AVerMedia AVerTV HD Express A918R
Jump to navigation
Jump to search
A DVB-T 34/54mm Express Card from AVerMedia.
It is currently not supported under Linux (Dec 2012).
Does not work out of the box, but can be correctly detected after source files update and compilation.
Remaining problem: couldn't get any working frequency/transponder.
Overview/Features
DVB-T tuner for 34/54mm express card slots that supports the following :
- Fit with 34mm & 54mm Slot
- H.264 / MPEG-2 HDTV Ready
- Real-time iPod / PSP Format Recording
- MHEG-5 & Digital Subtitle
- Teletext / TimeShift / EPG (Electronic Program Guide)
- PIP / POP Function
- Scheduled Recording
- Wake Up Recording from Stand By / Hibernate Mode
- 75 Ω TV Antenna
- see http://www.avermedia.com/Product/ProductDetail.aspx?Id=518
Package Included
- AVerTV Express Card 34mm
- plastic extension for 54mm slot compatibility
- Quick Installation Guide
- Installation CD (windows)
- TV Antenna
- RF Cable
- remote control
Components
- Afatech AF9035
- Afatech AF9033 (DVB-T front-end)
- NXP TDA18218HN
Firmware
- dvb-usb-af9035-02.fw [LINK=12.13.15.0 OFDM=5.17.9.1] / from palosaari.fi
Modules
- dvb_usb | dvb_usb_af9035 | af9033 | tda18218 | rc_core
Identification
dmesg
kernel usb 2-1.3: new high-speed USB device number 10 using ehci_hcd kernel usb 2-1.3: New USB device found, idVendor=07ca, idProduct=0918 kernel usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 kernel usb 2-1.3: Product: A918R kernel usb 2-1.3: Manufacturer: AVerMedia TECHNOLOGIES, Inc kernel usb 2-1.3: SerialNumber: 0000000000000 kernel usb 2-1.3: dvb_usb_v2: found a 'AVerMedia AverTV (A918R)' in cold state kernel usb 2-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw' kernel usb 2-1.3: dvb_usb_af9035: firmware version=12.13.15.0 kernel usb 2-1.3: dvb_usb_v2: found a 'AVerMedia AverTV (A918R)' in warm state kernel usb 2-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer kernel DVB: registering new adapter (AVerMedia AverTV (A918R)) kernel i2c i2c-7: af9033: firmware version: LINK=12.13.15.0 OFDM=5.17.9.1 kernel usb 2-1.3: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))... kernel i2c i2c-7: tda18218: NXP TDA18218HN successfully identified kernel Registered IR keymap rc-empty kernel input: AVerMedia AverTV (A918R) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc5/input17 kernel rc5: AVerMedia AverTV (A918R) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc5 kernel usb 2-1.3: dvb_usb_v2: schedule remote query interval to 500 msecs kernel usb 2-1.3: dvb_usb_v2: 'AVerMedia AverTV (A918R)' successfully initialized and connected
usb-devices
T: Bus=02 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07ca ProdID=0918 Rev=02.01 S: Manufacturer=AVerMedia TECHNOLOGIES, Inc S: Product=A918R S: SerialNumber=0000000000000 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=00 Prot=00 Driver=dvb_usb_af9035
Investigations
Patch proposal
- Necessary patch for dvb_usb_af9035 module compatibility with AverTV A918R card:
--- /drivers/media/dvb-core/dvb-usb-ids.h +++ /drivers/media/dvb-core/dvb-usb-ids.h @@ -233,6 +233,7 @@ #define USB_PID_AVERMEDIA_A835 0xa835 #define USB_PID_AVERMEDIA_B835 0xb835 +#define USB_PID_AVERMEDIA_A918R 0x0918 #define USB_PID_AVERMEDIA_1867 0x1867 #define USB_PID_AVERMEDIA_A867 0xa867
--- /drivers/media/usb/dvb-usb-v2/af9035.c
+++ /drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1125,6 +1125,8 @@
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835,
&af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A918R,
+ &af9035_props, "AVerMedia AverTV (A918R)", NULL) },
{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867,
&af9035_props, "AVerMedia HD Volar (A867)", NULL) },
Workaround
As long as 'modinfo dvb_usb_af9035 | grep v07CAp0918' is empty, compilation of af9035.c and dvb-usb-ids.h with patch above is necessary:
'modinfo dvb_usb_af9035' should report:
filename: /lib/modules/3.7.0-7-generic/kernel/drivers/media/usb/dvb-usb-v2/dvb-usb-af9035.ko firmware: dvb-usb-af9035-02.fw license: GPL description: Afatech AF9035 driver author: Antti Palosaari <crope@iki.fi> srcversion: 0B85164B0034E1BBA0A766D alias: usb:v07CAp0918d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v07CAp0825d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v07CApA867d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v07CAp1867d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v07CApB835d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v07CApA835d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CCDp0093d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v15A4p1003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v15A4p1002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v15A4p1001d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v15A4p1000d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v15A4p9035d*dc*dsc*dp*ic*isc*ip*in* depends: dvb_usb_v2,rc-core vermagic: 3.7.0-7-generic SMP mod_unload modversions 686 parm: adapter_nr:DVB adapter numbers (array of short)
Remaining problem: couldn't get any working frequency/transponder.
Scanning problem
- Test condition: kernel : 3.5.0-21 & 3.7.0-7 | firmware: dvb-usb-af9035-02.fw_12.5.13.0 | good signal strength (external antenna)
# w_scan -ft -t3 -F -c FR w_scan version 20120605 (compiled for DVB API 5.5) using settings for FRANCE DVB aerial DVB-T FR scan type TERRESTRIAL, channellist 5 Info: using DVB adapter auto detection. /dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Afatech AF9033 (DVB-T)": good :-) Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0) -_-_-_-_ Getting frontend capabilities-_-_-_-_ Using DVB API 5.6 frontend 'Afatech AF9033 (DVB-T)' supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO FREQ (174.00MHz ... 862.00MHz) -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ Scanning 8MHz frequencies... 474000: (time: 00:00) .../... 858498: (time: 10:13) ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!!
- tzap test with A918R
tzap -r TEST using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '~/.tzap/channels.conf' tuning to 586167000 Hz video pid 0x0200, audio pid 0x028a status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 00 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 |
- same tzap test made with same antenna and with AverTV_Super_007 (for comparison)
tzap -r TEST using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '~/.tzap/channels.conf' tuning to 586167000 Hz video pid 0x0200, audio pid 0x028a status 00 | signal bdbd | snr 3535 | ber 0001fffe | unc 0000000c | status 1f | signal bebe | snr fefe | ber 00000000 | unc ffffffff | FE_HAS_LOCK status 1f | signal bdbd | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal bebe | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal bdbd | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal bdbd | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal bebe | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
A918R tuning is then not working as expected.
Comments
1] still some doubt on exact dvb-usb-af9035-02.fw firmware to be used (several LINK/OFDM versions tested)
2] AVerTV_Volar_HD_PRO_A835 using same components is reported to work including tuning/scanning;
3] function "static int af9035_tuner_attach(struct dvb_usb_adapter *adap)" of af9035.c does not include any gpio settings for tda18218: problem or not ? to be clarified.
Then still some hope, but no solution identified by now.