Linux4Media cineS2 DVB-S2 Twin Tuner
Jump to navigation
Jump to search
A nGene based DVB-S2 PCIe card from Ex-IT! Information Technology GmbH
Overview/Features
- PCI-e x1
- Dual Tuner DVB-S/S2 card
- Ultra-Low Profile
Components Used
- PCIe bridge MICRONAS APB 7202A B2
- Dual demodulator STM STV0900B
- Tuner STM STV6110A
- Dual LNB STM LNBH24
Other Images
Identification
$ lspci -vvvnn 02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720] Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K] Region 1: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ngene Kernel modules: ngene
Making it Work
Make sure that the external power supply is connected!!!
Experimental driver (recommended)
The experimental merge of the original driver with the v4l-dvb project is capable of using both tuners.
$ git clone git://projects.vdr-developer.org/mediapointer-dvb-s2.git $ cd mediapointer-dvb-s2 $ make menuconfig --> Multimedia support --> Video capture adapters <M> Micronas nGene support --> <M> selektieren, wenn nicht schon vorhanden $ make $ sudo make install $ sudo depmod -ae --> zur Sicherheit $ sudo modprobe ngene
Original driver
"To install the driver you need a Linux kernel 2.6.19 or higher. Other kernel versions might also work but are currently not tested." (see ngene/README)
The current implementation is only capable of using one tuner and doesn't support the S2API.
$ wget http://www.media-pointer.de/WebRoot/Store21/Shops/62290022/4AB0/D7EA/2E65/766B/4B4E/C0A8/28BE/FE04/ngene.tgz $ tar xzf ngene.tgz $ cd ngene
Delete or uncomment line 57 and 59 in file ngene.c to ensure that variable adapter_nr
will be set.
//#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,28) DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); //#endif
$ make install $ modprobe dvb_ngene