Emtec S830
Jump to navigation
Jump to search
This is a DVB-T USB Stick with dual tuners, remote control, and 'diversity' tuning capabilities (not sure about the last)
05/12/2007 Not working with v4l-dvb hg on kernel 2.6.22-14
http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019261.html
=> after adding the usbid as described in the patch above I get the exact same result as the user in the mailinglist .. led goes on , modules are loaded, but no lock on frequencies.
dmesg output after usbid patch
[ 183.731819] usb 2-7: new high speed USB device using ehci_hcd and address 3 [ 183.798267] usb 2-7: configuration #1 chosen from 1 choice [ 183.880076] dib0700: loaded with support for 5 different device-types [ 183.880182] dvb-usb: found a 'EMTEC S830 TD Stick' in cold state, will try to load a firmware [ 183.903331] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' [ 184.008207] dib0700: firmware started successfully. [ 184.259443] dvb-usb: found a 'EMTEC S830 TD Stick' in warm state. [ 184.259497] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 184.259585] DVB: registering new adapter (EMTEC S830 TD Stick) [ 184.378936] DVB: registering frontend 2 (DiBcom 7000PC)... [ 184.400418] MT2266: successfully identified [ 184.482671] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 184.482792] DVB: registering new adapter (EMTEC S830 TD Stick) [ 184.559678] DVB: registering frontend 3 (DiBcom 7000PC)... [ 184.561611] MT2266: successfully identified [ 184.642628] input: IR-receiver inside an USB DVB receiver as /class/input/input8 [ 184.642653] dvb-usb: schedule remote query interval to 150 msecs. [ 184.642658] dvb-usb: EMTEC S830 TD Stick successfully initialized and connected. [ 184.643047] usbcore: registered new interface driver dvb_usb_dib0700
LSUSB Output
Bus 002 Device 007: ID 1164:1e8c YUAN High-Tech Development Co., Ltd Device Descriptor:
bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1164 YUAN High-Tech Development Co., Ltd idProduct 0x1e8c bcdDevice 1.00 iManufacturer 1 YUANRD iProduct 2 STK7700D iSerial 3 0000000001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1
Device Qualifier (for other device speed):
bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1
Hardware
Demodulators (2x) 7000PC1-AXXXa-G
Tuners (2x) MT2266F
Its says PD-870 on the PCB though emtec sells it as S830, so clearly some rebranding is going on