TerraTec Cinergy C DVB-C
Jump to navigation
Jump to search
File:Filename
caption
This article is a stub or is incomplete. |
This article requires expansion. Please help add informative information if you can. |
A DVB-C PCI card from TerraTec.
Drivers: work in progress; see below
Overview/Features
Looks to be a clone of the Azurewave/Twinhan AD-CP400 (VP-2040) [1]
Components Used
- NXP/Philips CU1216 module
- NXP/Philips TDA10023 (demodulator)
- Mantis (bridge)
Identification
$ lspci -v -s 01:01.0 01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: TERRATEC Electronic GmbH Unknown device 1178 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at cfdff000 (32-bit, prefetchable) [size=4K]
$ lspci -vvn -s 01:01.0 01:01.0 0480: 1822:4e35 (rev 01) Subsystem: 153b:1178 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at cfdff000 (32-bit, prefetchable) [size=4K]
Other Images
Making it Work
Firmware
No firmware required.
Installing on Ubuntu Hardy with Mantis-Multiproto driver
Foreword
This has been tested the 28.11.2008. CAM/CI is not working with current mantis for me. I have a crash when scanning or zapping with the CAM inserted. Take the CAM module out if you have one for the moment!
Install mantis driver
cd /usr/src sudo apt-get install mercurial sudo hg clone http://jusst.de/hg/mantis cd mantis sudo make sudo make install sudo reboot
Sample kernel output
With latest build from http://jusst.de/hg/mantis:
[ 47.563542] found a VP-2040 PCI DVB-C device on (01:01.0), [ 47.563543] Mantis Rev 1 [153b:1178], irq: 22, latency: 64 [ 47.563545] memory: 0xcfdff000, mmio: 0xf89de000 [ 47.566227] MAC Address=[00:08:ca:1c:73:1d] [ 47.566254] mantis_alloc_buffers (0): DMA=0x37850000 cpu=0xf7850000 size=65536 [ 47.566292] mantis_alloc_buffers (0): RISC=0x37913000 cpu=0xf7913000 size=1000 [ 47.566332] DVB: registering new adapter (Mantis dvb adapter) [ 48.086203] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 48.088334] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend 0x0c [ 48.088378] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 48.088424] DVB: registering frontend 0 (Philips TDA10023 DVB-C)... [ 54.367799] mantis_ack_wait (0): Slave RACK Fail !
Remote Control Support
RC works after applying the following patch. See [2]
NOTE: I wonder why this patch has not been merged into the trunk. Does it break anything?
CI support
CI/CAM support for the optional CI module is not working yet (2024-08-15)