Hercules Smart TV Satellite
Card information
This card is a clone of Twinhan VP-1030 card.
Connectors:
- Sat input
- CI connector for CAM module
- Internal 8 pins connector (unknown purpose. Anyone knows ?)
- Internal sat output
Required software
Stable kernel
The card works perfectly in FTA mode with 2.6.7 or later kernel. De-scrambling is not supported.
In development
De-scrambling support is provided by the experimental dst_ca module. This driver is working but some polishing is still required. To de-scramble programs, you must have:
- Linux kernel 2.6.9 or greater
- DVB CVS
Required modules
Add dvb-bt8xx in your /etc/modules files and add these lines in you modprobe.conf:
options bttv i2c_hw=1 card=0x71 options dst_ca new_ca=1 install dvb-bt8xx /sbin/modprobe --ignore-install dvb-bt8xx; /sbin/modprobe dst
The dst_ca line and module is required only for de-scrambling (still in developement)
CAM tests
Feel free to update this table with other types of CAMs.
| Type | HW version | Firmware version | Results |
|---|---|---|---|
| SCM Red Viaccess | 1.0 | 1.06 | Working, but random failures are observed every few hours with TPS |
| Aston Viaccess | ? | ? | Not working |
For the record, I've similar results with Windows XP: Aston CAM does not work, and SCM CAM sometimes decode.
But SCM CAM is working much better with experimental Linux driver than with Windows.
As the dst_ca driver is still under development, the results of this page may change.