Xceive XC5000/XC4000
This article discusses a family of silicon ICs, produced by Xceive, that combine RF tuner and analog IF demodulator functions within one chip. In addition, this page addresses the drivers that support these chips, as well as their firmware requirements.
Features
The XC5000 has robust support for both analog and digital signals; it supports the analog TV broadcast standards (NTSC, PAL, & SECAM), CVBS, SIF and most digital TV standards (ATSC, DVB-C, DVB-T, DMB-T, & ISDB-T).
Drivers
There are two drivers versions:
- An in kernel driver - kernels 2.6.24+ will have built in support for the XC5000
- An out-of-tree 3rd party driver - from mrec.
Feature Support
Firmware Information
The information in this section is directed only towards support for the in-kernel driver. For 3rd party driver requirements and/or information, please consult those sources directly.
How to Obtain the Firmware
1) Download the compressed Windows driver file & the XC5000 firmware extraction script "extract.sh". From the commandline you can simply run:
wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip http://www.steventoth.net/linux/xc5000/extract.sh
2) Run the perl extraction script
sh extract.sh- From the output you will observe that the script first recovers the Windows driver file "hcw85bda.sys" from the zip archive, and then extracts the firmware contained within it into the current directory.
3) As per the instructions found at the end of the script's output, manually copy the generated firmware file to your firmware directory
cp dvb-fe-xc5000-1.1.fw /lib/firmware
Internal Links
External Links
- XC5000 product page
- XC4000 product page
- mrec's mcentral wiki - offers alternative, out of kernel, drivers for some xc5000 based devices