Panasonic MN88472: Difference between revisions
Jump to navigation
Jump to search
(Add demod probe documentation) |
(TS mode) |
||
| Line 23: | Line 23: | ||
The T2 demod bank have a register that can be used to id the chip. Doing a read on register 0xFF should return the answer 0x2. |
The T2 demod bank have a register that can be used to id the chip. Doing a read on register 0xFF should return the answer 0x2. |
||
=== TS mode === |
|||
How to set chip ts mode. |
|||
==== Parallel TS with fixed clock ==== |
|||
* Write 0x00 to register 0x08 in T2 bank |
|||
* Write 0xE1 to register 0xD9 in T bank |
|||
==== Parallel TS with variable clock ==== |
|||
* Write 0x00 to register 0x08 in T2 bank |
|||
* Write 0xE3 to register 0xD9 in T bank |
|||
==== Serial TS with variable clock ==== |
|||
* Write 0x1D to register 0x08 in T2 bank |
|||
* Write 0xE3 to register 0xD9 in T bank |
|||
[[Category:Demodulator]] |
[[Category:Demodulator]] |
||
Revision as of 02:35, 31 October 2013
NM88472
The NM88472 is a DVB-T/DVB-T2/DVB-C demodulator chip manufactured by Panasonic.
I2C Adressing
The chips has 3 I2C addresses, one for each demodulator bank:
8 bit (7 bit) 0x38 (0x1c) - DVB-T2 0x30 (0x18) - DVB-T 0x34 (0x1a) - DVB-C
Demod Initialization
- Load init reg values for all 3 banks (T2/T and last C)
- Prepare DVB-T bank for firmware upload
- Load firmware for demod
- Check parity
Demod probe
The T2 demod bank have a register that can be used to id the chip. Doing a read on register 0xFF should return the answer 0x2.
TS mode
How to set chip ts mode.
Parallel TS with fixed clock
- Write 0x00 to register 0x08 in T2 bank
- Write 0xE1 to register 0xD9 in T bank
Parallel TS with variable clock
- Write 0x00 to register 0x08 in T2 bank
- Write 0xE3 to register 0xD9 in T bank
Serial TS with variable clock
- Write 0x1D to register 0x08 in T2 bank
- Write 0xE3 to register 0xD9 in T bank