boxes can only deliver part of the Transport Stream (using a hardware PID filter) which is not known how to be deactivated. (The driver was completely reverse-engineered without the help of its real vendor (Who is the _real_ vendor, actually))
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Yakumo DVB-T mobile USB | USB2.0/USB1.1 | dvb-usb-dtt200u-01.fw | aka DTT200U | [25] |
Yuan DVB2GO UB300 | USB2.0/USB1.1 | dvb-usb-dtt200u-01.fw | - | [26] |
Hama DVB-T Box | USB2.0/USB1.1 | dvb-usb-dtt200u-01.fw | - | [27] |
TYPHOON USB2.0 DVB-T BOX | USB2.0/USB1.1 | dvb-usb-dtt200u-01.fw | - | [28] |
DVB-C
DVB-S
ATSC
Multi-purpose DVB/ATSC
Technotrend Budget USB1.1 (DVB-S/T/C)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- stv0299.ko - cx22700.ko - tda1004x.ko - tda8083.ko - dvb-ttusb-budget.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- ST STV0299 - Conexant CX22700 - Philips TDA10046 - Philips TDA8083
Comment:
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Hauppauge WinTV-NOVA-S usb | USB1.1 | - | - | [29] |
Hauppauge WinTV-NOVA-T usb | USB1.1 | dvb-fe-tda10046.fw | - | [30] |
Satelco USB-Box DVB-S/T/C | USB1.1 | dvb-fe-tda10046.fw | DVB-C clone is not supported. | [31] |
Technotrend TT-PCline USB family DVB-S/T/C | USB1.1 | dvb-fe-tda10046.fw | DVB-C clone is not supported. | [32] |
Technotrend DEC Budget USB1.1 (DVB-S/T)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- ttusbdecfe.ko - ttusb_dec.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DEC-specific
Comment: The DECs are Set-Top-Boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC-Output.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Hauppauge DEC3000-S (DVB-S) | USB1.1 | dvb-ttusb-dec-3000s.fw | - | [33] |
Hauppauge DEC2000-T (DVB-T) | USB1.1 | dvb-ttusb-dec-2000t.fw | - | [34] |
Hauppauge DEC1100-T (DVB-T) | USB1.1 | - | not supported (?) | [35] |
Hauppauge DEC2540-T (DVB-T) | USB1.1 | - | Similar to DEC2000-T but with Conax(?) decrypt card slot. Decryption is not supported under GNU/Linux. | - |
Technisat/B2C2 Sky/Air/Cable2PC USB (Flexcop-based) (DVB-S/T/C / ATSC)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- stv0299.ko - stv0297.ko - mt352.ko - mt312.ko - nxt2002.ko - bcm3510.ko - b2c2-flexcop.ko - b2c2-flexcop-usb.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- ST STV0299 - ST STV0297 - MT312 - Zarlink MT352 - NextWave 2002 - Broadcom BCM3510
Comment:
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Technisat/B2C2 SkyStar USB | USB1.1 | - | - | [36] |
Technisat/B2C2 AirStar USB DVB-T | USB1.1 | - | - | [37] |
Technisat/B2C2 AirStar USB ATSC | USB1.1 | dvb-fe-bcm3510-01.fw | - | [38] |
Technisat/B2C2 CableStar USB | USB1.1 | - | Discontinued | - |
Hybrid (DVB/Analogue)
Hybrid devices have a DVB-demodulator and a analogue capturing chip. Normally they share a tuner.
Medion MD97500 (DVB-T)
All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices:
- cx22702.ko - dvb-usb.ko - dvb-usb-cxusb.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Conexant CX22702
Comment: The analogue part (handled by a Conexant CX25842) is not supported yet. The cx25840-driver from ivtv can be used to implement support.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Medion MD97500 | USB2.0 | - | The box also has a X10-remote (radio, not IR) included (supported by the atiremote-driver) and a USB2.0 hub (Tetrahub) (one additional USB port). Both of them are working without plugging the power adapter. | - |
Work-In-Progress
DViCO FusionHDTV USB - DVB-T
This driver is still Work-In-Progress. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-bluebird.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: The preliminary version of the driver is not public yet, because it very unstable/incomplete. If you want to help develop the driver, please consult the linux-dvb Mailing list.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
DViCO FusionHDTV USB | USB2.0 | dvb-usb-bluebird-01.fw | There is a working MAC driver written by John Dalgliesh. It can be used to write the Linux-Driver. | [39] |
Nebula DigiTV USB version - DVB-T
This driver is still Work-In-Progress. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-digitv.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352 - NextWave 6000
Comment: A preliminary version of the driver can be found in dvb-kernel CVS already. If you want to help develop the driver, please consult the linux-dvb Mailing list.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Nebula DigiTV USB | USB2.0 | dvb-usb-digitv-01.fw | There is a SDK for download on the Nebula WebSite, which was used to improve the driver's quality. Was the first USB2.0 box on the Market (late 2003/early 2004). | [40] |
Pinnacle PCTV 200e USB - DVB-T
This driver is pre-Work-In-Progress. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-pctv-200e.ko (probably)
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- Zarlink MT352
Comment: There driver is not written yet. To gather information about the box is the primary task now. If you want to help develop the driver, please consult the linux-dvb Mailing list.
What we know:
- MT352-frontend (i2c addr: 0x1f) - Microtune MT2060 tuner (which is the actual problem, because Microtune has a strict information restriction regarding this product) (i2c addr: 0x60) - (must) have a pid filter - no firmware needed - implements a I2CoverUSB bus
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
Pinnacle PCTV 200e USB - DVB-T | USB2.0/USB1.1 | - (no firmware needed) | Pinnacle claim to be USB2.0 and USB1.1 compatible, so there has to be a PID-filter. | [41] |
TwinhanDTV StarBox - DVB-S
This driver is still Work-In-Progress. The following drivers are needed for these devices:
- dvb-usb.ko - dvb-usb-vp702x.ko
These frontend(s)/demodulator(s) can be found in various revisions of this device:
- DST
Comment: The preliminary version of the driver is not public yet, because it very unstable. If you want to help the development, please consult the linux-dvb Mailing list. The frontend-part of the DST-driver could be rewritten to be used by the USB driver. Currently it is hard-wired to the PCI-cards.
device/model | type | firmware name | comments/quirks | URL/pictures |
---|---|---|---|---|
TwinhanDTV StarBox | USB2.0/USB1.1 | dvb-usb-vp702x-01.fw | - | [42] |
DigitalRise DVB-S USB Sat Starbox | USB2.0/USB1.1 | dvb-usb-vp702x-01.fw | - | [43] |
TYPHOON DVB-S USB 2.0 BOX | USB2.0/USB1.1 | dvb-usb-vp702x-01.fw | - | [44] |
Unspecified/Unkown devices
If you own one or more devices from the following list and you want to help the development, please contact the [[linux-dvb-ml|linux-dvb Mailing list].
Typhoon DVB-T USB DRIVE
This stick could be a clone of the Twinhan Alpha or of the DiBcom Pen reference design.
TwinhanDTV MagicBox Pro (DVB-T/Analogue)
A hybrid USB2.0 box. Maybe it is a clone of the Conexant Hybrid Reference design, too?
YUAN PD300 DVB-T mobility
This pen and/or the other YUAN Pen are clones of the DiBcom pen reference design. It uses the [[dib3000p|DiBcom 3000-P] demodulator and a Microtune MT2060 silicon tuner.
YUAN PD300 DVB-T mini
See DVB_USB#YUAN_PD300_DVB-T_mobility.
YUAN UB701 (DVB-T/Analogue)
A hybrid USB2.0-only box. Maybe it is a clone of the Conexant Hybrid Reference design?