Compro VideoMate DVB-T220
Jump to navigation
Jump to search
Card features
- PCI interface
- Antenna (Composite), Remote and S-Video In
Chipsets
- PCI Capture Card: SAA7130HL
- COFDM Demodulator: MT352
- Tuner: QT1010
Images
How to make it work
Not yet working :( It detects as a T200 but doesn't work.
Module parameters
modprobe saa7134-dvb gives
# dmseg [ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded [ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000 [ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] [ 45.569753] saa7130[0]: board init: gpio is 843f00 [ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7 [ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff [ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff [ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom [ 45.755532] saa7130[0]: registered device video0 [v4l2] [ 45.755550] saa7130[0]: registered device vbi0 [ 45.873425] saa7134 ALSA driver for DMA sound loaded [ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2 [ 45.943354] saa7130[0]/dvb: frontend initialization failed
# lspci -vvvnn 04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Compro Technology, Inc. Videomate DVB-T200 [185b:c901] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 84 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
RegSpy dumps
SAA7130 Card [0]: Vendor ID: 0x1131 Device ID: 0x7130 Subsystem ID: 0xc901185b 3 states dumped ---------------------------------------------------------------------------------- SAA7130 Card - State 0: SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: 04 * (00000100) SAA7134_TS_PARALLEL_SERIAL: 00 * (00000000) SAA7134_TS_SERIAL0: 00 * (00000000) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 00 * (00000000) SAA7134_TS_DMA1: 00 * (00000000) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) Changes: State 0 -> State 1: SAA7134_TS_PARALLEL: 04 -> e4 (000-----) SAA7134_TS_PARALLEL_SERIAL: 00 -> bb (0-000-00) SAA7134_TS_SERIAL0: 00 -> 40 (-0------) SAA7134_TS_DMA0: 00 -> 37 (--00-000) SAA7134_TS_DMA1: 00 -> 01 (-------0) 5 changes ---------------------------------------------------------------------------------- SAA7130 Card - State 1: SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: e4 * (11100100) (was: 04) SAA7134_TS_PARALLEL_SERIAL: bb * (10111011) (was: 00) SAA7134_TS_SERIAL0: 40 * (01000000) (was: 00) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 37 (00110111) (was: 00) SAA7134_TS_DMA1: 01 (00000001) (was: 00) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) Changes: State 1 -> State 2: SAA7134_TS_PARALLEL: e4 -> 04 (111-----) (same as 0) SAA7134_TS_PARALLEL_SERIAL: bb -> 00 (1-111-11) (same as 0) SAA7134_TS_SERIAL0: 40 -> 00 (-1------) (same as 0) 3 changes ---------------------------------------------------------------------------------- SAA7130 Card - State 2: SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: 04 (00000100) (was: e4) SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) (was: bb) SAA7134_TS_SERIAL0: 00 (00000000) (was: 40) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 37 (00110111) SAA7134_TS_DMA1: 01 (00000001) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) end of dump