AVerMedia AVerTV Hybrid Speedy PCI-E

From LinuxTVWiki
Jump to navigation Jump to search
caption


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


What type of device and who released it?

Is it supported under Linux? Are there experimental drivers? (if yes, see below)

Overview/Features

Discuss the features and facets of the device here ... this means you

Components Used

list the hardware ICs and modules used by the device here ... this means you

TDA18271HDC1
Intel WJCE6353
NXP SAA7136E/1/G & PCI-E bridge NXP SAA7160ET

Identification

03:00.0 0480: 1131:7160 (rev 03)

       Subsystem: 1461:1455    
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- 
       Latency: 0, Cache Line Size: 32 bytes                                                                
       Interrupt: pin A routed to IRQ 17                                                                    
       Region 0: Memory at ea100000 (64-bit, non-prefetchable) [size=1M]                                    
       Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Count=1/32 Enable-                     
               Address: 0000000000000000  Data: 0000                                                        
       Capabilities: [50] Express (v1) Endpoint, MSI 00                                                     
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us                       
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-                                      
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                           
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-                                         
                       MaxPayload 128 bytes, MaxReadReq 128 bytes                                           
               DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-                          
               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us             
                       ClockPM- Suprise- LLActRep- BwNot-                                                   
               LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-                             
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                                       
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-           
       Capabilities: [74] Power Management version 2                                                        
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)                   
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
       Capabilities: [80] Vendor Specific Information <?>                                                   
       Capabilities: [100] Vendor Specific Information <?>                                                  
       Kernel driver in use: SAA716x Hybrid                                                                 
       Kernel modules: saa716x_hybrid                                  


Other Images

use the included code to insert other images if necessary ...

Making it Work

Firmware

is there any firmware specific information for this device? if so, list it here ... this means you

Drivers

drivers that can recognize this card here http://jusst.de/hg/saa716x/ so card recognizes as dvb device but no frontends currently supported

Sample kernel output

SAA716x Hybrid 0000:03:00.0: PCI INT A disabled

SAA716x Hybrid 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

SAA716x Hybrid 0000:03:00.0: setting latency timer to 64

DVB: registering new adapter (SAA716x dvb adapter)

Remote Control Support

discuss support for the remote control here

External Links

http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=425