KWorld ATSC 115

Front view of ATSC 115

An ATSC PCI card. This device, which is also known as the KWorld PlusTV HD PCI-115, is physically identical to the earlier released KWorld ATSC 110. Consequently, it is supported (see below for further details).

Differences with the ATSC 110

• The ATSC 115 does, however, have a new PCI subsystem ID of 17de:7352, as shown in the output of lspci -vvnn :

02:09.0 0480: 1131:7133 (rev d1)
        Subsystem: 17de:7352
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fcfdf800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=3 PME-

• The ATSC 115 card also ships with a different remote than the ATSC 110; it is currently unknown if the same keycodes are used.
• It has a shiny new label on the tuner module which graphically displays the word "PlusTV", reflecting the name branding that KWorld has recently begun using
• Has new software (ArcSoft) for Windows based OS Platforms ... which probably won't matter many Linux users

Support Status

The card is currently detected as a generic card by the saa7134 driver. Loading the module with "card=90" should set things up exactly the same as a KWorld ATSC 110. See that device's entry for further details.

External Links

• KWorld product page