Archived:ASUS P7131 Hybrid-V4L

See also:

• Cardlist.saa7134
• Generic SAA7134 Card Installation

Remote control

An IR remote control is supplied. There is a sensor cable that must be plugged into the card.

Card features

• PCI [1043:4876]
• Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
• PAL
• DVB-T
• Video/audio decoder:
• Analog demodulator:
• TV tuner: ??
• FM radio chip: ??

ASUS MyCinema P7131 Hybrid

   * 00:0c.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
   * saa7134 card=78 tuner=54 # for analog signal 

   * In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config
   * change the entry
   * .request_firmware = NULL,
   * to
   * .request_firmware = philips_tu1216_request_firmware,
   * run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware
   * modprobe saa7134 card=78 gpio_tracking=1
   * see http://www.spinics.net/lists/vfl/msg27672.html
   * STOP PRESS - the Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112.
   * The card can then be brought up with "modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1". You may also need to modprobe saa7134-dvb and saa7134-alsa. This works now but may not continue to do so.

Card connectors

• PAL TV RF signal:
• DVB-T RF signal:
• Video Input: S-Video
• FM radio RF signal: Internal RC jack with flying wire to IEC connector
• IR-Remote: 2.5mm jack

Module Options

For analog signal (autodetected?):

 saa7134 card=78 tuner=54

Links

• http://www.mail-archive.com/linux-dvb@linuxtv.org/msg22647.html (Remote control)
• http://gentoo-wiki.com/Saa7134_quick_guide