Talk:Emtec S830
Do you have a working Windows installation ?
If it is the case you could perform a USB Snopping
The sequence is :
- Download and launch USBSnoop 1.8 : http://benoit.papillault.free.fr/usbsnoop/index.php.en
- Connect the USB tuner
- Check which driver correspond to the USB tuner ( "Present" = "Yes" column )
- Unplug the USB tuner
- Disconnect the aerial.
- Click on "Install" in USBSnoop for the driver corresponding to DVB tuner
- Replug the USB tuner
- Launch the TV app.
- Select 2 or 3 different channels ( there is no picture as there is no antenna ) with both tuners.
- Unplug the USB tuner
- Zip the logfile
- Post it. I'll compare it with the Pinnacle' snooping.
--Treza 12:23, 7 December 2007 (CET)
Where do i have to post it ? Also .. the led on the stick doesn't go on when i have the filter installed, yet dvbdream is able to tune and decode channels .. so i think the led isn't very important. BTW when in windows i don't insert the driver cd but let is use windows update.. it get installed as a HP DVB-T Tuner. maybe that helps --Waldo 15:30, 13 December 2007 (CET)
The HP device has probably the same USB IDs as yours.
Please send me the compressed snooping file at treza@chez.com
(Record without the antenna. When pictures are transmitted, the file becomes instantly huge ;-)
--Treza 11:16, 14 December 2007 (CET)