Compro VideoMate E600F
Jump to navigation
Jump to search
| This article is a stub or is incomplete. |
| This article requires expansion. Please help add informative information if you can. |
This is a PCIe analog TV/FM tuner card with real-time hardware MPEG-2 encoder.
It is not supported under Linux yet (non-recognized).
Overview/Features
Analog TV card (NTSC/SECAM/PAL) which supports:
- 480i/576i component video input,
- TV stereo and SAP (MTS/NICAM/A2/EIAJ).
This card help you to:
- Watch analog TV and listen to FM radio on PC,
- Record TV shows with built-in real-time HQ MPEG-2 Encoder to watch them later.
Components Used
- Conexant CX23885-13Z PCIe A/V Decoder,
- Conexant CX23417-11Z MPEG II A/V Encoder,
- XCeive XC2028ACQ Video Tuner.
Other images
CX23885-13Z PCIe A/V Decoder
CX23417-11Z MPEG II A/V Encoder
XCeive XC2028ACQ Tuner
Identification
lspci
Output of lspci:
02:00.0 Multimedia video controller: Conexant Device 8852 (rev 02)
Output of lspci -n:
02:00.0 0400: 14f1:8852 (rev 02)
Output of lspci -vvnn:
02:00.0 Multimedia video controller [0400]: Conexant Device [14f1:8852] (rev 02)
Subsystem: Compro Technology, Inc. Device [185b:e800]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fd600000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data <?>
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [200] Virtual Channel <?>
dmesg
Output of dmesg:
cx23885 driver version 0.0.1 loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 cx23885[0]: Your board isn't known (yet) to the driver. You can cx23885[0]: try to pick one of the existing card configs via cx23885[0]: card=<n> insmod option. Updating to the latest cx23885[0]: version might help as well. cx23885[0]: Here is a list of valid choices for the card=<n> insmod option: cx23885[0]: card=0 -> UNKNOWN/GENERIC cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 cx23885[0]: card=4 -> DViCO FusionHDTV5 Express cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H CORE cx23885[0]: subsystem: 185b:e800, board: UNKNOWN/GENERIC [card=0,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered cx23885_dev_checkrevision() Hardware revision = 0xb0 cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfd600000 PCI: Setting latency timer of device 0000:02:00.0 to 64