Mystique SaTiX-S2 Dual: Difference between revisions
Jump to navigation
Jump to search
Twoofseven (talk | contribs) (Describe how to build firmware v15.) |
Twoofseven (talk | contribs) (Driver moved to v4l-dvb.) |
||
Line 62: | Line 62: | ||
===Driver=== |
===Driver=== |
||
$ hg clone http://linuxtv.org/hg/ |
$ hg clone http://linuxtv.org/hg/v4l-dvb/ |
||
$ cd v4l-dvb |
$ cd v4l-dvb |
||
$ make |
$ make |
||
$ |
$ make install |
||
==External Links== |
==External Links== |
Revision as of 17:27, 4 February 2010
A nGene based DVB-S2 PCIe card from Mystique. It is identical to the Linux4Media cineS2 DVB-S2 Twin Tuner.
Overview/Features
- PCI-e x1
- Dual Tuner DVB-S/S2 card
- Ultra-Low Profile
Components Used
- PCIe bridge MICRONAS APB 7202A B2
- Dual demodulator STM STV0900B
- Tuner STM STV6110A
- Dual LNB STM LNBH24
Identification
$ lspci -vvvnn 03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:db01] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at feaf0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at feae0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [58] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00 Capabilities: [400] Virtual Channel <?> Kernel driver in use: ngene Kernel modules: ngene
Making it Work
Make sure that the external power supply is connected!!!
Firmware
Build firmware from original ngene source code.
$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz $ tar xzf ngene.tgz $ cd ngene $ cp ngene_fw_15.h ngene_fw_15.c $ gcc -o ngene_15.fw -c ngene_fw_15.c $ objcopy -O binary ngene_15.fw $ cp ngene_15.fw /lib/firmware/
Driver
$ hg clone http://linuxtv.org/hg/v4l-dvb/ $ cd v4l-dvb $ make $ make install