TerraTec Cinergy C DVB-C
This article is a stub or is incomplete. |
This article requires expansion. Please help add informative information if you can. |
A DVB-C PCI card from TerraTec.
Drivers: work in progress; see below
Overview/Features
Looks to be a clone of the Azurewave/Twinhan AD-CP400 (VP-2040) [1]
Components Used
- NXP/Philips CU1216 module
- NXP/Philips TDA10023 (demodulator)
- Mantis (bridge)
Identification
$ lspci -v -s 01:01.0 01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01) Subsystem: TERRATEC Electronic GmbH Unknown device 1178 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at cfdff000 (32-bit, prefetchable) [size=4K]
$ lspci -vvn -s 01:01.0 01:01.0 0480: 1822:4e35 (rev 01) Subsystem: 153b:1178 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 63750ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at cfdff000 (32-bit, prefetchable) [size=4K]
Other Images
Making it Work
Firmware
No firmware required.
Installing on Ubuntu Hardy with Mantis-Multiproto driver
Foreword
This has been tested the 28.11.2008. CAM/CI is not working with current mantis for me. I have a crash when scanning or zapping with the CAM inserted. Take the CAM module out if you have one for the moment!
Install mantis driver
Install the latest mantis drivers like this:
sudo apt-get install mercurial hg clone http://mercurial.intuxication.org/hg/s2-liplianin cd s2-liplianin make sudo make install sudo reboot
Old multiproto-mantis repository intstructions. May not compile with latest kernels.
cd /usr/src sudo apt-get install mercurial sudo hg clone http://jusst.de/hg/mantis cd mantis sudo make sudo make install sudo reboot
Sample kernel output
With latest build from http://jusst.de/hg/mantis:
[ 47.563542] found a VP-2040 PCI DVB-C device on (01:01.0), [ 47.563543] Mantis Rev 1 [153b:1178], irq: 22, latency: 64 [ 47.563545] memory: 0xcfdff000, mmio: 0xf89de000 [ 47.566227] MAC Address=[00:08:ca:1c:73:1d] [ 47.566254] mantis_alloc_buffers (0): DMA=0x37850000 cpu=0xf7850000 size=65536 [ 47.566292] mantis_alloc_buffers (0): RISC=0x37913000 cpu=0xf7913000 size=1000 [ 47.566332] DVB: registering new adapter (Mantis dvb adapter) [ 48.086203] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 48.088334] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend 0x0c [ 48.088378] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 48.088424] DVB: registering frontend 0 (Philips TDA10023 DVB-C)... [ 54.367799] mantis_ack_wait (0): Slave RACK Fail !
Remote Control Support
RC works after applying the following patch. See [2]
NOTE: I wonder why this patch has not been merged into the trunk. Does it break anything?
CI support
CI/CAM support for the optional CI module is not working yet (2024-08-14)