TerraTec Cinergy C DVB-C: Difference between revisions
No edit summary |
No edit summary |
||
Line 111: | Line 111: | ||
'''NOTE:''' I wonder why this patch has not been merged into the trunk. Does it break anything? |
'''NOTE:''' I wonder why this patch has not been merged into the trunk. Does it break anything? |
||
In the new driver the remote works now without a patch. |
|||
Regarding the new driver. I have managed to fix Borodulin's patch and it is working in my box (Ubuntu 8.10 with 2.6.27.11). You can download it from here: [http://www.2shared.com/file/4816691/89b71858/s2-liplianin.html]. I tested successfully the patch against 21af81d9fb02. I also contacted Igor and Manu asking whether they could add the patch in their projects but no answer so far. |
|||
The remote controller seems to work now without patch. |
|||
input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input15 |
|||
===CI support=== |
===CI support=== |
Revision as of 23:53, 28 November 2009
A DVB-C PCI card from TerraTec.
Overview/Features
Looks to be a clone of the Azurewave/Twinhan AD-CP400 (VP-2040) [1]
Components Used
- NXP/Philips CU1216 module
- NXP/Philips TDA10023 (demodulator)
- Mantis (bridge)
Other Images
Identification
$ lspci -v -s 01:01.0 01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: TERRATEC Electronic GmbH Unknown device 1178 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at cfdff000 (32-bit, prefetchable) [size=4K]
$ lspci -vvn -s 01:01.0 01:01.0 0480: 1822:4e35 (rev 01) Subsystem: 153b:1178 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at cfdff000 (32-bit, prefetchable) [size=4K]
Making it Work
The card is working under Linux using the Mantis driver. Kernel 2.6.28 released on 24.12.2008 works with the mantis driver in the s2-liplianin repository.
The mantis-multiproto driver has been tested with Ubuntu Hardy (2.6.24?) on the 28.11.2008. CAM/CI is not working with current mantis for me. I have a crash when scanning or zapping with the CAM inserted. Take the CAM module out if you have one for the moment! (Is this also true for the new driver??)
Firmware
No firmware required.
Drivers
Current S2API Driver
This is the recommended driver. Install the latest mantis drivers like this.
sudo apt-get install mercurial linux-headers-$(uname -r) build-essential hg clone http://mercurial.intuxication.org/hg/s2-liplianin cd s2-liplianin make sudo make install sudo reboot
If you have a distribution which uses DKMS (like Ubuntu), Mantis with DKMS is a convenient way to install the driver and keep it running for new kernel releases.
Old Multiproto Driver
Old mantis-multiproto repository instructions. May not compile with latest kernels.
cd /usr/src sudo apt-get install mercurial sudo hg clone http://jusst.de/hg/mantis cd mantis sudo make sudo make install sudo reboot
Sample kernel output
Output from s2-liplianin driver under Kernel 2.6.28-15
[ 10.158595] Mantis 0000:04:09.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17 [ 10.158700] irq: 17, latency: 64 [ 10.158701] memory: 0xdfeff000, mmio: 0xffffc20000054000 [ 10.158706] found a VP-2040 PCI DVB-C device on (04:09.0), [ 10.158708] Mantis Rev 1 [153b:1178], irq: 17, latency: 64 [ 10.158710] memory: 0xdfeff000, mmio: 0xffffc20000054000 [ 10.161444] MAC Address=[00:08:ca:1d:b7:60] [ 10.161482] mantis_alloc_buffers (0): DMA=0x3d5f0000 cpu=0xffff88003d5f0000 size=65536 [ 10.161488] mantis_alloc_buffers (0): RISC=0x3d129000 cpu=0xffff88003d129000 size=1000 [ 10.161491] DVB: registering new adapter (Mantis dvb adapter) [ 10.681124] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 10.684607] TDA10023: i2c-addr = 0x0c, id = 0x7d [ 10.684609] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c [ 10.684612] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 10.684616] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 10.684684] mantis_ca_init (0): Registering EN50221 device [ 10.684961] mantis_ca_init (0): Registered EN50221 device [ 10.684971] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface [ 10.685048] input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input5 [ 10.815684] Mantis VP-2040 IR Receiver: unknown key: key=0x00 raw=0x00 down=1
With latest build from http://jusst.de/hg/mantis:
[ 47.563542] found a VP-2040 PCI DVB-C device on (01:01.0), [ 47.563543] Mantis Rev 1 [153b:1178], irq: 22, latency: 64 [ 47.563545] memory: 0xcfdff000, mmio: 0xf89de000 [ 47.566227] MAC Address=[00:08:ca:1c:73:1d] [ 47.566254] mantis_alloc_buffers (0): DMA=0x37850000 cpu=0xf7850000 size=65536 [ 47.566292] mantis_alloc_buffers (0): RISC=0x37913000 cpu=0xf7913000 size=1000 [ 47.566332] DVB: registering new adapter (Mantis dvb adapter) [ 48.086203] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 48.088334] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend 0x0c [ 48.088378] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 48.088424] DVB: registering frontend 0 (Philips TDA10023 DVB-C)... [ 54.367799] mantis_ack_wait (0): Slave RACK Fail !
Remote Control Support
For the old driver (Manu's) RC works after applying the following patch. See [2]
NOTE: I wonder why this patch has not been merged into the trunk. Does it break anything?
In the new driver the remote works now without a patch.
CI support
CI/CAM support for the optional CI module is not working yet (14.08.2024)
Known Issues
Working around i2c bus probing interference with ivtv
If the mantis module won't load (hangs) with the error message
mantis_ack_wait (0): Slave RACK Fail !
you should check [[3]]