MSI DigiVox mini II V3.0: Difference between revisions
m (→Overview: changing parameters selatt1 sellval1) |
m (→Developer Info: changing selatt1 selval1) |
||
| Line 68: | Line 68: | ||
{{DVB-T_USB_Devices_List_Full/Header |
{{DVB-T_USB_Devices_List_Full/Header |
||
| content = {{DVB-T_USB_Devices_ListData|renderwith=DVB-T_USB_Devices_List_Full/Row/Select| |
| content = {{DVB-T_USB_Devices_ListData|renderwith=DVB-T_USB_Devices_List_Full/Row/Select|selatt1=did|selval1=msi-digivox-mini-ii-v3}} |
||
}} |
}} |
||
Revision as of 17:44, 5 November 2009
MSI DigiVox mini II V3.0 is a DVB-T USB 2.0 device from MSI (see Vendor site for a picture).
- This stick is not the same as the:
- In Germany this device might also be named MSI K-Vox.
Overview
Install
On Ubuntu or Debian Lenny
Using a script by Daniel Holm, it is very easy to install the driver on ubuntu.
wget http://www.danielholm.se/sites/default/files/msi.digivox.mini_.II_.V.3-v3.run chmod +x msi.digivox.mini_.II_.V.3-v3.run ./msi.digivox.mini_.II_.V.3-v3.run
Congratulations, your DVB-T stick is now operational (including remote control).
(Also tested and working on Debian Lenny. Thanks!)
On other Linux Distributions
Although not as convenient as above, it should only take a couple of minutes to install the driver manually.
Prerequisites
- You need to have make, gcc, etc. installed.
- You need the revision control system 'mercurial' installed.
Compile and Install the Driver
Download version 4.95.0 of the firmware and copy it to your firmware directory.
wget http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw sudo mv dvb-usb-af9015.fw /lib/firmware/
On some distributions, you might have to move the firmware to /lib/firmware/2.6.xx/ where 2.6.xx is the version of your linux kernel.
Now download, compile, and install drivers for AF9015 from Antti Palosaari:
hg clone http://linuxtv.org/hg/~anttip/af9015/ cd af9015 make sudo make install
Congratulations, your DVB-T receiver should work now.
Remote Control Setup
If you want to use the IR remote control, you should tell the driver that you have a MSI DigiVox mini II V3.0. The driver can unfortunately not figure that out automatically since many devices have the very same 'lsusb -v'-fingerprint.
For this, you will need to pass the option 'remote=2' to the dvb_usb_af9015 module. Manually, this is done by the command (as root):
rmmod dvb_usb_af9015 modprobe dvb_usb_af9015 remote=2
To permanently store the option, you will need to edit modprobe's configuration file (usually /etc/modprobe.conf) and somewhere add the line:
options dvb_usb_af9015 remote=2
Furthermore, the device MSI DigiVox mini II V3.0 seems to have a hardware bug that causes keystrokes on the remote control to be repeated indefinitely. To circumvent this problem, you need to prevent your machine from recognizing the usb-stick as a keyboard.
echo "options usbhid quirks=0x15a4:0x9016:0x4" >> /etc/modprobe.d/usbhid rmmod usbhid; modprobe usbhid
Congratulations, your remote control should work now.
Developer Info
Status
Seems to be operational, including remote control.
Components Used:
- Afatech AF9015-N1
- The Tuner is a Microtune MT2061F
Driver
Several versions of the firmware can be found here.
People who own such a device
feel free to add yourself here, testers will always be needed!
| Name | |
|---|---|
| Niklas | officeman at freenet d0t de |
| Jons | linuxtv d0t org at metastasis d0t de |
| Jan | krupaj at mobilnews d0t cz |
| Patrick | linuxuser1 at gmx d0t net |
| tilt | tilde at tk hyph3n sls d0t de |
| bazillus | r at sliwi d0t org |
| Sylvio | smileyoschi at freenet d0t de (by the alternativ way) |
| Daniel Holm | d.holmen at gmail d0t com |
| Henrik | h e n r i k - l i n u x t v at p r a k d0t org |