Archived:ASUS P7131 Hybrid-V4L: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
|||
| Line 8: | Line 8: | ||
==Card features== |
==Card features== |
||
* PCI |
* PCI [1043:4876] |
||
* Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1) |
|||
* PAL |
* PAL |
||
* DVB-T |
* DVB-T |
||
| Line 16: | Line 17: | ||
* FM radio chip: ?? |
* FM radio chip: ?? |
||
ASUS MyCinema P7131 Hybrid |
|||
* 00:0c.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1) |
|||
* saa7134 card=78 tuner=54 # for analog signal |
|||
* In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config |
|||
* change the entry |
|||
* .request_firmware = NULL, |
|||
* to |
|||
* .request_firmware = philips_tu1216_request_firmware, |
|||
* run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware |
|||
* modprobe saa7134 card=78 gpio_tracking=1 |
|||
* see http://www.spinics.net/lists/vfl/msg27672.html |
|||
* STOP PRESS - the Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112. |
|||
* The card can then be brought up with "modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1". You may also need to modprobe saa7134-dvb and saa7134-alsa. This works now but may not continue to do so. |
|||
==Card connectors== |
==Card connectors== |
||
Revision as of 10:24, 25 June 2007
See also:
Remote control
An IR remote control is supplied. There is a sensor cable that must be plugged into the card.
Card features
- PCI [1043:4876]
- Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
- PAL
- DVB-T
- Video/audio decoder:
- Analog demodulator:
- TV tuner: ??
- FM radio chip: ??
ASUS MyCinema P7131 Hybrid
* 00:0c.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1) * saa7134 card=78 tuner=54 # for analog signal
* In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config * change the entry * .request_firmware = NULL, * to * .request_firmware = philips_tu1216_request_firmware, * run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware * modprobe saa7134 card=78 gpio_tracking=1 * see http://www.spinics.net/lists/vfl/msg27672.html * STOP PRESS - the Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112. * The card can then be brought up with "modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1". You may also need to modprobe saa7134-dvb and saa7134-alsa. This works now but may not continue to do so.
Card connectors
- PAL TV RF signal:
- DVB-T RF signal:
- Video Input: S-Video
- FM radio RF signal: Internal RC jack with flying wire to IEC connector
- IR-Remote: 2.5mm jack