Emtec S810
Jump to navigation
Jump to search
A DVB-T and DVB-T2 USB stick from Emtec.
Overview/Features
- USB interface
- Input: antenna (composite)
Components Used
- DiBcom 7000PC
Identification
# lsusb -vvv Bus 001 Device 033: ID 1164:2edc YUAN High-Tech Development Co., Ltd STK7700D Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1164 YUAN High-Tech Development Co., Ltd idProduct 0x2edc bcdDevice 1.00 iManufacturer 1 YUANRD iProduct 2 STK7700D iSerial 3 0000000001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x002e bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1
Making it Work
It is supported by the kernel (tested with 5.10.0-23 kernel version on Debian).
Firmware
The device requires the dvb-usb-dib0700-1.20.fw firmware.
Drivers
The device requires dib0700 driver.
Sample Kernel Output
# dmesg [19178.897365] usb 1-1.1: new high-speed USB device number 33 using ehci-pci [19179.006257] usb 1-1.1: New USB device found, idVendor=1164, idProduct=2edc, bcdDevice= 1.00 [19179.006261] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19179.006264] usb 1-1.1: Product: STK7700D [19179.006265] usb 1-1.1: Manufacturer: YUANRD [19179.006267] usb 1-1.1: SerialNumber: 0000000001 [19179.006755] dvb-usb: found a 'Yuan PD378S' in cold state, will try to load a firmware [19179.006822] usb 1-1.1: firmware: direct-loading firmware dvb-usb-dib0700-1.20.fw [19179.208250] dib0700: firmware started successfully. [19179.721517] dvb-usb: found a 'Yuan PD378S' in warm state. [19179.721605] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [19179.721758] dvbdev: DVB: registering new adapter (Yuan PD378S) [19179.721764] usb 1-1.1: media controller created [19179.722292] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [19179.954253] usb 1-1.1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)... [19179.954264] dvbdev: dvb_create_media_entity: media entity 'DiBcom 7000PC' registered. [19180.184370] dib0070: DiB0070: successfully identified [19180.184822] Registered IR keymap rc-dib0700-rc5 [19180.185034] rc rc0: Yuan PD378S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc0 [19180.185170] rc rc0: lirc_dev: driver dib0700 registered at minor = 0, scancode receiver, no transmitter [19180.185231] input: Yuan PD378S as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/rc/rc0/input21 [19180.186631] dvb-usb: schedule remote query interval to 50 msecs. [19180.186635] dvb-usb: Yuan PD378S successfully initialized and connected.
Remote Control Support
Not tested.