User:Woodsb02: Difference between revisions

Revision as of 14:25, 3 September 2006

Yuan PD300 Package

Yuan PD300 USBStick

Inside USBStick 1

Inside USBStick 2

I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.

Note: I have recently got this to work with linux!

Here is how I did it:

I edited

linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h

and changed USB_PID_WT220U_COLD from 0x0222 to 0x0220 and everything worked fine. Thanks to jochen and David May.

Other details of card:

lsusb gives the following output:

Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E

The chips inside it have the following writing:

1) EPCOS X7350P 3356 MXT5

2) MT2060 MOE360007J 0305-A3

3) I3 D AT02

4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612

5) 1B15C

6) AIPE12

Other text on the board:

- PD-300 REV 2.3 MADE IN TAIWAN

- BT B 94V-0 0522

- T0540113 (sticker)

Here's my info for my card

$ lsusb -v

Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E

Device Descriptor:

 bLength                18

 bDescriptorType         1

 bcdUSB               2.00

 bDeviceClass            0 (Defined at Interface level)

 bDeviceSubClass         0

 bDeviceProtocol         0

 bMaxPacketSize0        64

 idVendor           0x14aa AVerMedia (again) or C&E

 idProduct          0x0221

 bcdDevice            5.21

 iManufacturer           1 Digital TV Receiver

 iProduct                2 Digital TV Receiver

 iSerial                 0

 bNumConfigurations      1

 Configuration Descriptor:

   bLength                 9

   bDescriptorType         2

   wTotalLength           64

   bNumInterfaces          2

   bConfigurationValue     1

   iConfiguration          0

   bmAttributes         0x80

     (Bus Powered)

   MaxPower              450mA "

$ dmesg

dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.

usbcore: registered new driver dvb_usb_dtt200u "

$ lsmod

dvb_usb_dtt200u 8708 0

dvb_usb 16136 1 dvb_usb_dtt200u

dvb_core 73792 1 dvb_usb

dvb_pll 10372 1 dvb_usb "

@@ Line 50: / Line 50: @@
 - T0540113 (sticker)
-'''News:'''
-It will work but ONLY if you warm boot it inside windows first with the Yakumo BDA driver, then warm boot for instance a KENOTIX 2006 easter-rc4 livecd.
-The second you unplug it and replug it, it will not come back up as there's something not right with the linux firmware usb loading side.
-Is this problem of a cold boot firmware well known? And is there a fix?
 Here's my info for my card