DVBSky T9580: Difference between revisions
| Line 63: | Line 63: | ||
will test it with Ubuntu 13.04 and 13.10 |
will test it with Ubuntu 13.04 and 13.10 |
||
Update 25jan2014 |
Update 25jan2014 |
||
Ubuntu 13.04 kernel 3.11.1 working |
Ubuntu 13.04 kernel 3.11.1 working |
||
Ubuntu 13.04 kernel 3.12.1 working |
Ubuntu 13.04 kernel 3.12.1 working |
||
Revision as of 09:29, 26 January 2014
A combined DVB-T/DVB-T2 or DVB-C or DVB-S/DVB-S2 PCIe card from DVBSky.
The card is identical to Mystique SaTeCaBiX.
Overview/Features
- PCI-e x1 low profile card
- Single Tuner DVB-S/DVB-S2 card
- Single Tuner DVB-T/DVB-T2/DVB-C card
- IR Receiver
- Remote Controller
Identification
$ dmesg | grep -i dvb [ 14.236542] CORE cx23885[0]: subsystem: 4254:9580, board: DVBSKY T9580 [card=45,autodetected] [ 15.166644] cx23885_dvb_register() allocating 1 frontend(s) [ 15.166649] cx23885[0]: cx23885 based dvb card [ 15.278935] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)... [ 16.207179] DVB: registering new adapter (cx23885[0]) [ 16.207183] cx23885 0000:02:00.0: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)... [ 16.234648] DVBSKY PCIe MAC= 00:17:42:54:09:82 [ 16.234650] cx23885_dvb_register() allocating 1 frontend(s) [ 16.234652] cx23885[0]: cx23885 based dvb card [ 16.235747] DVB: registering new adapter (cx23885[0]) [ 16.235752] cx23885 0000:02:00.0: DVB: registering adapter 1 frontend 0 (Sit2 DVB-T2/C)... [ 16.263166] DVBSKY PCIe MAC= 00:18:42:54:09:83 [ 16.287996] Registered IR keymap rc-dvbsky [ 16.288073] input: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0/input15 [ 16.291630] rc0: cx23885 IR (DVBSKY T9580) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/rc/rc0
Technical Details
- Name: T9850/5950 Ver. 1.0a 121106
- Chip : Conexant PCIe A/V Decoder CX23885-15Z PFAC6621B 1249CN
- Chip : Si2168 30 1253A00081 (for DVB-C/DVB-T/DVB-T2)
- Chip : M88DS3103 4K51188.1 FPC1221NQ (for DVB-S/DVB-S2)
- The card is identical to Mystique SaTeCaBiX
Driver and firmware
- See DVBSky wiki page. Execute build_{x86|x64}_dvbc.sh for DVB-C driver!
- Firmware: dvb-fe-ds3103.fw
Making it Work
As of October 2013 it is not working with Kubuntu 13.10 and the media_build_bst_130806 Drivers from DVBSky according DVB-C.
The driver is loading and detecting the card, but more then a successful channel scan isn't possible.
No TV program can be watched. DVB-S/DVB-S2 and DVB-T/DVB-T2 wasn't tested by me.
Cable Working for Ubuntu 12.04
Jan 2014 Upgraded Ubuntu 12.04 to kernel 3.11.1 and used the media_build_bst_130806 from dvbsky support compiled it as in the manual . Cable driver loaded and tested, works fine with tvheadend and XBMC. i use oscam and smargo for decrypted channels. more info pe63@quicknet.nl
will test it with Ubuntu 13.04 and 13.10
Update 25jan2014
Ubuntu 13.04 kernel 3.11.1 working
Ubuntu 13.04 kernel 3.12.1 working
lspci output for this card is:
05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
Subsystem: Device [4254:9580]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at f7800000 (64-bit, non-prefetchable)
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: cx23885
Please feel free to correct this.
Update:
Works
Today I test this card with both DVB-S/S2 and DVB-T in Timisoara - Romania (DVB-T signal from Hungary - Szentes). I try to receive DVB-T2 signal from Serbia (Avala or Crveni Cot) but I don't receive any signal, maybe card doesn't work with DVB-T2 or my antenna doesn't receive any signal. I use VDR 2.1.2 with streamdev as back-end and VLC to watch channels and work very well, both adapter. I try w_scan and work.
I use latest driver from dvbsky website.