Kworld PCI Analog TV Card Lite

From LinuxTVWiki
Jump to navigation Jump to search

Warning: Pictures might not match as I using a clone which I bought in the Netherlands (unknown supplier).

Sold as  : KWorld PCI Analog TV Card Lite (PVR-TV 7134SE), listed in manual as PVR-TV 713X Vendor WWW : http://global.kworld-global.com/main/prod_in.aspx?mnuid=1248&modid=6&pcid=38&ifid=16&prodid=21&flag=1

lspci -vnn

02:0b.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev f0)
        Subsystem: Philips Semiconductors KWorld V-Stream Studio TV Terminator [1131:0000]
        Flags: bus master, medium devsel, latency 32, IRQ 23
        Memory at fffff800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
        Kernel driver in use: saa7134
        Kernel modules: saa7134

List of chips

Tuner Module           : Tena TNF-9533 ver B1 Bd
Analog IF Demodulator  : Philips TDA9801T
Radio Decoder          : Philips TEA5767
Analog multiplexer     : Philips HEF4052BT
PCI Bridge             : Philips SAA7135HL (also the A/V decoder)

Board indentification  : 713XTV VRE: J
Serial indentification : VS-TV7134RF

Lis of input connectors

From left to right

* FM (ariial) Antenne (optional)
* UHF/VHF Antenne
* Audio
* S-Video
* Video in
* UNKNOWN (marked with AV IN)
* Remote sensor

"dmesg" when loading the modules

Running from Linux sky 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux

[  228.668180] saa7130/34: v4l2 driver version 0.2.16 loaded
[  228.668264] saa7133[0]: found at 0000:02:0b.0, rev: 240, irq: 23, latency: 32, mmio: 0xfffff800
[  228.668277] saa7133[0]: subsystem: 1131:0000, board: Kworld Xpert TV PVR7134 [card=63,insmod option]
[  228.668318] saa7133[0]: board init: gpio is c0407f
[  228.712028] Registered IR keymap rc-pixelview
[  228.712205] input: saa7134 IR (Kworld Xpert TV PVR as /devices/pci0000:00/0000:00:1e.0/0000:02:0b.0/rc/rc0/input5
[  228.712354] rc0: saa7134 IR (Kworld Xpert TV PVR as /devices/pci0000:00/0000:00:1e.0/0000:02:0b.0/rc/rc0
[  228.816344] saa7133[0]: Huh, no eeprom present (err=-5)?
[  228.880159] tuner 0-0060: chip found @ 0xc0 (saa7133[0])
[  228.880307] tea5767 0-0060: type set to Philips TEA5767HN FM Radio
[  228.890766] tuner 0-0061: chip found @ 0xc2 (saa7133[0])
[  228.891005] tea5767 0-0060: type set to Philips TEA5767HN FM Radio
[  228.912021] tuner-simple 0-0061: creating new instance
[  228.912032] tuner-simple 0-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[  228.953531] saa7133[0]: registered device video0 [v4l2]
[  228.954649] saa7133[0]: registered device vbi0
[  228.955759] saa7133[0]: registered device radio0
[  228.987397] saa7134 ALSA driver for DMA sound loaded
[  228.987474] saa7133[0]/alsa: saa7133[0] at 0xfffff800 irq 23 registered as card -2

Testing the setup

Tested with Ziggo Cable Television (Location Leiden) as input which uses this frequenties.

 $ sudo apt-get install tvtime scantv
 $ sudo tvtime-scanner
 $ sudo scantv -C /dev/vbi0 -n PAL -f europe-west -o results.ini

Experiences

So far I have not seen/tested anything yet.


Misc

Q: if feasible "eeprom" output (from bttv tools) A: I am not sure how-to retrieve this information. The bttv tools does not seems to apply to this chipset. But just [info@rickvanderzwet.nl let me know] and I be happy to retrieve it.