Geniatech/MyGica X8507 PCI-Express Hybrid Card: Difference between revisions
| Line 64: | Line 64: | ||
===Sample Kernel Output=== |
===Sample Kernel Output=== |
||
# dmesg |
# dmesg |
||
[ 16.409189] cx23885 driver version 0.0.3 loaded |
|||
| ⚫ | |||
vendor=8086 device=3a44 |
|||
[ 17.344877] cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) |
|||
cx23885 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 |
|||
[ 18.090197] Adding 8391676k swap on /dev/sda5. Priority:-1 extents:1 across:8391676k |
|||
cx23885[0]: Your board isn't known (yet) to the driver. |
|||
[ 18.446691] cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) |
|||
cx23885[0]: Try to pick one of the existing card configs via |
|||
[ 18.787919] i2c-core: driver [tuner] using legacy suspend method |
|||
cx23885[0]: card=<n> insmod option. Updating to the latest |
|||
[ 18.787926] i2c-core: driver [tuner] using legacy resume method |
|||
cx23885[0]: version might help as well. |
|||
[ 18.788455] tuner 6-0061: Tuner -1 found with type(s) Radio TV. |
|||
cx23885[0]: Here is a list of valid choices for the card=<n> insmod option: |
|||
[ 19.226062] xc5000 6-0061: creating new instance |
|||
cx23885[0]: card=0 -> UNKNOWN/GENERIC |
|||
[ 19.226769] xc5000: Successfully identified at address 0x61 |
|||
cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp |
|||
[ 19.226773] xc5000: Firmware has not been loaded previously |
|||
cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 |
|||
[ 19.226893] cx23885[0]: registered device video0 [v4l2] |
|||
cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 |
|||
[ 19.226991] cx23885[0]: registered device vbi0 |
|||
cx23885[0]: card=4 -> DViCO FusionHDTV5 Express |
|||
[ 19.227304] cx23885[0]: registered ALSA audio device |
|||
cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q |
|||
[ 19.235271] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... |
|||
cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 |
|||
[ 19.369880] xc5000: firmware read 12401 bytes. |
|||
cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 |
|||
[ 19.369884] xc5000: firmware uploading... |
|||
cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 |
|||
[ 20.738880] xc5000: firmware upload complete... |
|||
cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 |
|||
| ⚫ | |||
cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express |
|||
| ⚫ | |||
cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express |
|||
[ 21.937453] Registered IR keymap rc-total-media-in-hand-02 |
|||
cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H |
|||
[ 21.937621] input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14 |
|||
cx23885[0]: card=13 -> Compro VideoMate E650F |
|||
[ 21.941251] rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0 |
|||
cx23885[0]: card=14 -> TurboSight TBS 6920 |
|||
[ 22.131412] IR NEC protocol handler initialized |
|||
cx23885[0]: card=15 -> TeVii S470 |
|||
[ 22.159305] IR RC5(x) protocol handler initialized |
|||
cx23885[0]: card=16 -> DVBWorld DVB-S2 2005 |
|||
[ 22.279724] IR RC6 protocol handler initialized |
|||
cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI |
|||
[ 22.330778] IR JVC protocol handler initialized |
|||
cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270 |
|||
[ 22.542289] IR Sony protocol handler initialized |
|||
cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275 |
|||
[ 22.666701] IR SANYO protocol handler initialized |
|||
cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255 |
|||
[ 22.864013] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15 |
|||
cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210 |
|||
[ 22.864171] IR MCE Keyboard/mouse protocol handler initialized |
|||
cx23885[0]: card=22 -> Mygica X8506 DMB-TH |
|||
[ 23.186676] lirc_dev: IR Remote Control driver registered, major 251 |
|||
cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2 |
|||
[ 23.221698] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0 |
|||
cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850 |
|||
[ 23.221705] IR LIRC bridge handler initialized |
|||
cx23885[0]: card=25 -> Compro VideoMate E800 |
|||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
cx23885 0000:03:00.0: setting latency timer to 64 |
|||
===Remote Control Support=== |
===Remote Control Support=== |
||
Revision as of 12:28, 29 January 2013
PCI-Express receiver card, it allows you access free-to-air Brazilian standard digital terrestrial TV , analogue TV, FM radio and digital radio. It record and save TV programs directly in MPEG-II/H264 TS file.
Overview/Features
- PCI-e interface
- Inputs: Antenna, S-Video, Composite, YPbPr, IR and Stereo Audio
Components Used
- Xceive_XC5000 (tuner)
- Fujitsu MB86A20s (demodulator)
- Conexant cx23885 (A/V decoder and PCI Interface)
Other Images
Identification
# lspci -vvvnn
03:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Conexant Systems, Inc. Device [14f1:8502]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200] Virtual Channel <?>
Kernel driver in use: cx23885
Kernel modules: cx23885
Making it Work
Firmware
Drivers
Sample Kernel Output
# dmesg
[ 16.409189] cx23885 driver version 0.0.3 loaded [ 16.409662] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8507 [card=33,autodetected] [ 17.344877] cx25840 7-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0]) [ 18.090197] Adding 8391676k swap on /dev/sda5. Priority:-1 extents:1 across:8391676k [ 18.446691] cx25840 7-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 18.787919] i2c-core: driver [tuner] using legacy suspend method [ 18.787926] i2c-core: driver [tuner] using legacy resume method [ 18.788455] tuner 6-0061: Tuner -1 found with type(s) Radio TV. [ 19.226062] xc5000 6-0061: creating new instance [ 19.226769] xc5000: Successfully identified at address 0x61 [ 19.226773] xc5000: Firmware has not been loaded previously [ 19.226893] cx23885[0]: registered device video0 [v4l2] [ 19.226991] cx23885[0]: registered device vbi0 [ 19.227304] cx23885[0]: registered ALSA audio device [ 19.235271] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [ 19.369880] xc5000: firmware read 12401 bytes. [ 19.369884] xc5000: firmware uploading... [ 20.738880] xc5000: firmware upload complete... [ 21.841084] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 21.841094] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfd400000 [ 21.937453] Registered IR keymap rc-total-media-in-hand-02 [ 21.937621] input: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0/input14 [ 21.941251] rc0: cx23885 IR (Mygica X8507) as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/rc/rc0 [ 22.131412] IR NEC protocol handler initialized [ 22.159305] IR RC5(x) protocol handler initialized [ 22.279724] IR RC6 protocol handler initialized [ 22.330778] IR JVC protocol handler initialized [ 22.542289] IR Sony protocol handler initialized [ 22.666701] IR SANYO protocol handler initialized [ 22.864013] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input15 [ 22.864171] IR MCE Keyboard/mouse protocol handler initialized [ 23.186676] lirc_dev: IR Remote Control driver registered, major 251 [ 23.221698] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0 [ 23.221705] IR LIRC bridge handler initialized