TeVii S480: Difference between revisions
Jump to navigation
Jump to search
| Line 52: | Line 52: | ||
The [[s2-liplianin]] v4l branch includes support for the card. |
The [[s2-liplianin]] v4l branch includes support for the card. |
||
== |
== Driver Status == |
||
27.02.2011 with actual liplianin tree from 27.02.2011: |
|||
* DVB-S is working |
|||
* DVB- |
* DVB-S is working fine with fast zappings around 1s |
||
* DVB-S2 is working fine with fast zappings arround 1-2s |
|||
** maybe the early driver state causes the problem |
|||
* S3 is working, you have to unload/load dvb modules for the suspend and wakeup |
|||
*** testings with windows 7 32bit works with dvb-s2 and both channels, so the issue should be linux-driver related |
|||
* without LNB Power the card uses 4,5W more with a 300W 82% powersupply BQT-L7 300W |
|||
** tested on Astra 19.2E, diseque seemd not to be working |
|||
*** 11303 H, 8PSK 2/3 (ORF/Servus TV): Unwatchable / with Windows ok |
|||
* everything is tested on Astra 19.2E, diseque hasn´t been tested yet with the latest source |
|||
*** 11362 H, 8PSK 2/3 (ARD/ZDF/ARTE): Unwatchable / with Windows ok |
|||
* tested with Kernel 2.6.32-28 (Torsten73) and 2.6.35 (Igor himself) |
|||
* we will get keyboard related input lags, this means after 15s the keyboard didn´t respond for 5s then it works again for 15s. |
|||
** it depends on connected USB devices. Without any other usb devices and a ps2 keyboard you have no problem like this. |
|||
** it´s eaqual using ssh or local keyboard |
|||
** this problem is also only under Linux (testet with ubuntu Lucid and Maverick, Kernel 2.6.32 & 35) |
|||
==External Links== |
==External Links== |
||
Revision as of 20:05, 27 February 2011
A dual DVB-S2 PCIe card from TeVii.
Hardware/Features
- PCIe x1 low profile
- Dual Tuner
- The card consists of a USB Host Controller and two TeVii S660 equivalent cards.
- LNB power supply via floppy connector
The Retail packaging includes full-height and low profile brackets, an IR receiver cable, an IR handset (incl. 2 AAA batteries), a windows drivers CD and an install manual.
Components Used
- RF Tuner (twice): Montage M88TS2020
- Demodulator (twice): Montage M88DS3002
- USB Peripheral Controller (twice): Cypress CY7C68013A-56
- PCIe bridge/USB Host Controller: MosChip MCS9990CV
Identification
lspci -nnk:
04:00.0 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ohci_hcd
04:00.1 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ehci_hcd
04:00.2 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ohci_hcd
04:00.3 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ehci_hcd
04:00.4 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ohci_hcd
04:00.5 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ehci_hcd
04:00.6 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ohci_hcd
04:00.7 USB Controller [0c03]: NetMos Technology MCS9990 PCIe to 4‐Port USB 2.0 Host Controller [9710:9990]
Subsystem: Device [a000:4000]
Kernel driver in use: ehci_hcd
lsusb:
Bus 003 Device 002: ID 9022:d482 TeVii Technology Ltd. Bus 002 Device 002: ID 9022:d481 TeVii Technology Ltd.
Once the module/firmware is loaded it's listed as two TeVii S660 cards.
Linux support
The s2-liplianin v4l branch includes support for the card.
Driver Status
27.02.2011 with actual liplianin tree from 27.02.2011:
- DVB-S is working fine with fast zappings around 1s
- DVB-S2 is working fine with fast zappings arround 1-2s
- S3 is working, you have to unload/load dvb modules for the suspend and wakeup
- without LNB Power the card uses 4,5W more with a 300W 82% powersupply BQT-L7 300W
- everything is tested on Astra 19.2E, diseque hasn´t been tested yet with the latest source
- tested with Kernel 2.6.32-28 (Torsten73) and 2.6.35 (Igor himself)
External Links
Official Website technical discussion on vdrportal in german