User:Woodsb02
I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.
Bold textNote: I have recently got this to work with linux! Here is how I did it: I edited linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h and changed USB_PID_WT220U_COLD from 0x0222 to 0x0220 and everything worked fine. Thanks to jochen and David May.
lsusb gives the following output:
Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E
The chips inside it have the following writing:
1) EPCOS X7350P 3356 MXT5
2) MT2060 MOE360007J 0305-A3
3) I3 D AT02
4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612
5) 1B15C
6) AIPE12
Other text on the board:
- PD-300 REV 2.3 MADE IN TAIWAN
- BT B 94V-0 0522
- T0540113 (sticker)
News:
It will work but ONLY if you warm boot it inside windows first with the Yakumo BDA driver, then warm boot for instance a KENOTIX 2006 easter-rc4 livecd.
The second you unplug it and replug it, it will not come back up as there's something not right with the linux firmware usb loading side.
Is this problem of a cold boot firmware well known? And is there a fix?
Here's my info for my card
$ lsusb -v
Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x14aa AVerMedia (again) or C&E
idProduct 0x0221
bcdDevice 5.21
iManufacturer 1 Digital TV Receiver
iProduct 2 Digital TV Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 64
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 450mA "
$ dmesg
dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.
usbcore: registered new driver dvb_usb_dtt200u "
$ lsmod
dvb_usb_dtt200u 8708 0
dvb_usb 16136 1 dvb_usb_dtt200u
dvb_core 73792 1 dvb_usb
dvb_pll 10372 1 dvb_usb "