User:Woodsb02
I have recently bought a Yuan PD300 mini usb tv card. It looks much like a usb disk/stick and I am hoping to get it working in linux.
Note: I have recently got this to work with linux!
Here is how I did it:
I edited
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
and changed USB_PID_WT220U_COLD from 0x0222 to 0x0220 and everything worked fine. Thanks to jochen and David May.
Other details of card:
lsusb gives the following output:
Bus 004 Device 004: ID 14aa:0220 AVerMedia (again) or C&E
The chips inside it have the following writing:
1) EPCOS X7350P 3356 MXT5
2) MT2060 MOE360007J 0305-A3
3) I3 D AT02
4) CY7C68013a-56LFXC 0515 B 04 KOR CYP 614612
5) 1B15C
6) AIPE12
Other text on the board:
- PD-300 REV 2.3 MADE IN TAIWAN
- BT B 94V-0 0522
- T0540113 (sticker)
Here's my info for my card
$ lsusb -v
Bus 001 Device 003: ID 14aa:0221 AVerMedia (again) or C&E
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x14aa AVerMedia (again) or C&E
idProduct 0x0221
bcdDevice 5.21
iManufacturer 1 Digital TV Receiver
iProduct 2 Digital TV Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 64
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 450mA "
$ dmesg
dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.
usbcore: registered new driver dvb_usb_dtt200u "
$ lsmod
dvb_usb_dtt200u 8708 0
dvb_usb 16136 1 dvb_usb_dtt200u
dvb_core 73792 1 dvb_usb
dvb_pll 10372 1 dvb_usb "