X3M Digital HPCe2100
Jump to navigation
Jump to search
A hybrid DVB-T PCIe card from X3M Digital.
Overview/Features
- analog
- digital terrestrial DVB-T TV
- FM radio
- A/V inputs
Components Used
- CX23885
- CX2341X
- XC5000?
- LGS8GL5?
Identification
lspci -vv
02:00.0 Multimedia video controller: Conexant Device 8852 (rev 02) Subsystem: Conexant Device ec80 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data <?> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [200] Virtual Channel <?> Kernel driver in use: cx23885 Kernel modules: cx23885
Sample kernel output
dmesg
cx23885 driver version 0.0.1 loaded cx23885 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 cx23885[0]: Your board isn't known (yet) to the driver. You can cx23885[0]: try to pick one of the existing card configs via cx23885[0]: card=<n> insmod option. Updating to the latest cx23885[0]: version might help as well. cx23885[0]: Here is a list of valid choices for the card=<n> insmod option: cx23885[0]: card=0 -> UNKNOWN/GENERIC cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 cx23885[0]: card=4 -> DViCO FusionHDTV5 Express cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express CORE cx23885[0]: subsystem: 14f1:ec80, board: UNKNOWN/GENERIC [card=0,autodetected] cx23885[0]: i2c bus 0 registered cx23885[0]: i2c bus 1 registered cx23885[0]: i2c bus 2 registered cx23885_dev_checkrevision() Hardware revision = 0xb0 cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xfe800000 cx23885 0000:02:00.0: setting latency timer to 64
External Links
- HPCe2100 product page
- Similar to the Mygica Hybird PCI-E TV Card X8506, as seen: